Note
Go to the end to download the full example code.
Double gyre - LCS with particles
Drift of particles in an idealised (analytical) eddy current field, plotted on top of the LCS. This takes some minutes to calculate.
from datetime import datetime, timedelta
import matplotlib.pyplot as plt
from opendrift.readers import reader_double_gyre
from opendrift.models.oceandrift import OceanDrift
Setting some parameters
duration = timedelta(seconds=12) # T
time_step=timedelta(seconds=.5)
time_step_output=timedelta(seconds=.5)
delta=.02 # spatial resolution
steps = int(duration.total_seconds()/
time_step_output.total_seconds() + 1)
o = OceanDrift(loglevel=20)
20:13:45 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
Note that Runge-Kutta here makes a difference to Euler scheme
o.set_config('drift:advection_scheme', 'runge-kutta4')
o.set_config('environment:fallback:land_binary_mask', 0)
double_gyre = reader_double_gyre.Reader(epsilon=.25, omega=0.628, A=0.1)
print(double_gyre)
o.add_reader(double_gyre)
===========================
Reader: double_gyre
Projection:
+proj=stere +lat_0=0 +lon_0=0 +lat_ts=0 +units=m +a=6.371e+06 +e=0 +no_defs
Coverage: [degrees]
xmin: 0.000000 xmax: 2.000000
ymin: 0.000000 ymax: 1.000000
Corners (lon, lat):
( 0.00, 0.00) ( 0.00, 0.00)
( 0.00, 0.00) ( 0.00, 0.00)
Vertical levels [m]:
Not specified
Available time range:
start: None end: None step: None
Variables:
x_sea_water_velocity
y_sea_water_velocity
sea_water_speed - derived from ['x_sea_water_velocity', 'y_sea_water_velocity']
===========================
Calculate Lyapunov exponents
times = [double_gyre.initial_time +
n*time_step_output for n in range(steps)]
lcs = o.calculate_ftle(time=times, time_step=time_step,
duration=duration, delta=delta, RLCS=False)
20:13:45 INFO opendrift.models.basemodel:4670: No reader provided, using first available:
20:13:45 INFO opendrift.models.basemodel:4672: double_gyre
20:13:45 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:00
20:13:45 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:13:45 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:13:45 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:13:45 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:13:45 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:13:45 DEBUG opendrift.config:178: Overwriting config item seed:z
20:13:45 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:13:45 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:13:45 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:13:49 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:13:49 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:13:49 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:13:49 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:13:49 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:13:50 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:13:50 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:13:50 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:13:50 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:12 to 2000-01-01 00:00:00)
20:13:50 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:13:50 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:13:50 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:13:50 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:13:50 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 INFO opendrift.models.basemodel:946: All points are in ocean
20:13:50 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:13:50 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:13:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 1 of 24 - 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:50 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:13:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:13:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314159 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350363 (min) 0.458417 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.313942 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346022 (min) 0.449706 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.313976 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346012 (min) 0.449184 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4252114301131e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314152 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340642 (min) 0.436609 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:50 DEBUG opendrift.models.basemodel:2054: -6.791877769091565e-20 <- latitude -> 8.892453777469594e-06
20:13:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7903075709058422e-05
20:13:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
20:13:50 DEBUG opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
20:13:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 33 elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 33 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 33 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.313882 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340645 (min) 0.437706 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615835e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314125 (min) 0.314158 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334398 (min) 0.423067 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626557e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.314152 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334463 (min) 0.422756 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626562e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.313815 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32834 (min) 0.404284 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 3 of 24 - 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:50 DEBUG opendrift.models.basemodel:2054: -6.317631038286484e-20 <- latitude -> 8.935138653086711e-06
20:13:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794532751525605e-05
20:13:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4964 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
20:13:50 DEBUG opendrift.readers.basereader.variables:829: Masking 36 elements outside coverage
20:13:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 36 elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 36 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 36 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314148 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32844 (min) 0.404971 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177553e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313917 (min) 0.313784 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322764 (min) 0.384431 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188284e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313829 (min) 0.313791 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322777 (min) 0.384356 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690964e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.314108 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318125 (min) 0.361744 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:50 DEBUG opendrift.models.basemodel:2054: -5.8544892557527e-20 <- latitude -> 8.958543111123946e-06
20:13:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964127567209288e-05
20:13:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32959386423121e-12 degrees.
20:13:50 DEBUG opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
20:13:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 33 elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 33 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 33 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313711 (min) 0.313931 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318156 (min) 0.360175 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798271e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.313703 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31514 (min) 0.336394 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195809004e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.313681 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31511 (min) 0.336334 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195809004e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.314028 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313972 (min) 0.314468 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 5 of 24 - 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:50 DEBUG opendrift.models.basemodel:2054: -5.240932928811748e-20 <- latitude -> 8.971787574516507e-06
20:13:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972625336327005e-05
20:13:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22745691885709e-12 degrees.
20:13:50 DEBUG opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
20:13:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 26 elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 26 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 26 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313986 (min) 0.313994 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314038 (min) 0.313997 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298349002e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313897 (min) 0.313258 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315074 (min) 0.339212 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370464e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.313245 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315103 (min) 0.339067 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21659128637049e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313761 (min) 0.314124 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318117 (min) 0.362996 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:13:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:50 DEBUG opendrift.models.basemodel:2054: -4.4290457382484103e-20 <- latitude -> 8.979512443669965e-06
20:13:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976381854085155e-05
20:13:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851683e-12 degrees.
20:13:50 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:13:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:13:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313639 (min) 0.313765 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318316 (min) 0.361191 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332915e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313411 (min) 0.314077 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322982 (min) 0.38143 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348361e-12 degrees.
20:13:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313144 (min) 0.314068 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322862 (min) 0.383311 (max)
20:13:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846293e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312705 (min) 0.313512 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328754 (min) 0.404214 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 7 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -3.551886887949365e-20 <- latitude -> 8.984798933589139e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797780556079282e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383022e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 12 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 12 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 12 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.313452 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328566 (min) 0.400297 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316825e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313466 (min) 0.31321 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334922 (min) 0.42452 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327514e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313323 (min) 0.313155 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334909 (min) 0.423716 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327542e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313561 (min) 0.313242 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340697 (min) 0.439622 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -2.6135995106957177e-20 <- latitude -> 8.987290109084847e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977992537304218e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311463e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.314012 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340527 (min) 0.427122 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798029e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.313982 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346191 (min) 0.453925 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808778e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31403 (min) 0.313904 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346007 (min) 0.453329 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306097e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.313974 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350333 (min) 0.462692 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 9 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -2.3237522455384726e-20 <- latitude -> 8.989518472967643e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797745234426238e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.279611954792688e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.31412 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350358 (min) 0.458405 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.288304460781962e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313777 (min) 0.314055 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353034 (min) 0.464794 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290035e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313708 (min) 0.314038 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352847 (min) 0.464024 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778732e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31364 (min) 0.314058 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353802 (min) 0.465764 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -1.9404839422486143e-20 <- latitude -> 8.990601234738437e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976364708005416e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776623e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313521 (min) 0.314 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353365 (min) 0.467284 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268566e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313866 (min) 0.314107 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352224 (min) 0.466348 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677061e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313825 (min) 0.314159 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35189 (min) 0.465547 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771251e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314049 (min) 0.314118 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349886 (min) 0.459848 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 11 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -1.8646651773938155e-20 <- latitude -> 8.990606114181837e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974647905272877e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472759874e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313763 (min) 0.314018 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350275 (min) 0.460266 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252494e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.313808 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345887 (min) 0.451806 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257819e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.313888 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34602 (min) 0.45136 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252462e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31398 (min) 0.313934 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340789 (min) 0.43866 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -1.557733559176034e-20 <- latitude -> 8.98937864054348e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797193203591661e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744437e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 16 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 16 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 16 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313894 (min) 0.314057 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34082 (min) 0.439696 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123642e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313727 (min) 0.314071 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334553 (min) 0.42432 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241785e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313772 (min) 0.314149 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334484 (min) 0.424235 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739066e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313978 (min) 0.314158 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328474 (min) 0.405594 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 13 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -1.6555452720067012e-20 <- latitude -> 8.990739846888173e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796742358985987e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728366e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313712 (min) 0.314024 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328324 (min) 0.405477 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321495e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314106 (min) 0.313642 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322722 (min) 0.384211 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214958e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.313882 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322777 (min) 0.384147 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220312e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.313951 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318142 (min) 0.361638 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:13:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:51 DEBUG opendrift.models.basemodel:2054: -2.0293307414037855e-20 <- latitude -> 8.99141603752451e-06
20:13:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795956501301291e-05
20:13:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706938e-12 degrees.
20:13:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.314012 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318204 (min) 0.361672 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188161e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313859 (min) 0.314041 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315163 (min) 0.33775 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198884e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313817 (min) 0.313966 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315188 (min) 0.337823 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129203598e-12 degrees.
20:13:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.313882 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313753 (min) 0.314098 (max)
20:13:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 15 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -2.537469128520046e-20 <- latitude -> 8.991385078230309e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945258745850963e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182784e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313922 (min) 0.313987 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31399 (min) 0.314134 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166733e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314061 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315177 (min) 0.338614 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177402e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.31404 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315129 (min) 0.338676 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680136e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.314023 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318283 (min) 0.362419 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -3.0646991165209856e-20 <- latitude -> 8.99177347286046e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7932978614574173e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653315e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313962 (min) 0.313974 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317097 (min) 0.362087 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4056532916372e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.31408 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322866 (min) 0.384481 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653283e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.314044 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322832 (min) 0.384538 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647922e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313979 (min) 0.314148 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32808 (min) 0.405274 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 17 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -3.4887798222204826e-20 <- latitude -> 8.991977787745339e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79451732206488e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123178e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313946 (min) 0.314142 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328643 (min) 0.404618 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113056e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.313823 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334669 (min) 0.423133 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123776e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313978 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33465 (min) 0.422917 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050620446e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.31408 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340541 (min) 0.438533 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -3.656878068420502e-20 <- latitude -> 8.991858727369748e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795563105913098e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086276e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314136 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340902 (min) 0.438695 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075574e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31397 (min) 0.314072 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346243 (min) 0.452651 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588972e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.314118 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346181 (min) 0.452575 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086297e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313621 (min) 0.314087 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350408 (min) 0.461896 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 19 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -3.4488519881111933e-20 <- latitude -> 8.991307631920001e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964231213098393e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578273e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.313672 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350135 (min) 0.461093 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086337e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313981 (min) 0.3141 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353082 (min) 0.468007 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091707e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.314102 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353049 (min) 0.467309 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599748e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.314092 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35399 (min) 0.469226 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -2.817927692077097e-20 <- latitude -> 8.992116598366299e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970756766553057e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313933 (min) 0.31413 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353904 (min) 0.470126 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070223e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314139 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35281 (min) 0.467343 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583624e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.314123 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352663 (min) 0.467494 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086303e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.314126 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350263 (min) 0.46178 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02 - step 21 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -1.7907344083831073e-20 <- latitude -> 8.992599035946435e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975753939584947e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070207e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.314007 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350362 (min) 0.462601 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059482e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313841 (min) 0.313819 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34625 (min) 0.453375 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757291e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313783 (min) 0.313795 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346242 (min) 0.45333 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070198e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314102 (min) 0.314074 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340392 (min) 0.440498 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: -5.2920628211808486e-21 <- latitude -> 8.992866906528886e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798010888934399e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059495e-12 degrees.
20:13:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314106 (min) 0.313969 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340611 (min) 0.440579 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535344e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.31413 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334645 (min) 0.422137 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47736646604874e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314125 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33461 (min) 0.421641 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043379e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314013 (min) 0.314152 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328128 (min) 0.403428 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01 - step 23 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993016304552377e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798207470208039e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027308e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313921 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328562 (min) 0.406151 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016595e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313924 (min) 0.313969 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322711 (min) 0.384472 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452463e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313886 (min) 0.313993 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322729 (min) 0.38467 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802731e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.314044 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318124 (min) 0.361959 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:00.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:13:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:52 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993096936674913e-06
20:13:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982048075673977e-05
20:13:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513916e-12 degrees.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314114 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318223 (min) 0.362108 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513921e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.313979 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314756 (min) 0.338574 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011244e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.313964 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314701 (min) 0.338559 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.5034439840166e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313915 (min) 0.314078 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314071 (min) 0.314123 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:53 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:53 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:13:53 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:00.500000
20:13:53 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:13:53 DEBUG opendrift.config:168: Adding 50 config items from environment
20:13:53 DEBUG opendrift.config:168: Adding 5 config items from environment
20:13:53 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:13:53 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:13:53 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:13:53 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:13:53 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:13:53 DEBUG opendrift.config:178: Overwriting config item seed:z
20:13:53 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:13:53 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:13:53 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:13:53 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:13:53 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:13:53 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:13:53 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:13:53 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:13:53 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:13:53 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:13:53 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:13:53 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:12.500000 to 2000-01-01 00:00:00.500000)
20:13:53 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:13:53 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:13:53 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:13:53 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:13:53 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 INFO opendrift.models.basemodel:946: All points are in ocean
20:13:53 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:13:53 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:13:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:13:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:53 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:13:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:13:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.31407 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353802 (min) 0.466032 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599698e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.314156 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352791 (min) 0.46472 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314046 (min) 0.314139 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352781 (min) 0.464125 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314154 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350231 (min) 0.458417 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 2 of 24 - 5000 active elements (0 deactivated)
20:13:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:53 DEBUG opendrift.models.basemodel:2054: -7.010517860970282e-20 <- latitude -> 8.893770903203733e-06
20:13:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7905548485545717e-05
20:13:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102408e-12 degrees.
20:13:53 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:13:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:13:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:13:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313648 (min) 0.313987 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350189 (min) 0.459917 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615837e-12 degrees.
20:13:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314097 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346022 (min) 0.451162 (max)
20:13:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129243e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.314154 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346014 (min) 0.451154 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626568e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.313852 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340701 (min) 0.438411 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -6.523045507544231e-20 <- latitude -> 8.937356689288705e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7948625028840958e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564804e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 38 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 38 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 38 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.314098 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340386 (min) 0.438707 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690967e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313858 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334343 (min) 0.422351 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204382e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.313832 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334455 (min) 0.422349 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002707065e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328345 (min) 0.403777 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 4 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -6.356368075622895e-20 <- latitude -> 8.960836396908684e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796715516375469e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 37 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 37 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 37 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.313821 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328489 (min) 0.405585 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327636e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.313992 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322539 (min) 0.384763 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354609e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.313997 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322614 (min) 0.384735 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359819e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313801 (min) 0.313996 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317976 (min) 0.36202 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -5.868293150517086e-20 <- latitude -> 8.973562111498466e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974970070538286e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24049567784096e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 31 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 31 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 31 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.313998 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317939 (min) 0.359396 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.25353443682491e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.31377 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315013 (min) 0.337653 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851684e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.313719 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314993 (min) 0.337587 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846328e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313391 (min) 0.313989 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314124 (min) 0.314309 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 6 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -5.217509673192948e-20 <- latitude -> 8.980907371569508e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797789465520984e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2578806898195e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 23 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 23 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 23 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313514 (min) 0.312888 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314048 (min) 0.314628 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798076e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314136 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315205 (min) 0.338426 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316832e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.314134 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315181 (min) 0.337817 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814124e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312709 (min) 0.313037 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318241 (min) 0.361672 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -4.331616351214048e-20 <- latitude -> 8.985456613663936e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797835349869297e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290007e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 14 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 14 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 14 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.312855 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31827 (min) 0.360259 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771253e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313132 (min) 0.314127 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322967 (min) 0.38361 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787329e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313188 (min) 0.314123 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322882 (min) 0.382673 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787327e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.313571 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328481 (min) 0.403505 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 8 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -3.784965931443298e-20 <- latitude -> 8.98823055522374e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797741358688179e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263209e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 9 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 9 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 9 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313775 (min) 0.314005 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328404 (min) 0.406819 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755156e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313919 (min) 0.313944 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334396 (min) 0.410888 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263196e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313996 (min) 0.313926 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334701 (min) 0.408435 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760519e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.313962 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340797 (min) 0.42198 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -2.6941691574504164e-20 <- latitude -> 8.989335879749552e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975610438817543e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.316555105247104e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.313908 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340793 (min) 0.441167 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739084e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.31385 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346179 (min) 0.448795 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739086e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313968 (min) 0.313823 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346325 (min) 0.447752 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739083e-12 degrees.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.313923 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35015 (min) 0.456594 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 10 of 24 - 5000 active elements (0 deactivated)
20:13:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:54 DEBUG opendrift.models.basemodel:2054: -2.160031180607595e-20 <- latitude -> 8.989349960353754e-06
20:13:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973187743788678e-05
20:13:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728347e-12 degrees.
20:13:54 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:13:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:13:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313881 (min) 0.314137 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350433 (min) 0.458156 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243723002e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313961 (min) 0.31402 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353004 (min) 0.464722 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225682e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313908 (min) 0.314003 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352808 (min) 0.464328 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243723002e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313812 (min) 0.31401 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353802 (min) 0.466081 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -1.2210443477181573e-20 <- latitude -> 8.988656234130346e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970117379162257e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220298e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314146 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353604 (min) 0.467653 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209592e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31405 (min) 0.314144 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352536 (min) 0.46691 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214953e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.314147 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352671 (min) 0.466312 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712276e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.314062 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350213 (min) 0.460591 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 12 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -1.8640650423525705e-20 <- latitude -> 8.987425953005893e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796604418664574e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204253e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313657 (min) 0.313611 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349224 (min) 0.461698 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696183e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314049 (min) 0.313979 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346192 (min) 0.450196 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35132512920422e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.314029 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346197 (min) 0.449897 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3534982557009e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313982 (min) 0.313856 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340793 (min) 0.437189 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -1.3185629118783021e-20 <- latitude -> 8.989263157873866e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7960155824731903e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888187518e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 12 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 12 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 12 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.313638 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340832 (min) 0.439511 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690857e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.31411 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334363 (min) 0.42365 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188133e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.314038 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334295 (min) 0.423409 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193541e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314048 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328441 (min) 0.404886 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 14 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -1.509245355219594e-20 <- latitude -> 8.990142239103429e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950882198639105e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674748e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313882 (min) 0.314155 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328262 (min) 0.404216 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166731e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313986 (min) 0.314121 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322505 (min) 0.383808 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674772e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313954 (min) 0.314093 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322481 (min) 0.383663 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768013e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.314058 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317911 (min) 0.36128 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -1.9303268371672905e-20 <- latitude -> 8.9910976347559e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.793520920286335e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38609515316134e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313788 (min) 0.314122 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318207 (min) 0.361631 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39478765915064e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313956 (min) 0.314121 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314541 (min) 0.338306 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156002e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313925 (min) 0.314121 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314689 (min) 0.338251 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156005e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314009 (min) 0.313547 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314109 (min) 0.314294 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 16 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -2.4899967855650834e-20 <- latitude -> 8.99170010069005e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794103982335137e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139892e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.314077 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314011 (min) 0.31431 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41217267112919e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.313839 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315183 (min) 0.338252 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139915e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.313908 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315145 (min) 0.338563 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513992e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313962 (min) 0.314059 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318251 (min) 0.362329 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -3.029602782285014e-20 <- latitude -> 8.992068733420954e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950083047439195e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123797e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.313815 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318182 (min) 0.361481 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605054e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313868 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322594 (min) 0.384579 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.313765 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32282 (min) 0.384086 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313857 (min) 0.313978 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328601 (min) 0.404729 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 18 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -3.453654093734516e-20 <- latitude -> 8.992233136281718e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7958330166046785e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960508e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314119 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328383 (min) 0.405592 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858894e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314087 (min) 0.313834 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334824 (min) 0.424877 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605017e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.313952 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334896 (min) 0.424379 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102338e-12 degrees.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313947 (min) 0.314137 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340909 (min) 0.440285 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:13:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:55 DEBUG opendrift.models.basemodel:2054: -3.630453576065616e-20 <- latitude -> 8.992141318366336e-06
20:13:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7965110435840724e-05
20:13:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075559e-12 degrees.
20:13:55 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31397 (min) 0.314002 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340872 (min) 0.439969 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059493e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313516 (min) 0.314077 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346105 (min) 0.452929 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567534e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313727 (min) 0.314081 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346189 (min) 0.452328 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070211e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313667 (min) 0.314077 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35026 (min) 0.461627 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 20 of 24 - 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:56 DEBUG opendrift.models.basemodel:2054: -3.4286672774307964e-20 <- latitude -> 8.99195902440862e-06
20:13:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971089021272905e-05
20:13:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064873e-12 degrees.
20:13:56 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313986 (min) 0.313991 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350276 (min) 0.462675 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572932e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.314075 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353023 (min) 0.468695 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583658e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.314098 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353089 (min) 0.468737 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583658e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314111 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353939 (min) 0.470636 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:56 DEBUG opendrift.models.basemodel:2054: -2.802842312631323e-20 <- latitude -> 8.991616960630905e-06
20:13:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797534100439306e-05
20:13:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091675e-12 degrees.
20:13:56 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.313996 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353947 (min) 0.46981 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858902e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313943 (min) 0.313909 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35298 (min) 0.468635 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605104e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313969 (min) 0.314016 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35304 (min) 0.468725 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107786e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.313902 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35041 (min) 0.462974 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02 - step 22 of 24 - 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:56 DEBUG opendrift.models.basemodel:2054: -1.7801644476616094e-20 <- latitude -> 8.991320277800306e-06
20:13:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797845186907244e-05
20:13:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011312e-12 degrees.
20:13:56 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31392 (min) 0.314143 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35043 (min) 0.462536 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086245e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.313633 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346195 (min) 0.452843 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610355e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.31383 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34616 (min) 0.453092 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259964e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313853 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340742 (min) 0.440284 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:56 DEBUG opendrift.models.basemodel:2054: -5.241272250779366e-21 <- latitude -> 8.990422972640303e-06
20:13:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79813896793474e-05
20:13:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059454e-12 degrees.
20:13:56 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313858 (min) 0.313813 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340666 (min) 0.440454 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203802e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313559 (min) 0.313959 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334634 (min) 0.424838 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551417e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313737 (min) 0.31399 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334591 (min) 0.424789 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48171271904338e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31394 (min) 0.313966 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328451 (min) 0.406079 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01 - step 24 of 24 - 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:56 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.989973242050315e-06
20:13:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7983162458319787e-05
20:13:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529985e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.313945 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328599 (min) 0.405987 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016592e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314005 (min) 0.31407 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322822 (min) 0.384731 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021949e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313926 (min) 0.314029 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322818 (min) 0.384654 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519269e-12 degrees.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314058 (min) 0.31408 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317979 (min) 0.362093 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:56 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:13:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:56 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:13:56 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:01
20:13:56 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:13:56 DEBUG opendrift.config:168: Adding 50 config items from environment
20:13:56 DEBUG opendrift.config:168: Adding 5 config items from environment
20:13:56 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:13:56 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:13:56 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:13:56 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:13:56 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:13:56 DEBUG opendrift.config:178: Overwriting config item seed:z
20:13:56 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:13:56 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:13:56 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:13:56 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:13:56 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:13:56 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:13:56 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:13:56 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:13:56 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:13:56 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:13:56 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:13:56 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:13 to 2000-01-01 00:00:01)
20:13:56 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:13:56 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:13:56 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:13:56 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:13:56 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:13:57 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 INFO opendrift.models.basemodel:946: All points are in ocean
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:13:57 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 1 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350539 (min) 0.458791 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4360770625997e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.314154 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352941 (min) 0.464819 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314054 (min) 0.314136 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352861 (min) 0.464327 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062114e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314112 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353655 (min) 0.466034 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -7.024384439848083e-20 <- latitude -> 8.893837408030417e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.790566266762118e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313752 (min) 0.313781 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353841 (min) 0.467622 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615837e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314044 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352981 (min) 0.466299 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129247e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314078 (min) 0.313909 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353043 (min) 0.466452 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631927e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314081 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350254 (min) 0.460685 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 3 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -6.583541405930419e-20 <- latitude -> 8.938118285783227e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7949778123067655e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653404e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 40 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 40 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 40 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313824 (min) 0.313859 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350232 (min) 0.461064 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690975e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.31392 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346151 (min) 0.451824 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321511e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.313963 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346151 (min) 0.452303 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.313873 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340772 (min) 0.439461 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -6.576895793588315e-20 <- latitude -> 8.962271624296336e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968606134904846e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4958 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.294823840274137e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 42 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 42 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 42 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 42 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.313957 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340464 (min) 0.439562 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327594e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.313535 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334619 (min) 0.422866 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21876441286784e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.313601 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334617 (min) 0.422714 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862469e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314013 (min) 0.314023 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328391 (min) 0.404143 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 5 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -6.338426050038355e-20 <- latitude -> 8.974972238499134e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976177254946678e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332936e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 37 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 37 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 37 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313721 (min) 0.313398 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32831 (min) 0.405858 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306123e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.313659 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322786 (min) 0.383095 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338286e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.31365 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322789 (min) 0.382872 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433829e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313855 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318008 (min) 0.360609 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -5.855634920398437e-20 <- latitude -> 8.982316269924437e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978537354231078e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798082e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 27 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 27 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 27 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313885 (min) 0.314066 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318088 (min) 0.360337 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326859e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313283 (min) 0.314052 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3151 (min) 0.337989 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295357e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313389 (min) 0.314036 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315152 (min) 0.338007 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289996e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.314015 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31394 (min) 0.31441 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 7 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -5.3137693784813845e-20 <- latitude -> 8.985715973854863e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978091714200778e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.30351634626324e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.313844 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314148 (min) 0.313706 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739084e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31388 (min) 0.313819 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314965 (min) 0.337817 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257838e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.313795 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314967 (min) 0.337087 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252481e-12 degrees.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313999 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318284 (min) 0.360898 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:13:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:57 DEBUG opendrift.models.basemodel:2054: -4.4022586112448766e-20 <- latitude -> 8.988765957607126e-06
20:13:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975809597172383e-05
20:13:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733717e-12 degrees.
20:13:57 DEBUG opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
20:13:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 11 elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 11 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 11 elements
20:13:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313173 (min) 0.313821 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31831 (min) 0.361926 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214943e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313736 (min) 0.313726 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323004 (min) 0.385243 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33176699072834e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313669 (min) 0.313724 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322961 (min) 0.385725 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33394011722566e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313882 (min) 0.313809 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328477 (min) 0.40669 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 9 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -3.705021125372602e-20 <- latitude -> 8.990464724768093e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972218244669027e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749711641e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313893 (min) 0.31414 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328616 (min) 0.392064 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198864e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.313996 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334957 (min) 0.423236 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209581e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313972 (min) 0.314047 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334915 (min) 0.42413 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204224e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.314095 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340734 (min) 0.439962 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -2.609513242840576e-20 <- latitude -> 8.991247137383084e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967661305427112e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696199e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313984 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34078 (min) 0.435351 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182776e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314062 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346145 (min) 0.448672 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193488e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313988 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346255 (min) 0.447693 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696216e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.314113 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35037 (min) 0.456541 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 11 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -2.0724028995842454e-20 <- latitude -> 8.991432166785997e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796226321719206e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182789e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313453 (min) 0.313967 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350382 (min) 0.458818 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674759e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313807 (min) 0.314044 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353003 (min) 0.465781 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768012e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313802 (min) 0.314023 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353067 (min) 0.464859 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177441e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313818 (min) 0.314059 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353974 (min) 0.466635 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -1.890065795248134e-20 <- latitude -> 8.991238164223609e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955785153340655e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674774e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313955 (min) 0.314105 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353794 (min) 0.467659 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664017e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314025 (min) 0.314033 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352788 (min) 0.466395 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37957577366938e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.314034 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35288 (min) 0.465615 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313985 (min) 0.313989 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350373 (min) 0.459914 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 13 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -1.2883374731807192e-20 <- latitude -> 8.990778713427976e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794743348967578e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313983 (min) 0.313827 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350277 (min) 0.462047 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.31415 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34568 (min) 0.452627 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161364e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314142 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345662 (min) 0.452275 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965868e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313786 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340776 (min) 0.439476 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -1.1723564973338985e-20 <- latitude -> 8.990057936717922e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7936663647282537e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39261453265334e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 9 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 9 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 9 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313841 (min) 0.314078 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340628 (min) 0.440221 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139897e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.314141 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334408 (min) 0.423703 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647936e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.314112 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334355 (min) 0.423885 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145256e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.314128 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328497 (min) 0.40525 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 15 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -1.4129675748530762e-20 <- latitude -> 8.990658122574314e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7942535847423174e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163658e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314013 (min) 0.314114 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328555 (min) 0.405364 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134567e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.314058 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322773 (min) 0.384915 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513993e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.313933 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322791 (min) 0.384881 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40130703864261e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313811 (min) 0.31407 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318169 (min) 0.362203 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -1.8744638333965565e-20 <- latitude -> 8.991576200729859e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7948815005787384e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314082 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318206 (min) 0.360955 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556609769e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313809 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314914 (min) 0.337113 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.313702 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314841 (min) 0.337261 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621143e-12 degrees.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314102 (min) 0.314125 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313988 (min) 0.313858 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 17 of 24 - 5000 active elements (0 deactivated)
20:13:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:58 DEBUG opendrift.models.basemodel:2054: -2.4471746936791277e-20 <- latitude -> 8.992161575245006e-06
20:13:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955245002789625e-05
20:13:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4230383036158e-12 degrees.
20:13:58 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.314037 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313495 (min) 0.31383 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605028e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313824 (min) 0.31385 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31523 (min) 0.338705 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118504e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313881 (min) 0.313995 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315219 (min) 0.338507 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011307e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313894 (min) 0.314014 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31815 (min) 0.362251 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -3.000536938686068e-20 <- latitude -> 8.992543176108536e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7961457520604115e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599682e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.313836 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318169 (min) 0.361806 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4469426950863e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314026 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322912 (min) 0.385416 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588982e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.314014 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322939 (min) 0.385092 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097024e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.31385 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328592 (min) 0.406001 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 19 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -3.4472459416757333e-20 <- latitude -> 8.992788159797121e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796715989394273e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589004e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.313597 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328651 (min) 0.404773 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594386e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313841 (min) 0.314122 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33488 (min) 0.424536 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107793e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313856 (min) 0.314073 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334753 (min) 0.424679 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605004e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313965 (min) 0.314092 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340957 (min) 0.440553 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -3.614812399040709e-20 <- latitude -> 8.992934028762347e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79721669340564e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070177e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.314037 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340762 (min) 0.440646 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048751e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314041 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34605 (min) 0.453041 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054108e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314007 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346014 (min) 0.453676 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655679e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31396 (min) 0.314015 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350282 (min) 0.463055 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 21 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -3.4167387018902794e-20 <- latitude -> 8.992999722882199e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976208366976697e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546077e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.314147 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35034 (min) 0.462106 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.31407 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35285 (min) 0.468502 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47953959254609e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.314009 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352956 (min) 0.469037 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540734e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.313934 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353898 (min) 0.470949 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -2.7939375118975315e-20 <- latitude -> 8.992983940059061e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797864509938282e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043426e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313612 (min) 0.314115 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353985 (min) 0.469763 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305351e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314022 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352879 (min) 0.468166 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556848e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314029 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352984 (min) 0.468233 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059534e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.313875 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35042 (min) 0.462496 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02 - step 23 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -1.773929879775188e-20 <- latitude -> 8.99285688830906e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798099188880662e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075627e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314111 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350352 (min) 0.463153 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080975e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.314123 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346001 (min) 0.453698 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589016e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.314125 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345939 (min) 0.453594 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858902e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313775 (min) 0.313788 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340692 (min) 0.440751 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:13:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:13:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:13:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:13:59 DEBUG opendrift.models.basemodel:2054: -5.200821847537034e-21 <- latitude -> 8.992556441341166e-06
20:13:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798117985558651e-05
20:13:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:13:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102445e-12 degrees.
20:13:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:13:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:13:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:13:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313812 (min) 0.314107 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34088 (min) 0.438999 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:13:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:13:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:13:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588929e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.314118 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334711 (min) 0.424423 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107683e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314127 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33467 (min) 0.424477 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599645e-12 degrees.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.31388 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328023 (min) 0.405836 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:13:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:13:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:13:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:13:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:13:59 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:13:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:13:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:13:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:13:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:13:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:13:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:13:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:13:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:13:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:13:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:13:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:13:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:13:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:13:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:13:59 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:00 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:01.500000
20:14:00 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:00 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:00 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:00 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:00 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:00 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:00 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:00 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:00 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:00 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:00 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:00 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:00 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:00 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:00 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:00 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:00 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:00 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:00 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:00 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:00 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:13.500000 to 2000-01-01 00:00:01.500000)
20:14:00 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:00 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:00 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:00 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:00 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:00 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:00 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:00 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314122 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34098 (min) 0.437384 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.313976 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3462 (min) 0.450385 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621138e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.313993 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346233 (min) 0.449766 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113102e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314156 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350455 (min) 0.458735 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:00 DEBUG opendrift.models.basemodel:2054: -6.831427019265751e-20 <- latitude -> 8.892633178787778e-06
20:14:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7903405095231713e-05
20:14:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
20:14:00 DEBUG opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
20:14:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 33 elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 33 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 33 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313591 (min) 0.31406 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350364 (min) 0.460026 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113152e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.314138 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352825 (min) 0.466862 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631919e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314039 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352993 (min) 0.466229 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631924e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.313988 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353815 (min) 0.468015 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:00 DEBUG opendrift.models.basemodel:2054: -6.622929858017362e-20 <- latitude -> 8.93765246984492e-06
20:14:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7948828097746782e-05
20:14:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648041e-12 degrees.
20:14:00 DEBUG opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
20:14:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 41 elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 41 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 41 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313781 (min) 0.313906 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353567 (min) 0.468633 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36219076169097e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314061 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352968 (min) 0.466357 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34045949671714e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.314151 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353036 (min) 0.467291 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314067 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35036 (min) 0.461511 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:00 DEBUG opendrift.models.basemodel:2054: -6.704357885057662e-20 <- latitude -> 8.96241226061433e-06
20:14:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968669107390342e-05
20:14:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4954 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776816e-12 degrees.
20:14:00 DEBUG opendrift.readers.basereader.variables:829: Masking 46 elements outside coverage
20:14:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 46 elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 46 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 46 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.314096 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350039 (min) 0.461855 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327564e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.313955 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345861 (min) 0.451045 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370489e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.31393 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345787 (min) 0.450501 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867821e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313675 (min) 0.313945 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340599 (min) 0.437761 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:00 DEBUG opendrift.models.basemodel:2054: -6.595021646669363e-20 <- latitude -> 8.97563313547009e-06
20:14:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976557713713203e-05
20:14:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4956 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332957e-12 degrees.
20:14:00 DEBUG opendrift.readers.basereader.variables:829: Masking 44 elements outside coverage
20:14:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 44 elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 44 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 44 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.313941 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34018 (min) 0.440196 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295371e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314024 (min) 0.314093 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3345 (min) 0.421824 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433825e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.314102 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334496 (min) 0.421298 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830216e-12 degrees.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313943 (min) 0.312726 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32845 (min) 0.403037 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:00 DEBUG opendrift.models.basemodel:2054: -6.349420523993958e-20 <- latitude -> 8.983129320583688e-06
20:14:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978731708157368e-05
20:14:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787325e-12 degrees.
20:14:00 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:14:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:14:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328272 (min) 0.405936 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252475e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.31414 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322596 (min) 0.384211 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284629e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314142 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322539 (min) 0.384124 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.288304460781953e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313767 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31812 (min) 0.361555 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -5.875241056444626e-20 <- latitude -> 8.98691947743578e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977585019966133e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4976 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32090135824176e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 24 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 24 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 24 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 24 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313938 (min) 0.313635 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318145 (min) 0.361515 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220322e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.313708 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315157 (min) 0.337532 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241761e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313682 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315155 (min) 0.337629 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236402e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313109 (min) 0.313663 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314076 (min) 0.313667 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -5.3144860209419146e-20 <- latitude -> 8.988269659361473e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973880694305097e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712276e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 14 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 14 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 14 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313906 (min) 0.313991 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314069 (min) 0.313473 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696178e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313551 (min) 0.313873 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315044 (min) 0.338378 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35132512920422e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313353 (min) 0.313843 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314875 (min) 0.337757 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34697887620963e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312728 (min) 0.314022 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3182 (min) 0.361609 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -3.84100369383613e-20 <- latitude -> 8.990112689963853e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796796882019531e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685442e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 8 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 8 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 8 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313429 (min) 0.313907 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318219 (min) 0.362662 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172058e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313863 (min) 0.313793 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322905 (min) 0.376046 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680094e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313801 (min) 0.313747 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322997 (min) 0.375098 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118278e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313884 (min) 0.313712 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328561 (min) 0.395552 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -3.7196194361547864e-20 <- latitude -> 8.991344187494267e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796017973102224e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166715e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.313718 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328523 (min) 0.404084 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155964e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.313977 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334922 (min) 0.420997 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37957577366936e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.313955 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334781 (min) 0.419963 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166681e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313672 (min) 0.31394 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34065 (min) 0.43576 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -3.0349814035997126e-20 <- latitude -> 8.992107059682686e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795083709203814e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155976e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313979 (min) 0.313844 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340803 (min) 0.435488 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647948e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313977 (min) 0.313636 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346318 (min) 0.449502 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39478765915063e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.313758 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346256 (min) 0.448637 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564795e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.313959 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350229 (min) 0.457559 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -1.1094987065769298e-20 <- latitude -> 8.992548910439674e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7940012578158717e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145284e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.313944 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350454 (min) 0.458845 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139881e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314005 (min) 0.313455 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353009 (min) 0.466469 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145233e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314032 (min) 0.313522 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353091 (min) 0.46603 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642555e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.31347 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35398 (min) 0.467823 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -1.5345446662345985e-20 <- latitude -> 8.992764639683411e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794251709978496e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134522e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313884 (min) 0.314078 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353605 (min) 0.469032 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129174e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313931 (min) 0.314135 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352817 (min) 0.464834 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313892 (min) 0.314126 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352704 (min) 0.465245 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.313968 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350247 (min) 0.459549 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -1.0266275619936963e-20 <- latitude -> 8.992797469674309e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7946628085361628e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123825e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314101 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350249 (min) 0.461461 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621157e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314159 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345675 (min) 0.452556 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626515e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314106 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345864 (min) 0.452686 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123838e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.31408 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340762 (min) 0.439872 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -1.0043538106481955e-20 <- latitude -> 8.992635028619422e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7951062341069496e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123852e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31377 (min) 0.314056 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340654 (min) 0.438924 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118433e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31405 (min) 0.313649 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334612 (min) 0.423863 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.313822 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334556 (min) 0.424109 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314011 (min) 0.313867 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328224 (min) 0.405432 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -1.3161413498568767e-20 <- latitude -> 8.992677106597599e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955432796558896e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107723e-12 degrees.
20:14:01 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314087 (min) 0.313937 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328071 (min) 0.405594 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102372e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.313869 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322447 (min) 0.384557 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313976 (min) 0.313763 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322343 (min) 0.384558 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313994 (min) 0.314141 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317755 (min) 0.361896 (max)
20:14:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:01 DEBUG opendrift.models.basemodel:2054: -1.8140764113827577e-20 <- latitude -> 8.9928082358492e-06
20:14:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7959750312746086e-05
20:14:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102385e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314124 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317923 (min) 0.361813 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594367e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314085 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314889 (min) 0.338233 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599726e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314136 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314783 (min) 0.338164 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102405e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314148 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313513 (min) 0.314273 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -2.4019299513898317e-20 <- latitude -> 8.992969408104379e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963943170083488e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313818 (min) 0.313975 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313869 (min) 0.314021 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086266e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.313907 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314957 (min) 0.338391 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594309e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.313782 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314802 (min) 0.338324 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44259644209163e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.31385 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318129 (min) 0.361896 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -2.983199460998738e-20 <- latitude -> 8.993069789296638e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968993738557918e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572887e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.313813 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318035 (min) 0.362004 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567534e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31385 (min) 0.314115 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322877 (min) 0.385137 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075577e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31393 (min) 0.314094 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322943 (min) 0.385412 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075582e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314096 (min) 0.314152 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328505 (min) 0.406332 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -3.425218642611853e-20 <- latitude -> 8.993129921393753e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973369511823428e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567555e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313745 (min) 0.314154 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328573 (min) 0.404733 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075614e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.31403 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334831 (min) 0.424041 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086339e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.314002 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334708 (min) 0.42463 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086342e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31389 (min) 0.313675 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340956 (min) 0.440553 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -3.6125340384151213e-20 <- latitude -> 8.993162993245816e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976123816455165e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599115e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314055 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340784 (min) 0.440442 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599668e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313952 (min) 0.314139 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346229 (min) 0.453581 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615745e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313931 (min) 0.314106 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346259 (min) 0.45325 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107707e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313828 (min) 0.314158 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350269 (min) 0.4626 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -3.4168672780235727e-20 <- latitude -> 8.993178509154293e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979211138088182e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086284e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.313826 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35031 (min) 0.461135 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46650083356216e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314041 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352865 (min) 0.468885 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572877e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.314091 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35289 (min) 0.468437 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757288e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.314088 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353869 (min) 0.470348 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -2.784595464070134e-20 <- latitude -> 8.993183292368742e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980769613432015e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048751e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.314107 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353911 (min) 0.468582 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038038e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.314047 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353043 (min) 0.468675 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.314039 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353085 (min) 0.468648 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313989 (min) 0.314064 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350417 (min) 0.462899 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:02 DEBUG opendrift.models.basemodel:2054: -1.767392207761712e-20 <- latitude -> 8.993181592194625e-06
20:14:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982848869271968e-05
20:14:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032667e-12 degrees.
20:14:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313965 (min) 0.314075 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350387 (min) 0.462199 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519272e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314101 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346171 (min) 0.453217 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802731e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314015 (min) 0.31411 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346213 (min) 0.453 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802731e-12 degrees.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313687 (min) 0.313888 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340877 (min) 0.440156 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:02 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:02 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:02 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:02
20:14:02 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:02 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:02 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:02 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:02 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:02 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:03 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:03 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:03 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:03 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:03 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:03 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:03 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:03 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:03 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:03 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:03 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:03 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:03 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:03 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:03 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:14 to 2000-01-01 00:00:02)
20:14:03 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:03 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:03 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:03 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:03 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:03 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.314114 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328654 (min) 0.40386 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605054e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314082 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334975 (min) 0.422438 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313946 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334992 (min) 0.421896 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615131e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314146 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340956 (min) 0.437266 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -6.455484346831543e-20 <- latitude -> 8.890517161296324e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.789887575298926e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599724e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 31 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 31 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 31 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31407 (min) 0.313906 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341055 (min) 0.438578 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610467e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.313643 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346307 (min) 0.451892 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797625906e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.313874 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346097 (min) 0.451843 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129237e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314026 (min) 0.314124 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350346 (min) 0.460972 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -6.599883823453895e-20 <- latitude -> 8.935679497529558e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794572786364828e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513999e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 41 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 41 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 41 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313741 (min) 0.314159 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350453 (min) 0.462065 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674234e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.313896 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352951 (min) 0.467959 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701695e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.313836 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352715 (min) 0.467288 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701702e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.313799 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353663 (min) 0.469103 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -6.594867931211764e-20 <- latitude -> 8.961215201106219e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967350730258976e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 49 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 49 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 49 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313889 (min) 0.314142 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353929 (min) 0.47049 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835662e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.313423 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352251 (min) 0.468191 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.205725653884108e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.313561 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35252 (min) 0.467715 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.20789878038126e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.313393 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350144 (min) 0.461911 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -6.553510357674286e-20 <- latitude -> 8.975359065219279e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976228515256815e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4947 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2448419308356e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 53 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 53 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 53 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 53 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.313508 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350235 (min) 0.463065 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300727e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313981 (min) 0.312351 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346076 (min) 0.449997 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348965e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.312374 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346128 (min) 0.449174 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343643e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.313759 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340681 (min) 0.43661 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -6.393797807931531e-20 <- latitude -> 8.983185339807527e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978719961732826e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4953 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787329e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 47 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 47 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 47 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 47 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313537 (min) 0.31405 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.338053 (min) 0.44077 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3143819787498e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.3136 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334682 (min) 0.42365 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787316e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313511 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334697 (min) 0.423515 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284643e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313539 (min) 0.313578 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328394 (min) 0.40493 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -6.0914464885343e-20 <- latitude -> 8.987459718347066e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79773061950013e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4968 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739092e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 32 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 32 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 32 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 32 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.313822 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328479 (min) 0.404817 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712297e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313869 (min) 0.313612 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322682 (min) 0.383924 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236417e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313799 (min) 0.313606 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322642 (min) 0.383849 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231019e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313849 (min) 0.314146 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318143 (min) 0.361346 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:03 DEBUG opendrift.models.basemodel:2054: -5.830929040326326e-20 <- latitude -> 8.98961381269078e-06
20:14:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797248467793246e-05
20:14:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701527e-12 degrees.
20:14:03 DEBUG opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
20:14:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 17 elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 17 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 17 elements
20:14:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313899 (min) 0.313711 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318159 (min) 0.361558 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177438e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313804 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314766 (min) 0.337904 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35567138219888e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313991 (min) 0.313754 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314847 (min) 0.337845 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519352e-12 degrees.
20:14:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313742 (min) 0.313746 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313818 (min) 0.314181 (max)
20:14:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -5.0587482347105476e-20 <- latitude -> 8.990369964240636e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796416782921734e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669378e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31355 (min) 0.313863 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313868 (min) 0.313334 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.313964 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315194 (min) 0.339109 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669402e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.313942 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315191 (min) 0.339214 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664044e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.313824 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318103 (min) 0.363151 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -3.797631790680475e-20 <- latitude -> 8.990127997123546e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795230826523977e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150607e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314136 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318278 (min) 0.352834 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637225e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.314015 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323005 (min) 0.382966 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145263e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.314001 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322955 (min) 0.384038 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642585e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.313822 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328614 (min) 0.404762 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -3.2228740972252374e-20 <- latitude -> 8.989166986950778e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7940812815914592e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637241e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.314056 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328583 (min) 0.402122 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129153e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313543 (min) 0.313759 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33495 (min) 0.42041 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139871e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313725 (min) 0.313767 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334828 (min) 0.419778 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631833e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.313667 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340952 (min) 0.434889 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -1.661383081024554e-20 <- latitude -> 8.987701141579422e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7946561793229227e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314028 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340807 (min) 0.436692 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314089 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346128 (min) 0.450291 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621133e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314076 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346164 (min) 0.449384 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314012 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350357 (min) 0.458422 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -2.3609396685194502e-20 <- latitude -> 8.985837699743205e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950909508839802e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615784e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313983 (min) 0.314099 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350243 (min) 0.460528 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31361 (min) 0.313851 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352864 (min) 0.467095 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615793e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313634 (min) 0.31396 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352604 (min) 0.466423 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313696 (min) 0.313923 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353574 (min) 0.468239 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -9.612739188979683e-21 <- latitude -> 8.983541485790485e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7953919496336878e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011312e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.313996 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353735 (min) 0.46879 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615816e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.314097 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352819 (min) 0.468054 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118495e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314019 (min) 0.314074 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352761 (min) 0.467862 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118498e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.31406 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350279 (min) 0.462096 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -6.4503701467540864e-21 <- latitude -> 8.9861379979032e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795769816983927e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610384e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.31402 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350374 (min) 0.462571 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599672e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314124 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34614 (min) 0.4526 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599674e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31403 (min) 0.314105 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346187 (min) 0.452462 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102353e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.314027 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340766 (min) 0.439658 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -7.678869939835082e-21 <- latitude -> 8.988633850569123e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7960247092381238e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594323e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.313762 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340617 (min) 0.439506 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086289e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314147 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334497 (min) 0.424494 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588967e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.314076 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334575 (min) 0.424491 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588967e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313939 (min) 0.314064 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32854 (min) 0.405807 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -1.1747672950283935e-20 <- latitude -> 8.98914413299074e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964078629710205e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091659e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313867 (min) 0.314117 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328151 (min) 0.404101 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583628e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313935 (min) 0.314158 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322754 (min) 0.384713 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858899e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313956 (min) 0.31413 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322761 (min) 0.384663 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086313e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.314101 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318098 (min) 0.362027 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -1.7355375524191302e-20 <- latitude -> 8.987974184771548e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967182617282583e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589004e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.314123 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317942 (min) 0.362075 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091703e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.313765 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315063 (min) 0.338315 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097066e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313858 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315123 (min) 0.338252 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599745e-12 degrees.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.314103 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314103 (min) 0.314052 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:04 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:04 DEBUG opendrift.models.basemodel:2054: -2.3511422032608382e-20 <- latitude -> 8.98847651442897e-06
20:14:04 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970604753715373e-05
20:14:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096973e-12 degrees.
20:14:04 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313978 (min) 0.313848 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313915 (min) 0.314387 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572861e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314115 (min) 0.314129 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31518 (min) 0.338431 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075543e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.314128 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315179 (min) 0.337908 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075543e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314111 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318157 (min) 0.361751 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:05 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:05 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:05 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:05 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:05 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:05 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:05 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:05 DEBUG opendrift.models.basemodel:2054: -2.954268711290426e-20 <- latitude -> 8.989072253207698e-06
20:14:05 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974189988277014e-05
20:14:05 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:05 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655679e-12 degrees.
20:14:05 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:05 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:05 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313927 (min) 0.313893 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31818 (min) 0.362539 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:05 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:05 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048762e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.313947 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322618 (min) 0.384478 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054124e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.313788 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322708 (min) 0.385121 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054123e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313731 (min) 0.314108 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32833 (min) 0.406016 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:05 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:05 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:05 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:05 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:05 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:05 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:05 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:05 DEBUG opendrift.models.basemodel:2054: -3.395190530688963e-20 <- latitude -> 8.988769960244935e-06
20:14:05 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797628990500294e-05
20:14:05 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:05 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048773e-12 degrees.
20:14:05 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:05 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:05 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31387 (min) 0.3141 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328599 (min) 0.406355 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:05 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:05 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048788e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.31408 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334637 (min) 0.423042 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305415e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.314062 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33481 (min) 0.422066 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556834e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.313704 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34084 (min) 0.437931 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:05 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:05 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:05 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:05 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:05 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:05 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:05 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:05 DEBUG opendrift.models.basemodel:2054: -3.5900664013365586e-20 <- latitude -> 8.988660770672297e-06
20:14:05 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797955837192859e-05
20:14:05 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:05 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556845e-12 degrees.
20:14:05 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:05 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:05 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.313973 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340681 (min) 0.440616 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:05 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:05 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075629e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.313825 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346216 (min) 0.451801 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086352e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.313881 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34629 (min) 0.450899 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583676e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.314109 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350114 (min) 0.460116 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:05 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:05 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:05 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:05 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:05 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:05 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:05 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:05 DEBUG opendrift.models.basemodel:2054: -3.399782155366305e-20 <- latitude -> 8.990198453827543e-06
20:14:05 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798104962966255e-05
20:14:05 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:05 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107823e-12 degrees.
20:14:05 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:05 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:05 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314108 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350323 (min) 0.462865 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:05 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:05 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123863e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.314049 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352721 (min) 0.468965 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145306e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314114 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352929 (min) 0.468866 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564799e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314078 (min) 0.314113 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353831 (min) 0.470774 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:05 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:05 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:05 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:05 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:05 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:05 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:05 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:05 DEBUG opendrift.models.basemodel:2054: -2.771913643012353e-20 <- latitude -> 8.99081727302777e-06
20:14:05 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798132489067957e-05
20:14:05 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:05 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599655e-12 degrees.
20:14:05 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:05 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:05 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:05 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314147 (min) 0.314141 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353784 (min) 0.471025 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:05 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:05 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064833e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.31404 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353068 (min) 0.468678 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158359e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314125 (min) 0.314044 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353059 (min) 0.468619 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578231e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.313878 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350316 (min) 0.46287 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:05 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:05 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:05 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:05 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:05 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:02.500000
20:14:05 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:05 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:05 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:05 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:05 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:05 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:05 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:05 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:05 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:05 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:05 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:05 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:05 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:05 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:05 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:05 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:05 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:05 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:05 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:05 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:05 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:14.500000 to 2000-01-01 00:00:02.500000)
20:14:05 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:05 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:05 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:05 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:05 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:05 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:05 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:05 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:05 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:05 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:05 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:05 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:05 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:05 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:05 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:05 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314099 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31829 (min) 0.36145 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:05 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:05 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:05 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:05 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:05 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:05 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313951 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323034 (min) 0.383661 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615774e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.314107 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323001 (min) 0.383545 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:05 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:05 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:05 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:05 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118456e-12 degrees.
20:14:05 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:05 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:05 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:05 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:05 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31406 (min) 0.31407 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328653 (min) 0.40385 (max)
20:14:05 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -5.950333853432241e-20 <- latitude -> 8.888211500608617e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7892313437712404e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4972 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4339039361024e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 28 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 28 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 28 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 28 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.314159 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328723 (min) 0.404639 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605101e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.313841 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334879 (min) 0.423606 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314052 (min) 0.313809 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334959 (min) 0.423432 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123873e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.314159 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34102 (min) 0.439013 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -6.403602196218294e-20 <- latitude -> 8.93303092764824e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7940373520772507e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631938e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 40 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 40 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 40 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314106 (min) 0.314024 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340705 (min) 0.439906 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161462e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.314074 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345924 (min) 0.451597 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182917e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.313925 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346179 (min) 0.452613 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014684957e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.313752 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35017 (min) 0.461858 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -6.651459204955001e-20 <- latitude -> 8.959352126840193e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796447080992291e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4949 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32742073773389e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 51 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 51 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 51 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 51 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313924 (min) 0.313799 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350462 (min) 0.460393 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26222694281437e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314058 (min) 0.314024 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352939 (min) 0.467008 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338514e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314063 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352697 (min) 0.468132 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.23397629834924e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.314095 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353653 (min) 0.469974 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -6.530476593206816e-20 <- latitude -> 8.974171072635932e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797509650807006e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4940 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22311066586243e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 60 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 60 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 60 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 60 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313526 (min) 0.314085 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353801 (min) 0.467249 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.255707563322191e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.314106 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352969 (min) 0.465303 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873133e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.314123 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352865 (min) 0.464284 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365047e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313697 (min) 0.313928 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350264 (min) 0.458582 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -6.390090985525317e-20 <- latitude -> 8.982259576363e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978519287132588e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4938 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808776e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 62 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 62 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 62 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 62 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313432 (min) 0.313869 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350232 (min) 0.46031 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219765892e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.313943 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34581 (min) 0.452464 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808773e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.313922 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345711 (min) 0.452233 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300737e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313816 (min) 0.314083 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340752 (min) 0.43942 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -6.577019630977779e-20 <- latitude -> 8.986796442508485e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797747222870822e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252478e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 49 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 49 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 49 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.313545 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340274 (min) 0.438988 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209607e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.313459 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334103 (min) 0.422927 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231743803e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.313498 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33405 (min) 0.422774 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32307448473909e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.313539 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328421 (min) 0.404263 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -6.32483728471791e-20 <- latitude -> 8.98940124278995e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972305500774136e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701563e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 27 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 27 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 27 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314085 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32832 (min) 0.404359 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177433e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313897 (min) 0.313453 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322551 (min) 0.384189 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198874e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.313555 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322521 (min) 0.38408 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36219076169084e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.31412 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317978 (min) 0.361538 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -4.876776026183514e-20 <- latitude -> 8.990946791331386e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7962350936053328e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664015e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 13 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 13 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 13 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.31375 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318014 (min) 0.361476 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647964e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.31368 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315081 (min) 0.337333 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664041e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.31365 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31502 (min) 0.337538 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658684e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313965 (min) 0.313936 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314006 (min) 0.313621 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -5.2921817907247493e-20 <- latitude -> 8.991871536234233e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7946714563375122e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139887e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.313863 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314108 (min) 0.313335 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129187e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313886 (min) 0.313924 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314934 (min) 0.33289 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418133898e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313862 (min) 0.313956 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314954 (min) 0.332239 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637225e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314021 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318069 (min) 0.353553 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -3.853640823133196e-20 <- latitude -> 8.992399067472823e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945029365343763e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129206e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.313811 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318326 (min) 0.362684 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:06 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:06 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:06 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118433e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314023 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322774 (min) 0.38267 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41434579762647e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.314036 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322895 (min) 0.382213 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118432e-12 degrees.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.313905 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328441 (min) 0.402286 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:06 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:06 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:06 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:06 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:06 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:06 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:06 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:06 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:06 DEBUG opendrift.models.basemodel:2054: -2.238280162313518e-20 <- latitude -> 8.992656208457467e-06
20:14:06 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79515882647729e-05
20:14:06 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:06 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107723e-12 degrees.
20:14:06 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:06 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:06 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:06 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:06 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:06 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:06 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:06 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:06 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:06 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:06 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:06 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:06 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.314149 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328673 (min) 0.402674 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:06 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:06 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:06 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:06 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:06 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313897 (min) 0.314156 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334878 (min) 0.421617 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313834 (min) 0.314146 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334863 (min) 0.420916 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314058 (min) 0.314117 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340914 (min) 0.436226 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -3.0612898932437024e-20 <- latitude -> 8.992729323482257e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955699310664308e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097026e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.313821 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340916 (min) 0.437871 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594359e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314027 (min) 0.313998 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346215 (min) 0.451288 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599718e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.314018 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346168 (min) 0.451038 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259972e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.314016 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350483 (min) 0.460146 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -1.1266905437230794e-20 <- latitude -> 8.992681507905647e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7959742646780953e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599726e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313754 (min) 0.314104 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350414 (min) 0.46109 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102416e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313728 (min) 0.313954 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352829 (min) 0.467302 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107777e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313666 (min) 0.314094 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352988 (min) 0.467385 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605096e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313512 (min) 0.314056 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353885 (min) 0.469212 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -4.24238121655606e-21 <- latitude -> 8.992552639035606e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7961801824998304e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605014e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313968 (min) 0.313702 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3538 (min) 0.468825 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096981e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.31414 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35266 (min) 0.465784 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594304e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.314135 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352861 (min) 0.466802 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096982e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.313977 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350254 (min) 0.461075 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -3.0320202920161546e-21 <- latitude -> 8.992776216075061e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796502306591055e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091625e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314015 (min) 0.314081 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350302 (min) 0.460939 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45128894808091e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313744 (min) 0.313922 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345972 (min) 0.452515 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080912e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313691 (min) 0.313771 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345954 (min) 0.452552 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578233e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.314139 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340346 (min) 0.439751 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -5.680745845804971e-21 <- latitude -> 8.992940799135026e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796698567020425e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070197e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313841 (min) 0.314125 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340005 (min) 0.440074 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567525e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.313951 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334033 (min) 0.423987 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070207e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.313895 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.333913 (min) 0.423812 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070208e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313985 (min) 0.313867 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328141 (min) 0.405219 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -1.050177679909853e-20 <- latitude -> 8.99303505130865e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7969717331230863e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567533e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313931 (min) 0.31316 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328514 (min) 0.404393 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064211e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.313752 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322725 (min) 0.383936 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064865e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.313871 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322675 (min) 0.383886 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070223e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.313996 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31802 (min) 0.361374 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -1.6545326130624195e-20 <- latitude -> 8.99309214952068e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797234583510032e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.314132 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318181 (min) 0.362307 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075608e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314129 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315071 (min) 0.338291 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45346207457829e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.314146 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315082 (min) 0.338268 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578291e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.314057 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313736 (min) 0.314356 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -2.3100490426045024e-20 <- latitude -> 8.993128273573046e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974345738244787e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589022e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313697 (min) 0.314152 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314149 (min) 0.314151 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599765e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.314016 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31487 (min) 0.338243 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107814e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.313929 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315042 (min) 0.338144 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113173e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.313936 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317735 (min) 0.361632 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -2.9190446198188773e-20 <- latitude -> 8.993150658093169e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977572712888846e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134638e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313774 (min) 0.314086 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318088 (min) 0.361506 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134465e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313871 (min) 0.31401 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322852 (min) 0.38461 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139826e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313851 (min) 0.313863 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322813 (min) 0.385315 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642508e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.314086 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328637 (min) 0.406276 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:07 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:07 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:07 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:07 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:07 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:07 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:07 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:07 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:07 DEBUG opendrift.models.basemodel:2054: -3.384306793430571e-20 <- latitude -> 8.993161442694806e-06
20:14:07 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978070568611596e-05
20:14:07 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:07 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43825018909696e-12 degrees.
20:14:07 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:07 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:07 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:07 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313936 (min) 0.314012 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328507 (min) 0.405906 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:07 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:07 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:07 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:07 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:07 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:07 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46650083356213e-12 degrees.
20:14:07 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:07 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:07 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:07 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.314158 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334582 (min) 0.424711 (max)
20:14:07 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:07 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:07 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:07 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:07 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:07 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:07 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:07 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075532e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314123 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334803 (min) 0.424833 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567489e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.314135 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340603 (min) 0.44073 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:08 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:08 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:08 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:08 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:08 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:08 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:08 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:08 DEBUG opendrift.models.basemodel:2054: -3.5714071525425995e-20 <- latitude -> 8.993158326362556e-06
20:14:08 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981245626474817e-05
20:14:08 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:08 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546061e-12 degrees.
20:14:08 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:08 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:08 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:08 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:08 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313905 (min) 0.31415 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340526 (min) 0.440099 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:08 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:08 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:08 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:08 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:08 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021949e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.314051 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346203 (min) 0.453653 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032667e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313949 (min) 0.314098 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346271 (min) 0.453549 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529988e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.314032 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350303 (min) 0.462908 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:08 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:08 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:08 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:08 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:08 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:08 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:08 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:08 DEBUG opendrift.models.basemodel:2054: -3.385614230484711e-20 <- latitude -> 8.993132589266557e-06
20:14:08 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982879737819192e-05
20:14:08 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:08 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984015936e-12 degrees.
20:14:08 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:08 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:08 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:08 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:08 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.314125 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350283 (min) 0.462352 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:08 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:08 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:08 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:08 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:08 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011239e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313894 (min) 0.314075 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352971 (min) 0.468653 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.5034439840166e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313749 (min) 0.314043 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353028 (min) 0.468134 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513921e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313832 (min) 0.313982 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353841 (min) 0.470043 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:08 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:08 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:08 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:08 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:08 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:08 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:08 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:03
20:14:08 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:08 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:08 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:08 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:08 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:08 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:08 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:08 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:08 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:08 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:08 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:08 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:08 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:08 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:08 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:08 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:08 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:08 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:08 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:08 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:08 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:15 to 2000-01-01 00:00:03)
20:14:08 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:08 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:08 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:08 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:08 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:08 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:08 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:08 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:08 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:08 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:08 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:08 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:08 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:08 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:08 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314158 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314157 (min) 0.31427 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:08 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:08 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:08 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:08 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:08 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960505e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314137 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315138 (min) 0.338278 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615126e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314066 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31517 (min) 0.338138 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.31405 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318287 (min) 0.361393 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:08 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:08 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:08 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:08 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:08 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:08 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:08 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:08 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:08 DEBUG opendrift.models.basemodel:2054: -5.3904392621716194e-20 <- latitude -> 8.886706399352454e-06
20:14:08 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7884137397068614e-05
20:14:08 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:08 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4975 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610239e-12 degrees.
20:14:08 DEBUG opendrift.readers.basereader.variables:829: Masking 25 elements outside coverage
20:14:08 DEBUG opendrift.models.basemodel.environment:767: Data missing for 25 elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:08 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:08 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:08 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 25 elements
20:14:08 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 25 elements
20:14:08 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:08 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:08 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.314159 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318175 (min) 0.361844 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:08 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:08 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:08 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:08 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:08 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:08 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:08 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:08 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:08 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:08 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:08 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:08 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:08 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:08 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310777e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.314048 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322832 (min) 0.384365 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615819e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314146 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322918 (min) 0.384424 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118498e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.313856 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328694 (min) 0.404934 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -5.95295833036967e-20 <- latitude -> 8.930621622685898e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7932708283448507e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 38 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 38 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 38 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313969 (min) 0.314125 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328741 (min) 0.405627 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642682e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.314081 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334907 (min) 0.423459 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664128e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.313944 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335005 (min) 0.424147 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166812e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.314011 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340723 (min) 0.439885 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -6.38071397160101e-20 <- latitude -> 8.95700656830928e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7959711350807904e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4949 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701697e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 51 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 51 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 51 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 51 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313995 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341003 (min) 0.439568 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219766081e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.31411 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346318 (min) 0.453619 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787544e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313725 (min) 0.313983 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34633 (min) 0.45306 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295591e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.31356 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350383 (min) 0.462333 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -6.497730738581401e-20 <- latitude -> 8.972735980012758e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972864042685904e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4937 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878745e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 63 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 63 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 63 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 63 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.314058 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350375 (min) 0.460727 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22745691885706e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.311956 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353044 (min) 0.468884 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910661e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313837 (min) 0.311742 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35307 (min) 0.468398 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402582e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313948 (min) 0.311412 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353974 (min) 0.470232 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -6.432369494777881e-20 <- latitude -> 8.981893517144047e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977915451262438e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4930 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24049567784091e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 70 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 70 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 70 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 70 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314009 (min) 0.314081 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353827 (min) 0.464498 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289994e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313387 (min) 0.313672 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352785 (min) 0.46856 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840947e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313385 (min) 0.313494 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352836 (min) 0.468246 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327522e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313554 (min) 0.313554 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350171 (min) 0.46243 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -6.674302092720715e-20 <- latitude -> 8.986957682614185e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797793293752392e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4927 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771268e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 73 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 73 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 73 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 73 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.313481 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350225 (min) 0.461075 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225686e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.313517 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346152 (min) 0.451637 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219765883e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.31349 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346131 (min) 0.451357 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257208e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313815 (min) 0.313439 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340568 (min) 0.438615 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -6.416122146265701e-20 <- latitude -> 8.989672716529332e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973444877836788e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4946 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712252e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 54 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 54 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 54 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 54 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.313857 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340545 (min) 0.438854 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182763e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.314085 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334613 (min) 0.42274 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209612e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.314077 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33464 (min) 0.422805 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204201e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.313963 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328417 (min) 0.404278 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -5.2444617763333005e-20 <- latitude -> 8.990987683578054e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963380759647875e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172076e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 21 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 21 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 21 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31342 (min) 0.313958 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328358 (min) 0.40493 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912144603e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313856 (min) 0.31388 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322773 (min) 0.383357 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664014e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313704 (min) 0.313813 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322755 (min) 0.383328 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161333e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.313589 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317766 (min) 0.36083 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -4.850328857046745e-20 <- latitude -> 8.9913772881486e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794584669664577e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139921e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 8 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 8 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 8 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.313693 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317234 (min) 0.361755 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062112e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.313869 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314984 (min) 0.337448 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134515e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.313873 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314984 (min) 0.337646 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134515e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31394 (min) 0.314023 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313867 (min) 0.313267 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -5.267169138198054e-20 <- latitude -> 8.991068811849298e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945807353825882e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310774e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313697 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314044 (min) 0.313394 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:09 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:09 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:09 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:09 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605074e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314013 (min) 0.314135 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315078 (min) 0.338314 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314134 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315016 (min) 0.338128 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.313947 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318244 (min) 0.361487 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:09 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:09 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:09 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:09 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:09 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:09 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:09 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:09 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:09 DEBUG opendrift.models.basemodel:2054: -2.6136369802799346e-20 <- latitude -> 8.99020084486236e-06
20:14:09 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7953929259501378e-05
20:14:09 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:09 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113134e-12 degrees.
20:14:09 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:09 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:09 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:09 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:09 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:09 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:09 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:09 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:09 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:09 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:09 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:09 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:09 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314006 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318263 (min) 0.360997 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:09 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:09 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:09 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:09 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599668e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.314057 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322968 (min) 0.383166 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960502e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313994 (min) 0.314046 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322939 (min) 0.382911 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960502e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.314101 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328554 (min) 0.403139 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -3.643561167114814e-20 <- latitude -> 8.989673555088308e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7958847324942188e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091633e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313936 (min) 0.313825 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328402 (min) 0.403827 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.314141 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33478 (min) 0.422479 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508628e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.31414 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334622 (min) 0.422407 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313748 (min) 0.314121 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34094 (min) 0.437894 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -1.2814519655880018e-20 <- latitude -> 8.990941865836826e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796312781757677e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583607e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314145 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339401 (min) 0.438692 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578256e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.31397 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345333 (min) 0.4522 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578256e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.313949 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34563 (min) 0.451628 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080938e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.31401 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349976 (min) 0.460804 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -2.00447206483608e-21 <- latitude -> 8.991943929125258e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796514007944777e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572906e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313999 (min) 0.313859 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349836 (min) 0.461875 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075596e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313987 (min) 0.313969 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352405 (min) 0.46664 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578273e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313938 (min) 0.314007 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35256 (min) 0.465861 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578273e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31384 (min) 0.313923 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353244 (min) 0.467664 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992511842142995e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968115892271834e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578281e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313161 (min) 0.314098 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353957 (min) 0.468866 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583649e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314113 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353061 (min) 0.468056 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583647e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.314151 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35306 (min) 0.467582 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583649e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.314101 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350254 (min) 0.461824 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992826512247308e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7969915011220174e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589017e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313676 (min) 0.314001 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350279 (min) 0.462404 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559439e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313945 (min) 0.313902 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345781 (min) 0.453313 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097073e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31392 (min) 0.313842 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345815 (min) 0.453073 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594393e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.313245 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340633 (min) 0.440211 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -3.5388153367558194e-21 <- latitude -> 8.992997243373206e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797078792468351e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605124e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.314158 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340817 (min) 0.44001 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118538e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313969 (min) 0.314115 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334618 (min) 0.423315 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123902e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.314131 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334641 (min) 0.423211 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626583e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314137 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328375 (min) 0.404635 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -9.24158420204849e-21 <- latitude -> 8.993083894342125e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973845216317734e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107681e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.314054 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328127 (min) 0.405597 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086248e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313882 (min) 0.314097 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322431 (min) 0.383051 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091606e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313867 (min) 0.314113 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322477 (min) 0.382791 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091606e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.31402 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317756 (min) 0.360583 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -1.5862159916305818e-20 <- latitude -> 8.993116827471547e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797578222431339e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070173e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314074 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31816 (min) 0.361694 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054102e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314009 (min) 0.314136 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314946 (min) 0.33828 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556782e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313994 (min) 0.314095 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314962 (min) 0.338209 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556782e-12 degrees.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314151 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313136 (min) 0.31439 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:10 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:10 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:10 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:10 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:10 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:10 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:10 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:10 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:10 DEBUG opendrift.models.basemodel:2054: -2.26664016788814e-20 <- latitude -> 8.99311101756171e-06
20:14:10 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976038239713444e-05
20:14:10 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:10 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546067e-12 degrees.
20:14:10 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:10 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:10 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:10 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:10 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:10 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:10 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:10 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:10 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:10 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:10 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.31415 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313493 (min) 0.314399 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:10 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:10 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:10 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:10 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:10 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:10 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:10 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:10 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:10 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:10 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:10 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.31411 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31517 (min) 0.338893 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.314085 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315092 (min) 0.338672 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540713e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313539 (min) 0.314115 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317993 (min) 0.362558 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:11 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:11 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:11 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:11 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:11 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:11 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:11 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:11 DEBUG opendrift.models.basemodel:2054: -2.895476471947577e-20 <- latitude -> 8.993075150746559e-06
20:14:11 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79796323006998e-05
20:14:11 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:11 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535359e-12 degrees.
20:14:11 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:11 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:11 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314057 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318234 (min) 0.362354 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:11 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:11 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:11 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:11 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:11 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802733e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313978 (min) 0.313987 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322687 (min) 0.384553 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032691e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.313886 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322651 (min) 0.384248 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.31412 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328643 (min) 0.404873 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:11 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:11 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:11 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:11 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:11 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:11 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:11 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:11 DEBUG opendrift.models.basemodel:2054: -3.3584417252018513e-20 <- latitude -> 8.993016463404999e-06
20:14:11 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798131526419218e-05
20:14:11 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:11 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535378e-12 degrees.
20:14:11 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:11 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:11 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.313872 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328422 (min) 0.406275 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:11 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:11 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:11 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:11 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:11 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038068e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.314044 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334836 (min) 0.424633 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546114e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313876 (min) 0.314075 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334899 (min) 0.424127 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043435e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313902 (min) 0.313871 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339865 (min) 0.439933 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:11 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:11 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:11 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:11 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:11 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:11 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:11 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:11 DEBUG opendrift.models.basemodel:2054: -3.566133692735754e-20 <- latitude -> 8.992940311662152e-06
20:14:11 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79809097005119e-05
20:14:11 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:11 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054171e-12 degrees.
20:14:11 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:11 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:11 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.31415 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339991 (min) 0.439086 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:11 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:11 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:11 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:11 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:11 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054133e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.313884 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346252 (min) 0.453417 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064857e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.313922 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346112 (min) 0.453471 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064857e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313947 (min) 0.31405 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350357 (min) 0.462851 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:11 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:11 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:11 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:11 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:11 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:11 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:11 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:03.500000
20:14:11 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:11 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:11 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:11 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:11 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:11 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:11 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:11 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:11 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:11 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:11 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:11 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:11 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:11 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:11 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:11 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:11 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:11 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:11 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:11 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:11 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:15.500000 to 2000-01-01 00:00:03.500000)
20:14:11 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:11 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:11 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:11 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:11 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:11 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:11 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:11 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:11 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:11 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:11 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:11 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:11 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:11 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:11 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.314156 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317981 (min) 0.361961 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:11 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:11 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:11 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:11 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:11 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.314115 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315116 (min) 0.337868 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118448e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314044 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315104 (min) 0.337937 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050620482e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314158 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314153 (min) 0.3142 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:11 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:11 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:11 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:11 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:11 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:11 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:11 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:11 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:11 DEBUG opendrift.models.basemodel:2054: -4.618766844970814e-20 <- latitude -> 8.886642547643857e-06
20:14:11 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7874986027492632e-05
20:14:11 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:11 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102388e-12 degrees.
20:14:11 DEBUG opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
20:14:11 DEBUG opendrift.models.basemodel.environment:767: Data missing for 21 elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 21 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 21 elements
20:14:11 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:11 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314052 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313897 (min) 0.314403 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:11 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:11 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:11 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:11 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:11 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:11 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102405e-12 degrees.
20:14:11 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:11 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:11 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:11 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.313844 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315121 (min) 0.338519 (max)
20:14:11 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:11 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:11 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:11 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:11 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:11 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:11 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:11 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610444e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.314009 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314957 (min) 0.33844 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610449e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.313921 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318316 (min) 0.36187 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -5.3895612233271496e-20 <- latitude -> 8.929484336244802e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7922893803644486e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615832e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313929 (min) 0.314158 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318262 (min) 0.362124 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134615e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.313901 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322865 (min) 0.385076 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642668e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313984 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322672 (min) 0.384642 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648028e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314005 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328661 (min) 0.405284 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -5.955522275724823e-20 <- latitude -> 8.955106312483442e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795274873524454e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4950 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172187e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 50 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 50 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 50 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 50 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313842 (min) 0.314049 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328445 (min) 0.404961 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.313996 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334938 (min) 0.424831 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123657e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314049 (min) 0.314068 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334972 (min) 0.424247 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231743971e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.313656 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340973 (min) 0.440033 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -6.296125915201179e-20 <- latitude -> 8.970850141566913e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7969076504317052e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4936 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300322e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 64 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 64 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 64 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 64 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.313498 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34087 (min) 0.436328 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.197033147894621e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.313791 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34632 (min) 0.446107 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.162263123937754e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.313567 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346172 (min) 0.445643 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.157916870942493e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.313211 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350161 (min) 0.455113 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -6.473325370574387e-20 <- latitude -> 8.98054392755845e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976498642497422e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4925 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386514e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 75 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 75 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 75 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 75 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313939 (min) 0.313615 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350155 (min) 0.459399 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835586e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313782 (min) 0.314027 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353122 (min) 0.461298 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386483e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313735 (min) 0.313948 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353054 (min) 0.460839 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878449e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31373 (min) 0.313929 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353922 (min) 0.462968 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -5.833816570607565e-20 <- latitude -> 8.986204572405717e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978231062465974e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4920 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814166e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 80 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 80 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 80 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 80 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313646 (min) 0.313542 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353675 (min) 0.469343 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760491e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.313719 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352899 (min) 0.466449 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803369e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.313672 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352815 (min) 0.465852 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295373e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.313604 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350155 (min) 0.460099 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -6.424552397443655e-20 <- latitude -> 8.989339149037995e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975331071846292e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4919 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733706e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 81 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 81 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 81 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 81 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314065 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350003 (min) 0.460604 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198868e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313803 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346004 (min) 0.451301 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728345e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.313782 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346076 (min) 0.451229 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225671e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313554 (min) 0.314153 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340598 (min) 0.43849 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -6.420807899057574e-20 <- latitude -> 8.991033625413105e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7966795881703458e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4939 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267679456e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 61 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 61 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 61 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 61 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313808 (min) 0.313893 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340573 (min) 0.438409 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965864e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.313784 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334385 (min) 0.42326 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680078e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314032 (min) 0.313845 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334411 (min) 0.423257 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674722e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313892 (min) 0.313828 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32799 (min) 0.404687 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -5.109096345901577e-20 <- latitude -> 8.991881480361118e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795015217409933e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4985 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564795e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 15 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 15 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 15 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 15 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313684 (min) 0.313746 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328317 (min) 0.403323 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626473e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313886 (min) 0.314027 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322766 (min) 0.384415 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139873e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313701 (min) 0.314027 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322746 (min) 0.384346 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139873e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.313935 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318051 (min) 0.361727 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -4.718213563134169e-20 <- latitude -> 8.992182366159735e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7943457352583435e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113097e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314073 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318065 (min) 0.361795 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:12 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:12 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102398e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.313842 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315153 (min) 0.338078 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.313797 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315164 (min) 0.338048 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610437e-12 degrees.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313967 (min) 0.314068 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31408 (min) 0.314351 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:12 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:12 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:12 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:12 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:12 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:12 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:12 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:12 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:12 DEBUG opendrift.models.basemodel:2054: -4.4037809053341246e-20 <- latitude -> 8.992083112930041e-06
20:14:12 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7953963039154786e-05
20:14:12 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:12 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310778e-12 degrees.
20:14:12 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:12 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:12 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:12 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:12 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:12 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:12 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:12 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:12 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:12 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:12 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:12 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:12 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313941 (min) 0.314129 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314019 (min) 0.314196 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:12 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:12 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:12 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:12 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:12 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:12 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091627e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.314 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314457 (min) 0.338166 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.313977 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314731 (min) 0.337978 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313812 (min) 0.313992 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318256 (min) 0.361292 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: -3.330947969687013e-20 <- latitude -> 8.991669947334122e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7960632503318307e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086274e-12 degrees.
20:14:13 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:13 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313894 (min) 0.314127 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318233 (min) 0.361334 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45563520107557e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314103 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32287 (min) 0.384045 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080925e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314095 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322875 (min) 0.383678 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080928e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314004 (min) 0.313972 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328598 (min) 0.404112 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: -1.4218693573638543e-20 <- latitude -> 8.9918314395308e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964225705800522e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075577e-12 degrees.
20:14:13 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:13 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313898 (min) 0.313979 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328503 (min) 0.404493 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572905e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314063 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33483 (min) 0.42364 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075587e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.314056 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334901 (min) 0.423227 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075587e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.314145 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340865 (min) 0.438851 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992205475319733e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796816768830411e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31393 (min) 0.31405 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340828 (min) 0.438386 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45128894808096e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314123 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346139 (min) 0.451485 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080962e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.314118 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345997 (min) 0.450858 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080962e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313737 (min) 0.313886 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350428 (min) 0.460123 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992277878289033e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970102912989168e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583652e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.313681 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350464 (min) 0.462162 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589019e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314137 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353117 (min) 0.466455 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583663e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.314147 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353046 (min) 0.465481 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086342e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.31415 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353971 (min) 0.467324 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992157921859972e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970987727913686e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858903e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.314126 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353716 (min) 0.469961 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599765e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313728 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352872 (min) 0.467633 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605124e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31408 (min) 0.313729 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352934 (min) 0.467503 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107153e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.313852 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350388 (min) 0.461747 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99190072154126e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973500402870933e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615856e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.314109 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350287 (min) 0.462843 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626592e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314101 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345996 (min) 0.45302 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129276e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.31413 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346047 (min) 0.453185 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631951e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313879 (min) 0.313913 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340759 (min) 0.440331 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: -1.3607177504455831e-21 <- latitude -> 8.991504079891547e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79753025320873e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564805e-12 degrees.
20:14:13 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:13 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.314075 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340685 (min) 0.440723 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139826e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313836 (min) 0.314123 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334724 (min) 0.424776 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145183e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313811 (min) 0.314153 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334707 (min) 0.424723 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642505e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.313939 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328513 (min) 0.406002 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: -8.432218003148217e-21 <- latitude -> 8.991277642570188e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976335413702243e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118393e-12 degrees.
20:14:13 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:13 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.314158 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328518 (min) 0.405317 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259964e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.313925 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322745 (min) 0.383419 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610232e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.313957 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322739 (min) 0.383571 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610232e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31379 (min) 0.313832 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31806 (min) 0.360976 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: -1.5307816348562033e-20 <- latitude -> 8.991871291822434e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797634978100197e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075528e-12 degrees.
20:14:13 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:13 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313716 (min) 0.313975 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318082 (min) 0.362183 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059454e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313833 (min) 0.314117 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31503 (min) 0.338403 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562135e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313806 (min) 0.314077 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31504 (min) 0.338445 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562136e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313966 (min) 0.314129 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314154 (min) 0.314012 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:13 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:13 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:13 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:13 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:13 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:13 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:13 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:13 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:13 DEBUG opendrift.models.basemodel:2054: -2.2311706226888208e-20 <- latitude -> 8.992169023754414e-06
20:14:13 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979567936088825e-05
20:14:13 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:13 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546062e-12 degrees.
20:14:13 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:13 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:13 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:13 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313865 (min) 0.314073 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313734 (min) 0.31378 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:13 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:13 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:13 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:13 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:13 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:13 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038025e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313586 (min) 0.31382 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315121 (min) 0.3388 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038025e-12 degrees.
20:14:13 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:13 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:13 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:13 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31355 (min) 0.313786 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315059 (min) 0.338656 (max)
20:14:13 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:13 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:13 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:13 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:13 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:13 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043385e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314088 (min) 0.31361 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31813 (min) 0.362448 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:14 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:14 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:14 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:14 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:14 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:14 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:14 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:14 DEBUG opendrift.models.basemodel:2054: -2.8716450075153425e-20 <- latitude -> 8.992096779518266e-06
20:14:14 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981424993153967e-05
20:14:14 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:14 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529993e-12 degrees.
20:14:14 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:14 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:14 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313944 (min) 0.31407 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318137 (min) 0.362026 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:14 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:14 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:14 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:14 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:14 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519278e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.313906 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322761 (min) 0.384917 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524636e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314031 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322754 (min) 0.385134 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519278e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.314136 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328574 (min) 0.406099 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:14 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:14 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:14 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:14 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:14 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:14 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:14 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:14 DEBUG opendrift.models.basemodel:2054: -3.341599840234859e-20 <- latitude -> 8.991758417343597e-06
20:14:14 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981742431590716e-05
20:14:14 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:14 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016603e-12 degrees.
20:14:14 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:14 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:14 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.313787 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328522 (min) 0.406377 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:14 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:14 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:14 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:14 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:14 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519293e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.313557 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334707 (min) 0.424967 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452465e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.313866 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33469 (min) 0.424825 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452465e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.314055 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340677 (min) 0.440735 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:14 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:14 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:14 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:14 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:14 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:14 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:14 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:04
20:14:14 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:14 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:14 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:14 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:14 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:14 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:14 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:14 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:14 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:14 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:14 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:14 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:14 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:14 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:14 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:14 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:14 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:14 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:14 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:14 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:14 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:16 to 2000-01-01 00:00:04)
20:14:14 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:14 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:14 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:14 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:14 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:14 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:14 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:14 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:14 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:14 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:14 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:14 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:14 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:14 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:14 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.314123 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328313 (min) 0.40584 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:14 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:14 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:14 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:14 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:14 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.314157 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322618 (min) 0.384752 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118448e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.314132 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322622 (min) 0.384749 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615769e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314018 (min) 0.314144 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317981 (min) 0.361942 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:14 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:14 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:14 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:14 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:14 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:14 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:14 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:14 DEBUG opendrift.models.basemodel:2054: -3.790637540155806e-20 <- latitude -> 8.888031939261095e-06
20:14:14 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.786572345002992e-05
20:14:14 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:14 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605062e-12 degrees.
20:14:14 DEBUG opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
20:14:14 DEBUG opendrift.models.basemodel.environment:767: Data missing for 16 elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 16 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 16 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:14 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.314099 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317973 (min) 0.361956 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:14 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:14 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:14 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:14 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:14 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102395e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.314068 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314935 (min) 0.3377 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430112467e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313957 (min) 0.314139 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315002 (min) 0.337832 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314096 (min) 0.314158 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314007 (min) 0.314401 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:14 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:14 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:14 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:14 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:14 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:14 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:14 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:14 DEBUG opendrift.models.basemodel:2054: -4.6205993375153e-20 <- latitude -> 8.930206451818048e-06
20:14:14 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7911513185493255e-05
20:14:14 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:14 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4970 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310778e-12 degrees.
20:14:14 DEBUG opendrift.readers.basereader.variables:829: Masking 30 elements outside coverage
20:14:14 DEBUG opendrift.models.basemodel.environment:767: Data missing for 30 elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 30 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 30 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:14 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.313911 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314085 (min) 0.314589 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:14 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:14 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:14 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:14 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:14 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123878e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313996 (min) 0.313751 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315049 (min) 0.338509 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631922e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.313976 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314997 (min) 0.33882 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631927e-12 degrees.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.31393 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318138 (min) 0.362398 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:14 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:14 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:14 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:14 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:14 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:14 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:14 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:14 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:14 DEBUG opendrift.models.basemodel:2054: -5.363989280371874e-20 <- latitude -> 8.954836132418883e-06
20:14:14 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7943500035237694e-05
20:14:14 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:14 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4953 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145353e-12 degrees.
20:14:14 DEBUG opendrift.readers.basereader.variables:829: Masking 47 elements outside coverage
20:14:14 DEBUG opendrift.models.basemodel.environment:767: Data missing for 47 elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:14 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:14 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:14 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:14 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:14 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:14 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:14 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:14 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 47 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 47 elements
20:14:14 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:14 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:14 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314108 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318216 (min) 0.362752 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:14 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:14 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:14 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:14 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:14 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37522952067487e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.314115 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322824 (min) 0.385356 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690964e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314159 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322904 (min) 0.385452 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696325e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313995 (min) 0.314017 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328709 (min) 0.406219 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -5.942033051599942e-20 <- latitude -> 8.969803550709557e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963263893756223e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4937 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123593e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 63 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 63 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 63 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 63 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313757 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328637 (min) 0.403986 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195809e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313682 (min) 0.313951 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334926 (min) 0.422298 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835187e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313834 (min) 0.314057 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335006 (min) 0.423924 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332516e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313914 (min) 0.313792 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341002 (min) 0.439771 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -6.308919330291943e-20 <- latitude -> 8.979340243679973e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973732347883656e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4925 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.166609376932393e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 75 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 75 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 75 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 75 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313349 (min) 0.313449 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34103 (min) 0.434206 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.201379400889177e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.312592 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346314 (min) 0.448846 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.157916870942801e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.312534 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346264 (min) 0.447304 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.160089997440129e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313773 (min) 0.312949 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350315 (min) 0.456471 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -5.68610861685299e-20 <- latitude -> 8.98495824596177e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977787878801572e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4918 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862352e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 82 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 82 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 82 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 82 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313325 (min) 0.314107 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350329 (min) 0.455343 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26874632230608e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.31358 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352824 (min) 0.467031 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354315e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313498 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352935 (min) 0.466407 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343572e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.313483 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353669 (min) 0.468179 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -6.288788147111508e-20 <- latitude -> 8.98852599176099e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79770566480565e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771235e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 87 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 87 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 87 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313868 (min) 0.313979 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353993 (min) 0.467602 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225687e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313908 (min) 0.31412 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352955 (min) 0.46572 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268566e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313866 (min) 0.314118 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352897 (min) 0.46541 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.30786259925717e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313785 (min) 0.314033 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350085 (min) 0.459669 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -5.807032067419164e-20 <- latitude -> 8.990319792927784e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971134283761344e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4912 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209566e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 88 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 88 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 88 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 88 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.31397 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350314 (min) 0.460059 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172038e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313735 (min) 0.313965 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345993 (min) 0.451278 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701513e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313915 (min) 0.313939 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345999 (min) 0.450719 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696155e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313974 (min) 0.31387 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340631 (min) 0.437999 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -5.587893692991793e-20 <- latitude -> 8.990892449319203e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7957698757410916e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4930 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 70 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 70 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 70 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 70 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.314086 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340705 (min) 0.438717 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129161e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.313982 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334205 (min) 0.422561 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653276e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.313985 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334144 (min) 0.422281 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564792e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313448 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328494 (min) 0.40382 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -4.704305703455328e-20 <- latitude -> 8.990430666842326e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.793718765085759e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621146e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 9 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 9 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 9 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.314048 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328452 (min) 0.405014 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615738e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313954 (min) 0.3138 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322757 (min) 0.384536 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631892e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313918 (min) 0.313757 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322777 (min) 0.384479 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129216e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313989 (min) 0.313907 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317986 (min) 0.36183 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -5.873164742954144e-20 <- latitude -> 8.98929810974547e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795113231217436e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259967e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.314101 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318013 (min) 0.361608 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086284e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313968 (min) 0.31384 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31504 (min) 0.337311 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594325e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.313817 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315055 (min) 0.337545 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091646e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.313853 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31414 (min) 0.314152 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -3.135617157905855e-20 <- latitude -> 8.990528374947245e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7959889716437188e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080944e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313686 (min) 0.314144 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313874 (min) 0.314088 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583634e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314014 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315154 (min) 0.338395 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588993e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.313995 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315199 (min) 0.338112 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821582986e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.314078 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318108 (min) 0.361582 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:15 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:15 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:15 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:15 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:15 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:15 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:15 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:15 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:15 DEBUG opendrift.models.basemodel:2054: -8.795204309873277e-21 <- latitude -> 8.990982943192235e-06
20:14:15 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796581366160683e-05
20:14:15 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:15 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086327e-12 degrees.
20:14:15 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:15 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:15 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:15 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.314037 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317809 (min) 0.36209 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:15 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:15 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:15 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:15 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:15 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:15 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559439e-12 degrees.
20:14:15 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:15 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:15 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:15 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313716 (min) 0.314047 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322583 (min) 0.384031 (max)
20:14:15 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:15 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:15 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:15 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:15 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:15 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:15 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:15 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599747e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313694 (min) 0.314035 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322728 (min) 0.384276 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097068e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313963 (min) 0.314043 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328741 (min) 0.404891 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991871458292103e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968513936342005e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107806e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313884 (min) 0.314085 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328563 (min) 0.405429 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621076e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313917 (min) 0.314152 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334867 (min) 0.42402 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129264e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313971 (min) 0.314151 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334949 (min) 0.424135 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626584e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.314105 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340894 (min) 0.439873 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992421978586237e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971809217113726e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310768e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313924 (min) 0.314136 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341011 (min) 0.439688 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091607e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313836 (min) 0.3141 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346301 (min) 0.452112 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599643e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313846 (min) 0.314112 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346266 (min) 0.452366 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096965e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313991 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350391 (min) 0.461587 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992741984006723e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797380368399904e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313774 (min) 0.313598 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350485 (min) 0.461623 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572856e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314149 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352948 (min) 0.468183 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070174e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314155 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352863 (min) 0.468496 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572853e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314134 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353716 (min) 0.470352 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992901497732282e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974770137163536e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005946e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314011 (min) 0.314149 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35396 (min) 0.469971 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655678e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314141 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353055 (min) 0.467039 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054102e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314128 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353003 (min) 0.466378 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655678e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313963 (min) 0.313983 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350296 (min) 0.46065 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992934520448635e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974994628885307e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551425e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31407 (min) 0.314101 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349881 (min) 0.462095 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043387e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.313763 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346185 (min) 0.452971 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043389e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313823 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34619 (min) 0.453233 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546067e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313954 (min) 0.314076 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340722 (min) 0.440371 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992837079840129e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797681075925238e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038028e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.314159 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340589 (min) 0.440714 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535354e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.313661 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334695 (min) 0.424223 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535356e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.313857 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334731 (min) 0.424431 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038034e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.31402 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328193 (min) 0.405719 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: -7.936968179516959e-21 <- latitude -> 8.99257435056318e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978831388985234e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032682e-12 degrees.
20:14:16 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:16 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313763 (min) 0.314008 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328554 (min) 0.40539 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032683e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.313847 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322684 (min) 0.38487 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098534708e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313989 (min) 0.313877 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322665 (min) 0.384871 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535365e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31385 (min) 0.313969 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318057 (min) 0.36218 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: -1.472476286192033e-20 <- latitude -> 8.992095510754182e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980206556362828e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530013e-12 degrees.
20:14:16 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:16 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.314015 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317983 (min) 0.362317 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530018e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.313459 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315047 (min) 0.338348 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032698e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314054 (min) 0.313807 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315118 (min) 0.338407 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535377e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313639 (min) 0.313984 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314099 (min) 0.313888 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: -2.1995582252838882e-20 <- latitude -> 8.99134810665917e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980641243484284e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038067e-12 degrees.
20:14:16 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:16 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.314017 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313872 (min) 0.31421 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:16 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:16 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:16 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043435e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.314005 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315211 (min) 0.338723 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546122e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313939 (min) 0.314075 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315228 (min) 0.338825 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043442e-12 degrees.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.314009 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31808 (min) 0.362702 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:16 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:16 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:16 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:16 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:16 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:16 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:16 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:16 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:16 DEBUG opendrift.models.basemodel:2054: -2.8439315651400846e-20 <- latitude -> 8.990304476078551e-06
20:14:16 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797961477574813e-05
20:14:16 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:16 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054144e-12 degrees.
20:14:16 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:16 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:16 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:16 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:16 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:16 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:16 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:16 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:16 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:16 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:16 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:16 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:16 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313976 (min) 0.313936 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318229 (min) 0.361507 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:16 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:16 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:16 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:16 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:16 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:17 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059517e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.314123 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322904 (min) 0.384287 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059469e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.31412 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32286 (min) 0.384138 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059469e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313953 (min) 0.314146 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328621 (min) 0.404733 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:17 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:17 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:17 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:17 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:17 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:04.500000
20:14:17 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:17 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:17 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:17 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:17 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:17 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:17 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:17 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:17 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:17 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:17 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:17 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:17 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:17 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:17 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:17 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:17 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:17 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:17 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:17 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:17 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:16.500000 to 2000-01-01 00:00:04.500000)
20:14:17 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:17 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:17 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:17 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:17 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:17 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:17 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:17 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:17 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:17 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:17 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:17 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:17 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:17 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:17 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314158 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340662 (min) 0.440752 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:17 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:17 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:17 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113087e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.314159 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334635 (min) 0.424594 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615766e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.314144 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334619 (min) 0.42456 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118446e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314092 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328294 (min) 0.405749 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:17 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:17 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:17 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:17 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:17 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:17 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:17 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:17 DEBUG opendrift.models.basemodel:2054: -3.017070755167498e-20 <- latitude -> 8.890266268973975e-06
20:14:17 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7857382051185547e-05
20:14:17 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:17 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107736e-12 degrees.
20:14:17 DEBUG opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
20:14:17 DEBUG opendrift.models.basemodel.environment:767: Data missing for 13 elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 13 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 13 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:17 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314145 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32836 (min) 0.405821 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:17 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:17 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:17 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102388e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313768 (min) 0.314057 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322735 (min) 0.384403 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610431e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313897 (min) 0.314126 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322724 (min) 0.384492 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113108e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.314153 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318002 (min) 0.3617 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:17 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:17 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:17 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:17 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:17 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:17 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:17 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:17 DEBUG opendrift.models.basemodel:2054: -3.8742427087214195e-20 <- latitude -> 8.93251245783293e-06
20:14:17 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.789971669962462e-05
20:14:17 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:17 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
20:14:17 DEBUG opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
20:14:17 DEBUG opendrift.models.basemodel.environment:767: Data missing for 26 elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 26 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 26 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:17 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31384 (min) 0.3141 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317759 (min) 0.361893 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:17 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:17 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:17 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011314e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314088 (min) 0.314135 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31515 (min) 0.337852 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615829e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.314077 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31513 (min) 0.337928 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.314142 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314079 (min) 0.314596 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:17 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:17 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:17 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:17 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:17 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:17 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:17 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:17 DEBUG opendrift.models.basemodel:2054: -4.654872840818302e-20 <- latitude -> 8.956179033407645e-06
20:14:17 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.793245876114482e-05
20:14:17 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:17 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4958 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41434579762657e-12 degrees.
20:14:17 DEBUG opendrift.readers.basereader.variables:829: Masking 42 elements outside coverage
20:14:17 DEBUG opendrift.models.basemodel.environment:767: Data missing for 42 elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 42 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 42 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:17 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314142 (min) 0.31453 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:17 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:17 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:17 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648037e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.314008 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315248 (min) 0.338861 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658761e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.313882 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315229 (min) 0.338429 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161445e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313941 (min) 0.313808 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31821 (min) 0.36205 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:17 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:17 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:17 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:17 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:17 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:17 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:17 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:17 DEBUG opendrift.models.basemodel:2054: -5.3748843000353443e-20 <- latitude -> 8.970316916414487e-06
20:14:17 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955235763575736e-05
20:14:17 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:17 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4941 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36219076169096e-12 degrees.
20:14:17 DEBUG opendrift.readers.basereader.variables:829: Masking 59 elements outside coverage
20:14:17 DEBUG opendrift.models.basemodel.environment:767: Data missing for 59 elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 59 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 59 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:17 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313602 (min) 0.314158 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31811 (min) 0.362865 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:17 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:17 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:17 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:17 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:17 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32742073773389e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313846 (min) 0.312852 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322945 (min) 0.383226 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755349e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313837 (min) 0.312626 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323033 (min) 0.384089 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760714e-12 degrees.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31386 (min) 0.313959 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328801 (min) 0.40488 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:17 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:17 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:17 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:17 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:17 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:17 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:17 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:17 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:17 DEBUG opendrift.models.basemodel:2054: -5.937362750906626e-20 <- latitude -> 8.9790110496258e-06
20:14:17 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796910728256902e-05
20:14:17 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:17 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4927 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316417e-12 degrees.
20:14:17 DEBUG opendrift.readers.basereader.variables:829: Masking 73 elements outside coverage
20:14:17 DEBUG opendrift.models.basemodel.environment:767: Data missing for 73 elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:17 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:17 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:17 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:17 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:17 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:17 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:17 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:17 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 73 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 73 elements
20:14:17 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:17 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:17 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312705 (min) 0.312262 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328669 (min) 0.404769 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:17 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:17 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:17 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:17 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:17 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.179648135915665e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313919 (min) 0.31385 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334815 (min) 0.415762 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.155743744445173e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313908 (min) 0.313657 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334922 (min) 0.419441 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.15139749145117e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.313161 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341021 (min) 0.435306 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -6.369718601871578e-20 <- latitude -> 8.98466463106953e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976040062125155e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4917 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.164436250434746e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 83 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 83 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 83 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 83 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313157 (min) 0.313698 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340874 (min) 0.436263 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370406e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313988 (min) 0.314064 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34624 (min) 0.442671 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418614e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314019 (min) 0.313992 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346271 (min) 0.445761 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.18399438891061e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.313919 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35052 (min) 0.455247 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -5.635691955566939e-20 <- latitude -> 8.987481789761507e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977812282783544e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4912 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332894e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 88 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 88 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 88 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 88 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313953 (min) 0.313698 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350276 (min) 0.460639 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29482384027389e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31379 (min) 0.313975 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352712 (min) 0.465263 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316769e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313914 (min) 0.314019 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352707 (min) 0.464401 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808736e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313872 (min) 0.314059 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353447 (min) 0.466117 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -5.720095505955008e-20 <- latitude -> 8.988825270999073e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797486531352469e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744427e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 91 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 91 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 91 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313764 (min) 0.314136 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353169 (min) 0.467211 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3534982557009e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.314159 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352326 (min) 0.466159 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231029e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31398 (min) 0.314157 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352448 (min) 0.46553 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728353e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.314154 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350168 (min) 0.45979 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -5.697238965994496e-20 <- latitude -> 8.988774191072987e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7965628770671158e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680099e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 92 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 92 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 92 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314088 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350283 (min) 0.460881 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145238e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.313538 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346102 (min) 0.451423 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674717e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.313545 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346063 (min) 0.45091 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166676e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.313918 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340611 (min) 0.438169 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -5.519720332701901e-20 <- latitude -> 8.98806884268995e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794637892600667e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4922 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631867e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 78 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 78 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 78 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 78 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.313879 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34076 (min) 0.439361 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615745e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314035 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334205 (min) 0.42169 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637178e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314054 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334199 (min) 0.422071 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631822e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314024 (min) 0.313912 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328492 (min) 0.40357 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -4.924765215597014e-20 <- latitude -> 8.987831603258778e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945409829803227e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599684e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313876 (min) 0.314031 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328386 (min) 0.404125 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588982e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313997 (min) 0.313881 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322623 (min) 0.382747 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599705e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313927 (min) 0.313859 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322556 (min) 0.382865 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096373e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.31407 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317912 (min) 0.360367 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -2.815168979420419e-20 <- latitude -> 8.990068915888733e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795709755179698e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091682e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313807 (min) 0.314093 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318109 (min) 0.361373 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097066e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314027 (min) 0.313849 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31498 (min) 0.337977 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605103e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.313841 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315032 (min) 0.337901 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605104e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313987 (min) 0.313996 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314157 (min) 0.314313 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: -4.42283995587016e-21 <- latitude -> 8.991291110529523e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964863380806264e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605002e-12 degrees.
20:14:18 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:18 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314009 (min) 0.314031 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314105 (min) 0.314437 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.313698 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315117 (min) 0.338725 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858893e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.313677 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315015 (min) 0.338711 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086251e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313988 (min) 0.314009 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318218 (min) 0.362338 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991836580982862e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7969901496170523e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46432770706482e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314019 (min) 0.314129 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318086 (min) 0.362295 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:18 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:18 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:18 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556784e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.314085 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322863 (min) 0.384387 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.314092 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322753 (min) 0.384373 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054107e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314073 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328633 (min) 0.404943 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:18 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:18 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:18 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:18 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:18 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:18 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:18 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:18 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:18 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991912685836762e-06
20:14:18 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972667831569576e-05
20:14:18 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:18 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048752e-12 degrees.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:18 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:18 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:18 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:18 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:18 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:18 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:18 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:18 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:18 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:18 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:18 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314009 (min) 0.313888 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328637 (min) 0.405875 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:18 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:18 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:18 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:18 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:18 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043397e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314019 (min) 0.314102 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334835 (min) 0.42254 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043398e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.314112 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334845 (min) 0.423613 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043397e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.313728 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3409 (min) 0.439422 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991668910987048e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973371391195767e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.31409 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340971 (min) 0.440677 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038049e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313941 (min) 0.314076 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346225 (min) 0.45259 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540726e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313869 (min) 0.314131 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346002 (min) 0.451721 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540728e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31371 (min) 0.31412 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350304 (min) 0.461016 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991209123025531e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797594410195843e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540732e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.31412 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350289 (min) 0.461926 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540734e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314037 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353019 (min) 0.466458 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540736e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.31401 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352949 (min) 0.466583 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540736e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.314017 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353914 (min) 0.468492 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991313905665652e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977611370435157e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043416e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.31405 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353948 (min) 0.469567 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043426e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.314098 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352885 (min) 0.467607 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043429e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.314087 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352995 (min) 0.46731 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043427e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.313928 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350361 (min) 0.461579 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992151905813989e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797871066860484e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048793e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.31415 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350372 (min) 0.461855 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551478e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.313983 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346057 (min) 0.452109 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47519333955148e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.313988 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345946 (min) 0.451658 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305416e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314016 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340607 (min) 0.438913 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992620139865322e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797935191183965e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059527e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314047 (min) 0.313936 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340745 (min) 0.439259 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064896e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313428 (min) 0.313932 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334768 (min) 0.424246 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4643277070649e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313503 (min) 0.314108 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334762 (min) 0.424333 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4643277070649e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313949 (min) 0.313882 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328458 (min) 0.405657 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: -7.334812808974958e-21 <- latitude -> 8.9928671988996e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979425065426323e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075595e-12 degrees.
20:14:19 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:19 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:19 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314054 (min) 0.314102 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328178 (min) 0.405615 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578281e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.314125 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322702 (min) 0.384944 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578228e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31405 (min) 0.31409 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322642 (min) 0.384954 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578228e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.313926 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318006 (min) 0.362207 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: -1.4533588114819324e-20 <- latitude -> 8.992977461818767e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797857560590776e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567513e-12 degrees.
20:14:19 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:19 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:19 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:19 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:19 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.313965 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318093 (min) 0.362255 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:19 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:19 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:19 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:19 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:19 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:19 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562167e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313966 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315022 (min) 0.337918 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064847e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314023 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315036 (min) 0.337805 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567525e-12 degrees.
20:14:19 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:19 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:19 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:19 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314148 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313995 (min) 0.313951 (max)
20:14:19 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:19 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:19 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:19 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:19 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:19 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:19 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:19 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:19 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:19 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:19 DEBUG opendrift.models.basemodel:2054: -2.1828163327418135e-20 <- latitude -> 8.992993380796009e-06
20:14:19 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980455420742544e-05
20:14:19 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:19 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:19 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:19 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:19 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:19 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:19 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:19 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059495e-12 degrees.
20:14:20 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:20 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:20 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.313969 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313841 (min) 0.313758 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:20 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:20 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:20 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:20 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:20 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005951e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313806 (min) 0.3141 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315048 (min) 0.338745 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556836e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313844 (min) 0.314155 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315108 (min) 0.338886 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562195e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.314065 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318136 (min) 0.362765 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:20 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:20 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:20 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:20 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:20 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:20 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:20 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:05
20:14:20 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:20 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:20 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:20 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:20 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:20 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:20 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:20 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:20 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:20 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:20 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:20 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:20 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:20 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:20 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:20 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:20 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:20 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:20 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:20 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:20 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:17 to 2000-01-01 00:00:05)
20:14:20 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:20 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:20 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:20 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:20 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:20 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:20 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:20 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:20 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:20 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:20 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:20 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:20 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:20 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:20 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314157 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350327 (min) 0.463286 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:20 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:20 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:20 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:20 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:20 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313947 (min) 0.314107 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345978 (min) 0.453476 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118443e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313973 (min) 0.31414 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345966 (min) 0.453655 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621122e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314151 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340588 (min) 0.440675 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:20 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:20 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:20 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:20 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:20 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:20 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:20 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:20 DEBUG opendrift.models.basemodel:2054: -2.4359413589579878e-20 <- latitude -> 8.89244386407281e-06
20:14:20 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7851023720914843e-05
20:14:20 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:20 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
20:14:20 DEBUG opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
20:14:20 DEBUG opendrift.models.basemodel.environment:767: Data missing for 11 elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 11 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 11 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:20 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313876 (min) 0.314045 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340592 (min) 0.440458 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:20 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:20 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:20 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:20 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:20 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605065e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314129 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334333 (min) 0.42461 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314155 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334396 (min) 0.424577 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610423e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313826 (min) 0.314148 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328275 (min) 0.405766 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:20 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:20 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:20 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:20 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:20 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:20 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:20 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:20 DEBUG opendrift.models.basemodel:2054: -3.121374582976859e-20 <- latitude -> 8.935120864562511e-06
20:14:20 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7889178877041835e-05
20:14:20 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:20 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107756e-12 degrees.
20:14:20 DEBUG opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
20:14:20 DEBUG opendrift.models.basemodel.environment:767: Data missing for 21 elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 21 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 21 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:20 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314154 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328384 (min) 0.405839 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:20 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:20 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:20 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:20 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:20 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310777e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313773 (min) 0.313901 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322707 (min) 0.384769 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011313e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313782 (min) 0.313847 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322721 (min) 0.384768 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615813e-12 degrees.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314102 (min) 0.314048 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318087 (min) 0.361961 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:20 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:20 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:20 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:20 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:20 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:20 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:20 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:20 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:20 DEBUG opendrift.models.basemodel:2054: -3.8087712546549384e-20 <- latitude -> 8.958536895240385e-06
20:14:20 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7920968949272652e-05
20:14:20 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:20 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113149e-12 degrees.
20:14:20 DEBUG opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
20:14:20 DEBUG opendrift.models.basemodel.environment:767: Data missing for 38 elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:20 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:20 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:20 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:20 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:20 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:20 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:20 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:20 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 38 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 38 elements
20:14:20 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:20 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:20 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313937 (min) 0.313699 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318114 (min) 0.360008 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:20 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:20 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:20 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:20 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:20 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631929e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313725 (min) 0.314153 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315124 (min) 0.336166 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637296e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313704 (min) 0.314112 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315095 (min) 0.33611 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637296e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314016 (min) 0.314039 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313968 (min) 0.314613 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -4.6534994056218234e-20 <- latitude -> 8.97178591737381e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945509154107197e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4944 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653405e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 56 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 56 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 56 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 56 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313978 (min) 0.314006 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31403 (min) 0.314044 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182274e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31331 (min) 0.313922 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315086 (min) 0.339179 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193648e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313295 (min) 0.314077 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315113 (min) 0.33894 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199012e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.31369 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318147 (min) 0.362657 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -5.303168045621223e-20 <- latitude -> 8.979525647149246e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79624667662074e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4929 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236575e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 71 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 71 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 71 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 71 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313808 (min) 0.313602 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318359 (min) 0.360738 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798281e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.313378 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323032 (min) 0.381747 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.25570756332178e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.313106 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322914 (min) 0.38359 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327783e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313477 (min) 0.312742 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328815 (min) 0.404397 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -5.89975599296619e-20 <- latitude -> 8.984786093346062e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972557067505775e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4919 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910935e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 81 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 81 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 81 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 81 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313462 (min) 0.314156 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328611 (min) 0.39953 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.155743744445443e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31321 (min) 0.313415 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334981 (min) 0.424175 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.110108088001746e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313156 (min) 0.313401 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334961 (min) 0.423293 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.116627467493713e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313241 (min) 0.313618 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340732 (min) 0.439121 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -6.339486669649343e-20 <- latitude -> 8.987243693737997e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977099764838667e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.19268689489986e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 87 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 87 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 87 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313956 (min) 0.314091 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340551 (min) 0.427258 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830185e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.314022 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346219 (min) 0.453715 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381137e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313974 (min) 0.314077 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346027 (min) 0.453033 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873067e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313929 (min) 0.314071 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350347 (min) 0.462347 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -5.64282744923561e-20 <- latitude -> 8.989585353919126e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977051728139073e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295337e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 92 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 92 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 92 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.31399 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350413 (min) 0.458494 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236391e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.313681 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353037 (min) 0.464847 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29482384027391e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314046 (min) 0.313597 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352842 (min) 0.464067 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771235e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.313499 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353778 (min) 0.46577 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -5.675620352041702e-20 <- latitude -> 8.990701973543912e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797187078182594e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712271e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313987 (min) 0.313519 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353338 (min) 0.467286 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166705e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.31383 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352167 (min) 0.466316 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706899e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313705 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35186 (min) 0.465517 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193505e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.31388 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349867 (min) 0.45978 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -5.714946892118793e-20 <- latitude -> 8.990790280516432e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7958907224925958e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653278e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:21 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.313594 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350242 (min) 0.460164 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:21 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:21 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:21 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:21 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:21 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:21 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129189e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313775 (min) 0.314098 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34587 (min) 0.451702 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150626e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313863 (min) 0.314107 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345993 (min) 0.451277 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647954e-12 degrees.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:21 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313952 (min) 0.3141 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340741 (min) 0.438542 (max)
20:14:21 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:21 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:21 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:21 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:21 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:21 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:21 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:21 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:21 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:21 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:21 DEBUG opendrift.models.basemodel:2054: -4.439505074244428e-20 <- latitude -> 8.9897393826127e-06
20:14:21 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7936003019565232e-05
20:14:21 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:21 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4917 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118422e-12 degrees.
20:14:21 DEBUG opendrift.readers.basereader.variables:829: Masking 83 elements outside coverage
20:14:21 DEBUG opendrift.models.basemodel.environment:767: Data missing for 83 elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:21 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:21 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:21 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:21 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:21 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:21 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:21 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:21 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 83 elements
20:14:21 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 83 elements
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314052 (min) 0.314048 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340758 (min) 0.439509 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44259644209164e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.313936 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33447 (min) 0.424131 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310772e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.313955 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334397 (min) 0.424057 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102361e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313943 (min) 0.313707 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328423 (min) 0.405391 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: -2.2784174946915288e-20 <- latitude -> 8.990811801535459e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7952962675816877e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588982e-12 degrees.
20:14:22 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:22 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:22 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.314067 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328244 (min) 0.405202 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086322e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31388 (min) 0.314001 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322642 (min) 0.384129 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594364e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31405 (min) 0.313987 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322705 (min) 0.384037 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091685e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313965 (min) 0.314114 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318103 (min) 0.361504 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: -1.1062851640794834e-21 <- latitude -> 8.991674144073233e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963279083092896e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091706e-12 degrees.
20:14:22 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:22 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:22 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.314102 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318166 (min) 0.361631 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615851e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.314002 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31514 (min) 0.337748 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621219e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314052 (min) 0.314026 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315165 (min) 0.337728 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123892e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313895 (min) 0.314096 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313718 (min) 0.314343 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991931718098313e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7969498680294843e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113035e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.313926 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313972 (min) 0.31439 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583565e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.314088 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315173 (min) 0.338872 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594284e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313995 (min) 0.314087 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315119 (min) 0.338917 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588925e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.314151 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31832 (min) 0.36265 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991751518410098e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797306096700546e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567495e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.314143 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317263 (min) 0.362318 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4730202130541e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314138 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322877 (min) 0.384687 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556779e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314136 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322842 (min) 0.38481 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4730202130541e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.31398 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328233 (min) 0.405527 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991253738019171e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797426479595991e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546066e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.313909 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328705 (min) 0.404875 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038028e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.314107 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334785 (min) 0.423368 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043389e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.314099 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334751 (min) 0.423021 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540707e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313875 (min) 0.314005 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340577 (min) 0.438605 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990782514049296e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797708959419419e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535352e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.314101 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340984 (min) 0.43893 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529993e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313969 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34625 (min) 0.452514 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032674e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314002 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346175 (min) 0.452862 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027313e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314088 (min) 0.313631 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350442 (min) 0.462144 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991577610108295e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978705136467296e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529998e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313683 (min) 0.31404 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350256 (min) 0.461516 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:22 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:22 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:22 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49257835153e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.314006 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353119 (min) 0.467757 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524637e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.31398 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353059 (min) 0.467568 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032679e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.314031 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353979 (min) 0.46945 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:22 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:22 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:22 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:22 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:22 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:22 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:22 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:22 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:22 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99212052336864e-06
20:14:22 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797965352985374e-05
20:14:22 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:22 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032682e-12 degrees.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:22 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:22 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:22 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:22 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:22 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:22 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:22 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:22 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:22 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:22 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:22 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.31397 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353924 (min) 0.469657 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:22 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:22 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:22 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:22 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:22 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:23 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:23 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:23 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027328e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.31408 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352691 (min) 0.467991 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530006e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.314089 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352684 (min) 0.46784 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027328e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314154 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350242 (min) 0.462074 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:23 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:23 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:23 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:23 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:23 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:23 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:23 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:23 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992606922000942e-06
20:14:23 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798016851850232e-05
20:14:23 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:23 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49909773102197e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:23 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.314148 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35029 (min) 0.462858 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:23 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:23 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:23 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:23 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:23 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530014e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.313824 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346203 (min) 0.453469 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032691e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.313821 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346186 (min) 0.45363 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530016e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.31408 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340324 (min) 0.44074 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:23 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:23 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:23 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:23 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:23 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:23 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:23 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:23 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99287472919848e-06
20:14:23 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79802787627304e-05
20:14:23 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:23 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49257835153002e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:23 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314047 (min) 0.314086 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340555 (min) 0.440621 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:23 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:23 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:23 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:23 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:23 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032703e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.313923 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334581 (min) 0.421875 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098534726e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31396 (min) 0.313971 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334546 (min) 0.421444 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535385e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314127 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327932 (min) 0.403202 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:23 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:23 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:23 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:23 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:23 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:23 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:23 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:23 DEBUG opendrift.models.basemodel:2054: -6.989263475174245e-21 <- latitude -> 8.993018710452196e-06
20:14:23 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797982413608008e-05
20:14:23 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:23 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203807e-12 degrees.
20:14:23 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:23 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:23 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:23 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:23 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.314126 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328528 (min) 0.405878 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:23 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:23 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:23 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:23 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:23 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043439e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.313706 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322726 (min) 0.384794 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4773664660488e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.313511 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322725 (min) 0.384746 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043444e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.314084 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318052 (min) 0.362105 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:23 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:23 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:23 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:23 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:23 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:23 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:23 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:23 DEBUG opendrift.models.basemodel:2054: -1.4395617929515397e-20 <- latitude -> 8.99308749704527e-06
20:14:23 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978401136971028e-05
20:14:23 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:23 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:23 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:23 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:23 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:23 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:23 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.314134 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318187 (min) 0.361851 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:23 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:23 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:23 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:23 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:23 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:23 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540731e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313971 (min) 0.314104 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31466 (min) 0.338421 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47953959254609e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.314043 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314605 (min) 0.338383 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546092e-12 degrees.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314064 (min) 0.313811 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314081 (min) 0.314152 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:23 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:23 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:23 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:23 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:23 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:23 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:23 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:23 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:23 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:23 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:23 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:23 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:23 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:23 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:23 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:23 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:23 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:23 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:23 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:23 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:23 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:05.500000
20:14:23 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:23 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:23 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:23 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:23 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:23 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:23 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:23 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:23 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:23 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:23 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:23 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:23 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:23 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:23 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:23 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:23 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:23 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:23 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:23 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:23 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:17.500000 to 2000-01-01 00:00:05.500000)
20:14:23 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:23 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:23 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:23 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:23 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:24 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:24 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31407 (min) 0.314085 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353801 (min) 0.471236 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615763e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314075 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35277 (min) 0.468943 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314044 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352765 (min) 0.469157 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.314159 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350196 (min) 0.463276 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -2.1168559198621123e-20 <- latitude -> 8.893767138302834e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7847537821127982e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31399 (min) 0.314083 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350156 (min) 0.463178 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960506e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.314069 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345968 (min) 0.453051 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960506e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.314117 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34596 (min) 0.453455 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661042e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313846 (min) 0.314068 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340644 (min) 0.440485 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -2.4700410286590682e-20 <- latitude -> 8.93734917212032e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.788177034650696e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605072e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.314009 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340329 (min) 0.439734 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313864 (min) 0.314159 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334277 (min) 0.422646 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113121e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313838 (min) 0.314151 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334389 (min) 0.422982 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328292 (min) 0.404259 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -3.0593903814415614e-20 <- latitude -> 8.960828963967035e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.791116611732872e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4968 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610458e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 32 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 32 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 32 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 32 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313809 (min) 0.314112 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328427 (min) 0.405838 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118512e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.314132 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32248 (min) 0.384763 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626558e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313991 (min) 0.314138 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322555 (min) 0.384767 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41651892412388e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313989 (min) 0.313822 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317944 (min) 0.361959 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -3.790401480354704e-20 <- latitude -> 8.97356086179563e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7935640224897203e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134614e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 49 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 49 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 49 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313986 (min) 0.314017 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31789 (min) 0.359254 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653404e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313782 (min) 0.314101 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314996 (min) 0.337411 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669487e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313734 (min) 0.314147 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314971 (min) 0.337342 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38392202666413e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.313427 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314127 (min) 0.314568 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -4.675601695661952e-20 <- latitude -> 8.980890550591392e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7954470355477844e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4933 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182928e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 67 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 67 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 67 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 67 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312943 (min) 0.313551 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314041 (min) 0.314725 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231205e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.314159 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31522 (min) 0.338172 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.316555105246657e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.314131 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315194 (min) 0.337483 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.314381978749983e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312963 (min) 0.312663 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318289 (min) 0.361146 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -5.307112495432743e-20 <- latitude -> 8.985459621059478e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967344879138735e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4921 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.27309257530032e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 79 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 79 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 79 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 79 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312879 (min) 0.314099 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318307 (min) 0.359674 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381425e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.313105 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323013 (min) 0.383048 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.186167515407618e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314125 (min) 0.313239 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322923 (min) 0.382048 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910304e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313537 (min) 0.314147 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328524 (min) 0.402753 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -4.9760209646069386e-20 <- latitude -> 8.988214318561554e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797471910035685e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4915 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.123146846985627e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 85 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 85 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 85 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 85 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314004 (min) 0.313723 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328491 (min) 0.406718 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910561e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313951 (min) 0.314008 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334493 (min) 0.411051 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.147051238455518e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313934 (min) 0.314042 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334787 (min) 0.408603 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617948114e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313966 (min) 0.314079 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340835 (min) 0.422124 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -6.334673516427327e-20 <- latitude -> 8.989295733904804e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977409803359986e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359042e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 91 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 91 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 91 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313896 (min) 0.314026 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340833 (min) 0.441341 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:24 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:24 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:24 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289952e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313869 (min) 0.31398 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346243 (min) 0.448909 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338233e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313842 (min) 0.314015 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346378 (min) 0.447872 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.25136131032752e-12 degrees.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313914 (min) 0.313899 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350209 (min) 0.456681 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:24 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:24 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:24 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:24 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:24 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:24 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:24 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:24 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:24 DEBUG opendrift.models.basemodel:2054: -5.660757396914431e-20 <- latitude -> 8.989282805213926e-06
20:14:24 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975653160720984e-05
20:14:24 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:24 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755124e-12 degrees.
20:14:24 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:24 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:24 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:24 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:24 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:24 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:24 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:24 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:24 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:24 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:24 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:24 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:24 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313994 (min) 0.313719 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350453 (min) 0.458231 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:24 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:24 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:24 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:24 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:24 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706881e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.313742 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353017 (min) 0.464747 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241075e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.313676 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352812 (min) 0.464384 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733686e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.31365 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353787 (min) 0.4661 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: -5.2736613058201727e-20 <- latitude -> 8.988558771982971e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796800931109771e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014684781e-12 degrees.
20:14:25 DEBUG opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
20:14:25 DEBUG opendrift.models.basemodel.environment:767: Data missing for 95 elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 95 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 95 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.31403 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353592 (min) 0.467666 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145264e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313847 (min) 0.314014 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352497 (min) 0.466875 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669382e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313908 (min) 0.313984 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352684 (min) 0.466278 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664025e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.314029 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350201 (min) 0.460519 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: -4.034485977718526e-20 <- latitude -> 8.987291902173418e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950656148628448e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129143e-12 degrees.
20:14:25 DEBUG opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
20:14:25 DEBUG opendrift.models.basemodel.environment:767: Data missing for 95 elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 95 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 95 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313523 (min) 0.313554 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349148 (min) 0.461623 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102366e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313995 (min) 0.314089 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346145 (min) 0.450135 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621123e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314013 (min) 0.314076 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346144 (min) 0.449833 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661041e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313884 (min) 0.313978 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340727 (min) 0.437091 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: -2.2481121842201822e-20 <- latitude -> 8.989530219468694e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945147364681457e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097031e-12 degrees.
20:14:25 DEBUG opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
20:14:25 DEBUG opendrift.models.basemodel.environment:767: Data missing for 87 elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 87 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 87 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31368 (min) 0.314148 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340767 (min) 0.439342 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594378e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314087 (min) 0.313975 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3343 (min) 0.423523 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661046e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.313971 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334246 (min) 0.423295 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011314e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.31414 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328404 (min) 0.404742 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: -3.942265933515492e-21 <- latitude -> 8.990474367135926e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7959322898966678e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107683e-12 degrees.
20:14:25 DEBUG opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
20:14:25 DEBUG opendrift.models.basemodel.environment:767: Data missing for 1 elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 1 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 1 elements
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313952 (min) 0.314033 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328161 (min) 0.404141 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075538e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31393 (min) 0.31398 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322443 (min) 0.383731 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588932e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313964 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322423 (min) 0.383557 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578217e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314052 (min) 0.314083 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317853 (min) 0.361149 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990541499365345e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79682425481516e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556785e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.313773 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318166 (min) 0.361254 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043393e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.31395 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314551 (min) 0.337947 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551433e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.313922 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314695 (min) 0.337867 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551434e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313666 (min) 0.314012 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314122 (min) 0.31454 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99103364895499e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797174627495117e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.314133 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313988 (min) 0.314563 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203805e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.31402 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315182 (min) 0.338503 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48388584554073e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.314033 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315137 (min) 0.338824 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540731e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314064 (min) 0.313941 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318279 (min) 0.362584 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991488739646816e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976230892987417e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038055e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314071 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3182 (min) 0.361617 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546104e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313869 (min) 0.314151 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322704 (min) 0.384716 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043424e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313763 (min) 0.314153 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322906 (min) 0.384204 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038067e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313962 (min) 0.31398 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328622 (min) 0.404823 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992205996828419e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797821275826435e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043435e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.314151 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328516 (min) 0.405881 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054163e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.314086 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334886 (min) 0.425005 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551483e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.314098 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33496 (min) 0.424469 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556839e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.31411 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340993 (min) 0.440342 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992615962006059e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797890300979469e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556853e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.31397 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340879 (min) 0.439935 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:25 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:25 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:25 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:25 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:25 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:25 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46215458056758e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313401 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346223 (min) 0.452879 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567583e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.313414 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346274 (min) 0.452166 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46215458056758e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.3137 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350315 (min) 0.461428 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:25 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:25 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:25 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:25 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:25 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:25 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:25 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:25 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:25 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:25 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992827106707768e-06
20:14:25 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978865883221054e-05
20:14:25 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:25 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070195e-12 degrees.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:25 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:25 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:25 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:25 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:25 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:25 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:25 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:25 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:25 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:25 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:25 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.313996 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350235 (min) 0.462582 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:25 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:26 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:26 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:26 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:26 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:26 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064843e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314155 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353051 (min) 0.468831 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567525e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314154 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353091 (min) 0.468715 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070203e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.31415 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353921 (min) 0.470576 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:26 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:26 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:26 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:26 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:26 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:26 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:26 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:26 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992917531933365e-06
20:14:26 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978328518187984e-05
20:14:26 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:26 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46432770706485e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:26 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.314078 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353947 (min) 0.470164 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:26 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:26 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:26 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:26 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:26 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562175e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313922 (min) 0.314121 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353012 (min) 0.468758 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064857e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.314152 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353045 (min) 0.468584 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562178e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313911 (min) 0.314094 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350367 (min) 0.462797 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:26 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:26 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:26 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:26 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:26 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:26 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:26 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:26 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99293792607438e-06
20:14:26 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978536789949082e-05
20:14:26 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:26 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46432770706486e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:26 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.313786 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350397 (min) 0.462764 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:26 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:26 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:26 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:26 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:26 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059511e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31368 (min) 0.314108 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346151 (min) 0.453073 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070232e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313858 (min) 0.314078 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346104 (min) 0.452793 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46215458056755e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313627 (min) 0.314158 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340703 (min) 0.43996 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:26 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:26 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:26 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:26 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:26 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:26 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:26 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:26 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992915185000504e-06
20:14:26 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980418305768747e-05
20:14:26 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:26 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454069583e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:26 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.314117 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340583 (min) 0.438824 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:26 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:26 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:26 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:26 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:26 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572929e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.314029 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334577 (min) 0.424371 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572932e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313926 (min) 0.314127 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334533 (min) 0.424296 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080968e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.31413 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328399 (min) 0.405646 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:26 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:26 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:26 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:26 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:26 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:26 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:26 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:26 DEBUG opendrift.models.basemodel:2054: -6.89098065800742e-21 <- latitude -> 8.99285645176638e-06
20:14:26 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982020250854123e-05
20:14:26 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:26 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4621545805675e-12 degrees.
20:14:26 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:26 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:26 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:26 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:26 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314115 (min) 0.314099 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328529 (min) 0.405384 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:26 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:26 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:26 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:26 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:26 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054105e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.314082 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32275 (min) 0.384875 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556785e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.314062 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322739 (min) 0.3849 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.314046 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317907 (min) 0.362148 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:26 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:26 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:26 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:26 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:26 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:26 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:26 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:06
20:14:26 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:26 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:26 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:26 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:26 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:26 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:26 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:26 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:26 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:26 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:26 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:26 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:26 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:26 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:26 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:26 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:26 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:26 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:26 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:26 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:26 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:18 to 2000-01-01 00:00:06)
20:14:26 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:26 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:26 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:26 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:26 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:26 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:26 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:26 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:26 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:26 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:26 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:26 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:26 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:26 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:26 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:26 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:26 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:26 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:26 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:26 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:26 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:26 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:26 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:26 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:26 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:26 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350573 (min) 0.463827 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:26 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:26 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:26 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:26 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:26 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118443e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.314075 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35296 (min) 0.469166 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.314055 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352876 (min) 0.469432 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314112 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353654 (min) 0.471227 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -2.090072202147033e-20 <- latitude -> 8.893840465433163e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7847435878822186e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011309e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313781 (min) 0.314159 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35384 (min) 0.471129 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960506e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.314031 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352963 (min) 0.468603 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310774e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.314079 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353024 (min) 0.469046 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107741e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.314156 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350222 (min) 0.463169 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -2.1517966259293895e-20 <- latitude -> 8.938117675150684e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7878996997084053e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610239e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 16 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 16 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 16 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313857 (min) 0.314151 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350197 (min) 0.462622 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310776e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313917 (min) 0.314051 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346103 (min) 0.452798 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313959 (min) 0.314005 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346102 (min) 0.453306 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313876 (min) 0.314151 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340712 (min) 0.440342 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -2.571689729359303e-20 <- latitude -> 8.96226730982333e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7905384007889057e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610449e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 27 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 27 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 27 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313951 (min) 0.314109 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340399 (min) 0.439758 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113145e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31352 (min) 0.314158 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33455 (min) 0.422695 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361583e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313587 (min) 0.314155 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334551 (min) 0.422612 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621188e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.314022 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328338 (min) 0.40395 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -3.134147034286065e-20 <- latitude -> 8.974969838054986e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7928039231723076e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4957 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 43 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 43 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 43 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 43 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313406 (min) 0.313703 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328258 (min) 0.405828 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139333e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313677 (min) 0.314148 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322732 (min) 0.382882 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642666e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313667 (min) 0.314128 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322735 (min) 0.382659 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642671e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313841 (min) 0.314153 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317975 (min) 0.360382 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -3.747215477008149e-20 <- latitude -> 8.982309423924506e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7946867191271436e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4939 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664128e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 61 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 61 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 61 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 61 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.313866 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318044 (min) 0.360104 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690959e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.313248 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315079 (min) 0.337749 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696331e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.313423 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315131 (min) 0.337764 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701693e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.314062 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313951 (min) 0.314379 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -4.5347359933172146e-20 <- latitude -> 8.985723445754857e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7961269540206953e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4925 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123657e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 75 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 75 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 75 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 75 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313839 (min) 0.314079 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31415 (min) 0.313533 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787545e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313818 (min) 0.313896 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314972 (min) 0.337446 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26440006931168e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313795 (min) 0.314054 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314973 (min) 0.336644 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311683e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314011 (min) 0.314153 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318327 (min) 0.360287 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -4.4652878816906343e-20 <- latitude -> 8.988769054499387e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970940036438914e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4916 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878745e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 84 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 84 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 84 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 84 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313823 (min) 0.313212 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318346 (min) 0.361529 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:27 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:27 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:27 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.129666226477996e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313742 (min) 0.313672 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323058 (min) 0.385498 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.105761835007498e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313713 (min) 0.313732 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32301 (min) 0.385877 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.101415582012237e-12 degrees.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313806 (min) 0.313903 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328549 (min) 0.406771 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:27 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:27 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:27 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:27 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:27 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:27 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:27 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:27 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:27 DEBUG opendrift.models.basemodel:2054: -4.9709563329096624e-20 <- latitude -> 8.990460246724167e-06
20:14:27 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976105906836163e-05
20:14:27 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:27 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4910 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.160089997440085e-12 degrees.
20:14:27 DEBUG opendrift.readers.basereader.variables:829: Masking 90 elements outside coverage
20:14:27 DEBUG opendrift.models.basemodel.environment:767: Data missing for 90 elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:27 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:27 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:27 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:27 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:27 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:27 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:27 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:27 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 90 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 90 elements
20:14:27 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:27 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:27 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.313965 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328691 (min) 0.391643 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:27 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:27 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:27 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:27 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:27 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862346e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313928 (min) 0.313962 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335023 (min) 0.423473 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402545e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.313888 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334973 (min) 0.42435 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.197033147894473e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.313954 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3408 (min) 0.440153 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: -5.2181440147616896e-20 <- latitude -> 8.991232858200793e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977120432260743e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4907 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814092e-12 degrees.
20:14:28 DEBUG opendrift.readers.basereader.variables:829: Masking 93 elements outside coverage
20:14:28 DEBUG opendrift.models.basemodel.environment:767: Data missing for 93 elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 93 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 93 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313982 (min) 0.314129 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340815 (min) 0.435489 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755147e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.314147 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34617 (min) 0.448781 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.279611954792662e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.31412 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346303 (min) 0.447825 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28613133428463e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314151 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350417 (min) 0.456639 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: -5.047544604250679e-20 <- latitude -> 8.991406697229629e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973491324606636e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496716987e-12 degrees.
20:14:28 DEBUG opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
20:14:28 DEBUG opendrift.models.basemodel.environment:767: Data missing for 95 elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 95 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 95 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.313785 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350434 (min) 0.458902 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172055e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.313845 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353039 (min) 0.465816 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876208928e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314035 (min) 0.313896 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353092 (min) 0.464882 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696176e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314064 (min) 0.313985 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353981 (min) 0.466621 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: -4.274975372050603e-20 <- latitude -> 8.991200140275654e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796283973407593e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39261453265327e-12 degrees.
20:14:28 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:28 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314086 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353768 (min) 0.467692 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314024 (min) 0.314042 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352774 (min) 0.46636 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642576e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31403 (min) 0.314019 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352882 (min) 0.465581 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637217e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313974 (min) 0.314005 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35033 (min) 0.459843 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: -2.956359269423135e-20 <- latitude -> 8.99072573367425e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7939887630989356e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118483e-12 degrees.
20:14:28 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:28 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.31399 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350255 (min) 0.461972 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44259644209162e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31313 (min) 0.314057 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345627 (min) 0.452515 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113053e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313057 (min) 0.314054 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345607 (min) 0.452165 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610374e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313875 (min) 0.31399 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340716 (min) 0.439332 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: -1.3638802352448506e-20 <- latitude -> 8.989985099376703e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7952506623809748e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4910 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201074898e-12 degrees.
20:14:28 DEBUG opendrift.readers.basereader.variables:829: Masking 90 elements outside coverage
20:14:28 DEBUG opendrift.models.basemodel.environment:767: Data missing for 90 elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 90 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 90 elements
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.313781 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340542 (min) 0.440082 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562165e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313555 (min) 0.314068 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334373 (min) 0.423466 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572888e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313822 (min) 0.314087 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334323 (min) 0.423665 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45998145407021e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314089 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328438 (min) 0.405006 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99032682892356e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796476454886605e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562185e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.314023 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328488 (min) 0.405078 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064883e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313937 (min) 0.314157 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322704 (min) 0.384695 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070239e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313931 (min) 0.314156 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322728 (min) 0.384657 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075603e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313804 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318121 (min) 0.361964 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991205794247543e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972128565414303e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080978e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314013 (min) 0.314116 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318167 (min) 0.360123 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091724e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313975 (min) 0.314124 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314877 (min) 0.337299 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599765e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.314133 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314805 (min) 0.337331 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599768e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.314142 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314015 (min) 0.314089 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991757132191448e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975619016682497e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610395e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314007 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31354 (min) 0.314056 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097013e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.313921 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315256 (min) 0.338946 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102372e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.313968 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315235 (min) 0.338737 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610237e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.313905 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318224 (min) 0.362492 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:28 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:28 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:28 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:28 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:28 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:28 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:28 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:28 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:28 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99208709772938e-06
20:14:28 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797602596415402e-05
20:14:28 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:28 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594346e-12 degrees.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:28 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:28 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:28 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:28 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:28 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.31411 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318234 (min) 0.362031 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:28 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:28 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:28 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:28 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:28 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:28 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:28 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:28 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:28 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:28 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:28 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:28 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:28 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:28 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594359e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313885 (min) 0.314107 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322986 (min) 0.385632 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599723e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314011 (min) 0.314113 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322994 (min) 0.385297 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259972e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31395 (min) 0.314098 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328679 (min) 0.406186 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992316979675417e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797912262217076e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097054e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313504 (min) 0.314003 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328713 (min) 0.404947 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:29 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:29 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:29 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605014e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.313826 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334919 (min) 0.424771 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610468e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313843 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334776 (min) 0.424848 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107788e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.313963 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341011 (min) 0.440692 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992684714511435e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980880546931906e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4404233155943e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.313696 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340744 (min) 0.440723 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:29 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:29 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:29 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583584e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.31414 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346007 (min) 0.453286 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583587e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.314148 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346141 (min) 0.453836 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583587e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313946 (min) 0.313903 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350378 (min) 0.463178 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992898305078084e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981907114931895e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075553e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313711 (min) 0.314075 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350312 (min) 0.461957 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:29 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:29 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:29 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567515e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314034 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352954 (min) 0.468665 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572872e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313976 (min) 0.314063 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353025 (min) 0.469117 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567516e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.314002 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353945 (min) 0.470989 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993004296707082e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982535123275215e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567521e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313925 (min) 0.31395 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353965 (min) 0.470186 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:29 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:29 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:29 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562164e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313972 (min) 0.314104 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352889 (min) 0.468307 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562167e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314032 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352971 (min) 0.467954 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064847e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31397 (min) 0.314053 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35039 (min) 0.462186 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993024981691048e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982913421565265e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562174e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.314137 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350332 (min) 0.463083 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:29 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:29 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:29 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064859e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.314108 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345902 (min) 0.452807 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562178e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.314126 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345847 (min) 0.452539 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059501e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.314124 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340649 (min) 0.439695 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99295697004009e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798307238676991e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562191e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.314154 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340824 (min) 0.439787 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:29 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:29 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:29 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567554e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314138 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33465 (min) 0.424495 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567555e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.314117 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33461 (min) 0.424582 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567555e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313931 (min) 0.314011 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328242 (min) 0.40585 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:29 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:29 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:29 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:29 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:29 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:29 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:29 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:06.500000
20:14:29 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:29 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:29 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:29 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:29 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:29 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:29 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:29 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:29 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:29 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:29 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:29 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:29 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:29 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:29 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:29 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:29 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:29 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:29 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:29 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:29 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:18.500000 to 2000-01-01 00:00:06.500000)
20:14:29 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:29 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:29 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:29 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:29 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:29 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:29 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:29 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:29 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:29 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:29 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:29 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:29 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:29 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:29 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:29 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:29 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:29 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:29 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:29 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:29 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:29 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:29 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:29 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:29 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:29 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:29 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.314151 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341032 (min) 0.441781 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:29 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313972 (min) 0.314111 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346248 (min) 0.454459 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621122e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313997 (min) 0.314126 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346276 (min) 0.454453 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621122e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314158 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350489 (min) 0.463751 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -2.380135454919603e-20 <- latitude -> 8.89264242679939e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.785072236155521e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 11 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 11 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 11 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314058 (min) 0.314113 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350395 (min) 0.463502 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107741e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314114 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352845 (min) 0.469197 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107743e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.314133 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353011 (min) 0.468977 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610421e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313987 (min) 0.314089 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353814 (min) 0.470787 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -2.217554705895394e-20 <- latitude -> 8.937659330050718e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.788145097050756e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605072e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 16 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 16 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 16 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313906 (min) 0.314129 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35357 (min) 0.470103 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960508e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314048 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352951 (min) 0.467572 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314092 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353017 (min) 0.468516 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107762e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.314153 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350325 (min) 0.46266 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -2.238869911559124e-20 <- latitude -> 8.962416408744911e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.790519087595276e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 23 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 23 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 23 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.314041 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350007 (min) 0.462203 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615824e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313955 (min) 0.314144 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345809 (min) 0.45093 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177117856e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31393 (min) 0.314158 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345734 (min) 0.450426 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313944 (min) 0.313667 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340546 (min) 0.437614 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -2.510041305969973e-20 <- latitude -> 8.9756287325612e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.792503850954549e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123878e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.314038 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340134 (min) 0.440114 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631932e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314018 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334428 (min) 0.42165 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139978e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314115 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334423 (min) 0.421126 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134615e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312734 (min) 0.313952 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328386 (min) 0.402841 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -3.140995708193711e-20 <- latitude -> 8.98312614684786e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7942058958180225e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4947 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150719e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 53 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 53 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 53 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 53 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.314159 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328199 (min) 0.405837 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3795757736695e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314148 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322549 (min) 0.383985 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172187e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.314143 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322493 (min) 0.383908 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177546e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313767 (min) 0.314156 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318078 (min) 0.361315 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -3.7931243319762525e-20 <- latitude -> 8.986918861007776e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7956148940957087e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4929 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701697e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 71 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 71 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 71 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 71 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313641 (min) 0.313953 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318109 (min) 0.361284 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241293e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313703 (min) 0.314128 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315138 (min) 0.337303 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252667e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313679 (min) 0.314159 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315138 (min) 0.337396 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599258027e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313664 (min) 0.313086 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314078 (min) 0.313928 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -4.055785958569598e-20 <- latitude -> 8.988272622146848e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7966807777674055e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4918 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300957e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 82 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 82 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 82 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 82 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313993 (min) 0.313925 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314062 (min) 0.313216 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370067e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313873 (min) 0.313506 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315059 (min) 0.338131 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.19703314789484e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313843 (min) 0.313303 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31489 (min) 0.337424 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.192686894900203e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.312777 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318249 (min) 0.361146 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -4.3621468201195405e-20 <- latitude -> 8.990108800554717e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797371602487914e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4912 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.120973720488718e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 88 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 88 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 88 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 88 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313908 (min) 0.313417 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31827 (min) 0.362916 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.164436250434684e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313796 (min) 0.313855 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322967 (min) 0.374788 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.134012479471577e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313753 (min) 0.313771 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323053 (min) 0.37389 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.136185605968897e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313717 (min) 0.313859 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32863 (min) 0.394203 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -4.603611153964318e-20 <- latitude -> 8.991341285107738e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797686664972451e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381087e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 92 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 92 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 92 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31372 (min) 0.314025 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328577 (min) 0.404343 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311394e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313967 (min) 0.314077 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334983 (min) 0.420261 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851592e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313958 (min) 0.314094 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334863 (min) 0.419346 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343556e-12 degrees.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31395 (min) 0.313786 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34073 (min) 0.434758 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:30 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:30 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:30 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:30 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:30 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:30 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:30 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:30 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:30 DEBUG opendrift.models.basemodel:2054: -4.6659268636789155e-20 <- latitude -> 8.992104539609909e-06
20:14:30 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976104993415636e-05
20:14:30 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:30 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268523e-12 degrees.
20:14:30 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:30 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:30 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:30 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:30 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:30 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:30 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31382 (min) 0.313894 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340873 (min) 0.435614 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:30 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:30 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:30 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:30 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:30 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:30 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:30 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:30 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:30 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:30 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:30 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:30 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:30 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:30 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321492e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31365 (min) 0.314079 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346357 (min) 0.449625 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3187282317444e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313665 (min) 0.314093 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346319 (min) 0.448732 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241721e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313963 (min) 0.313859 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350249 (min) 0.45762 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: -4.353398047811592e-20 <- latitude -> 8.992546009414173e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970119497154053e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685424e-12 degrees.
20:14:31 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:31 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313888 (min) 0.314123 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350497 (min) 0.458867 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145258e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313734 (min) 0.314065 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353045 (min) 0.466527 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172058e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313556 (min) 0.314044 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353115 (min) 0.466061 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313613 (min) 0.314056 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353987 (min) 0.467816 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: -3.563890843860351e-20 <- latitude -> 8.992760081978344e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795536981338096e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631812e-12 degrees.
20:14:31 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:31 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.313892 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353586 (min) 0.469045 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599674e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.313604 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352801 (min) 0.464873 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113074e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.313727 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35271 (min) 0.465251 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610399e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.313901 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350232 (min) 0.459517 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: -2.358956065113473e-20 <- latitude -> 8.992788901580048e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7942083100432838e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588975e-12 degrees.
20:14:31 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:31 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.313963 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350233 (min) 0.461367 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086318e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.314043 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345665 (min) 0.452481 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097044e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313947 (min) 0.314073 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345844 (min) 0.452592 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091686e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.314149 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340704 (min) 0.439744 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: -9.234186035656329e-21 <- latitude -> 8.992618118867534e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795878788263685e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605104e-12 degrees.
20:14:31 DEBUG opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
20:14:31 DEBUG opendrift.models.basemodel.environment:767: Data missing for 92 elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 92 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 92 elements
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.313788 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340603 (min) 0.43884 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123251e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313622 (min) 0.314089 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334532 (min) 0.423732 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134625e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313854 (min) 0.314102 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334472 (min) 0.423964 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40782641813463e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313841 (min) 0.31401 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328184 (min) 0.405261 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992672913383807e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796953237368862e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38174890016683e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313885 (min) 0.314031 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328024 (min) 0.405387 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150623e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313666 (min) 0.314016 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322441 (min) 0.384364 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38609515316135e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313881 (min) 0.313969 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322347 (min) 0.384361 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965867e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313916 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317739 (min) 0.361682 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992811548290175e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974090078096252e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647977e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314155 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317874 (min) 0.361545 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637176e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.314056 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314844 (min) 0.337951 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615593e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314044 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31474 (min) 0.337893 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150572e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314003 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313466 (min) 0.31452 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992972250261373e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797846544541673e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.314127 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313915 (min) 0.314234 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086242e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313767 (min) 0.31406 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314921 (min) 0.338632 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594281e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313602 (min) 0.314076 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314762 (min) 0.338569 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559428e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313845 (min) 0.314135 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318133 (min) 0.362132 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993071672577217e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798021657968878e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567486e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.314037 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31801 (min) 0.362222 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048735e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.313943 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322957 (min) 0.38533 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054092e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.313901 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323004 (min) 0.385628 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556773e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.314096 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328574 (min) 0.406528 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993130399480124e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798063579702873e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546056e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.313647 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328626 (min) 0.404956 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032664e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314112 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334866 (min) 0.424189 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038021e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314124 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334722 (min) 0.424786 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535341e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313824 (min) 0.313889 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341009 (min) 0.440679 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993161713011529e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980319440055737e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529982e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.313899 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340784 (min) 0.440593 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:31 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:31 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:31 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:31 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:31 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:31 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021943e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.313954 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346317 (min) 0.453692 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021943e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.313933 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346318 (min) 0.453352 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027307e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313815 (min) 0.313826 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350288 (min) 0.462665 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:31 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:31 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:31 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:31 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:31 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:31 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:31 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:31 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:31 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:31 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993175221267095e-06
20:14:31 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979544605392672e-05
20:14:31 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:31 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016587e-12 degrees.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:31 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:31 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:31 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:31 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:31 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:31 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:31 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:31 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:31 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:31 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:31 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313836 (min) 0.314076 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350385 (min) 0.461331 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:31 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:32 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:32 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:32 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:32 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:32 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513908e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.313613 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352963 (min) 0.468922 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513908e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.313883 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352954 (min) 0.468472 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513908e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.313812 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353911 (min) 0.470344 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:32 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:32 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:32 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:32 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:32 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:32 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:32 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:32 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993177763092434e-06
20:14:32 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797838457688259e-05
20:14:32 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:32 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011228e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:32 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.314142 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353844 (min) 0.469122 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:32 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:32 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:32 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:32 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:32 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011234e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.314023 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353051 (min) 0.468699 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011231e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.314062 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353069 (min) 0.468524 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513915e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314128 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350396 (min) 0.462739 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:32 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:32 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:32 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:32 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:32 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:32 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:32 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:32 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993173480050639e-06
20:14:32 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976725012642287e-05
20:14:32 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:32 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.509963363508552e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:32 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.313983 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350314 (min) 0.461633 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:32 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:32 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:32 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:32 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:32 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.50996336350855e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.314059 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346133 (min) 0.453321 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.512136490005873e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314019 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34617 (min) 0.453189 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.509963363508554e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.314091 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340823 (min) 0.440338 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:32 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:32 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:32 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:32 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:32 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:32 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:32 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:07
20:14:32 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:32 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:32 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:32 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:32 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:32 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:32 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:32 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:32 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:32 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:32 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:32 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:32 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:32 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:32 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:32 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:32 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:32 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:32 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:32 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:32 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:19 to 2000-01-01 00:00:07)
20:14:32 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:32 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:32 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:32 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:32 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:32 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:32 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:32 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:32 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:32 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:32 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:32 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:32 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:32 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:32 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.314088 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328728 (min) 0.407256 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:32 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:32 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:32 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:32 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:32 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314078 (min) 0.314158 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335033 (min) 0.425878 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621125e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313939 (min) 0.314156 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335053 (min) 0.425788 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118445e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314137 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341008 (min) 0.441673 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:32 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:32 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:32 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:32 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:32 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:32 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:32 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:32 DEBUG opendrift.models.basemodel:2054: -2.933257088558232e-20 <- latitude -> 8.890530679564665e-06
20:14:32 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7856897250055863e-05
20:14:32 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:32 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605056e-12 degrees.
20:14:32 DEBUG opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
20:14:32 DEBUG opendrift.models.basemodel.environment:767: Data missing for 13 elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 13 elements
20:14:32 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 13 elements
20:14:32 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:32 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313899 (min) 0.314064 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341116 (min) 0.441766 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:32 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:32 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:32 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:32 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:32 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313634 (min) 0.314148 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346356 (min) 0.454315 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313881 (min) 0.314141 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34614 (min) 0.45453 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.31403 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350377 (min) 0.463826 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:32 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:32 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:32 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:32 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:32 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:32 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:32 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:32 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:32 DEBUG opendrift.models.basemodel:2054: -2.543363119770561e-20 <- latitude -> 8.935687722197119e-06
20:14:32 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7888579803899894e-05
20:14:32 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:32 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610434e-12 degrees.
20:14:32 DEBUG opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
20:14:32 DEBUG opendrift.models.basemodel.environment:767: Data missing for 16 elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:32 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:32 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:32 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:32 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:32 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:32 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:32 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:32 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:32 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 16 elements
20:14:32 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 16 elements
20:14:32 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:32 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:32 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314102 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350488 (min) 0.463827 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:32 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:32 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:32 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:32 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:32 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113124e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313889 (min) 0.314112 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352963 (min) 0.468973 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113126e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313828 (min) 0.314095 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352726 (min) 0.46843 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610447e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313803 (min) 0.314137 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353654 (min) 0.470235 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -2.265241933460592e-20 <- latitude -> 8.961231734665112e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.791062625815107e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615818e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 21 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 21 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 21 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.31398 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353925 (min) 0.471236 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313445 (min) 0.314114 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352223 (min) 0.468418 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118511e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313579 (min) 0.314138 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352513 (min) 0.467991 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621191e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31338 (min) 0.314122 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350118 (min) 0.462135 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -2.2008634170541858e-20 <- latitude -> 8.975352476648791e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7927652614377984e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626563e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 27 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 27 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 27 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313531 (min) 0.314143 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350206 (min) 0.46326 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631935e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312318 (min) 0.313911 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346032 (min) 0.449886 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513998e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312342 (min) 0.314002 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346082 (min) 0.449064 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637299e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313746 (min) 0.314043 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340623 (min) 0.436467 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -2.463490978338109e-20 <- latitude -> 8.983177998467943e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7941869917322103e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648037e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 40 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 40 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 40 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.313559 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.337958 (min) 0.440752 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664136e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313602 (min) 0.314031 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334617 (min) 0.423474 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37740264717218e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31351 (min) 0.314101 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334632 (min) 0.423339 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172182e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313578 (min) 0.313531 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328328 (min) 0.404729 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -2.843735034701641e-20 <- latitude -> 8.987457203152393e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7954020290864672e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4938 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635192998e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 62 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 62 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 62 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 62 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313853 (min) 0.314033 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328421 (min) 0.404614 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220477e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313607 (min) 0.31391 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322634 (min) 0.383713 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231205e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313603 (min) 0.313755 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322595 (min) 0.383636 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728528e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313823 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318101 (min) 0.361118 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -3.528175905097174e-20 <- latitude -> 8.989621936418957e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963989894899185e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4921 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219766085e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 79 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 79 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 79 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 79 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313716 (min) 0.313881 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318121 (min) 0.361318 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819735e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313811 (min) 0.314064 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31475 (min) 0.337656 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835828e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313761 (min) 0.313981 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314834 (min) 0.337594 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332513e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313751 (min) 0.313761 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313813 (min) 0.314435 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -3.736159801311123e-20 <- latitude -> 8.990394628965167e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797134886555672e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402885e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 87 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 87 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 87 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313855 (min) 0.31355 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313872 (min) 0.313106 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.114454340996767e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313968 (min) 0.314152 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315222 (min) 0.33936 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.097069329017604e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313947 (min) 0.314128 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315218 (min) 0.339363 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.094896202520912e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313833 (min) 0.314145 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318157 (min) 0.36323 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -3.9708685381655115e-20 <- latitude -> 8.990175167715562e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975734239913762e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617948072e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 91 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 91 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 91 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.314136 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318323 (min) 0.353036 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878421e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.314083 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323058 (min) 0.383239 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.181821262413263e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.314036 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323003 (min) 0.384293 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.188340641905191e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313826 (min) 0.3141 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328663 (min) 0.405 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -4.210369257229098e-20 <- latitude -> 8.989241816761253e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976855097945148e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332846e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31405 (min) 0.314144 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328659 (min) 0.402313 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677122e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313741 (min) 0.313698 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33501 (min) 0.420603 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798023e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313718 (min) 0.313853 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334881 (min) 0.419939 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295302e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313688 (min) 0.314116 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341019 (min) 0.435021 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -4.2522069421420105e-20 <- latitude -> 8.987808120046748e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797392156926897e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231025e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.314131 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340852 (min) 0.436849 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680088e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.314145 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346151 (min) 0.450363 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712244e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314143 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346233 (min) 0.44956 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209568e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313999 (min) 0.314142 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350398 (min) 0.458562 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:33 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:33 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:33 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:33 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:33 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:33 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:33 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:33 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:33 DEBUG opendrift.models.basemodel:2054: -3.962325909152475e-20 <- latitude -> 8.985981484039053e-06
20:14:33 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964610954056805e-05
20:14:33 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:33 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026663976e-12 degrees.
20:14:33 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:33 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:33 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:33 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313665 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350304 (min) 0.460585 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:33 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:33 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:33 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:33 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:33 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:33 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:33 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:33 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:33 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:33 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:33 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621125e-12 degrees.
20:14:33 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:33 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:33 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:33 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:33 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313849 (min) 0.313628 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352858 (min) 0.46711 (max)
20:14:33 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:33 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642568e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313793 (min) 0.313676 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352658 (min) 0.466406 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163721e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313795 (min) 0.313743 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353541 (min) 0.468184 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: -3.217451069092804e-20 <- latitude -> 8.983728322448785e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7943703906907806e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:34 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:34 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:34 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313997 (min) 0.313956 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353749 (min) 0.468821 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107683e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314044 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352779 (min) 0.468032 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134586e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.314079 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352718 (min) 0.467801 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129114e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.314019 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35023 (min) 0.461998 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: -2.0818558712854728e-20 <- latitude -> 8.986350946444513e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795024521099285e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080246e-12 degrees.
20:14:34 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:34 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:34 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314035 (min) 0.3141 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350345 (min) 0.462487 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551434e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.314104 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346104 (min) 0.452533 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567505e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314114 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346144 (min) 0.452474 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567505e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314055 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340698 (min) 0.439621 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: -7.276475350328566e-21 <- latitude -> 8.989048089968288e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964333319737994e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546082e-12 degrees.
20:14:34 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:34 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:34 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313897 (min) 0.314101 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340582 (min) 0.439579 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043413e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313842 (min) 0.313875 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334431 (min) 0.424379 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048773e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313824 (min) 0.31399 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334512 (min) 0.424342 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048775e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.314017 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328474 (min) 0.405631 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.989977866517777e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797317279011113e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546111e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313988 (min) 0.313847 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328065 (min) 0.404183 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054163e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.31394 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322682 (min) 0.384568 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556847e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.313959 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3227 (min) 0.384513 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562204e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314012 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31805 (min) 0.361859 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.98954768184466e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797666228658526e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075624e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314131 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317917 (min) 0.361581 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589043e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31387 (min) 0.313817 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315069 (min) 0.338146 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091728e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313997 (min) 0.313803 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315122 (min) 0.33813 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594407e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31397 (min) 0.314027 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314115 (min) 0.314397 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.988785704010577e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976770686481625e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011319e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313858 (min) 0.314133 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313862 (min) 0.314623 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118466e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.314104 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315199 (min) 0.33878 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129184e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.314092 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315197 (min) 0.338295 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626508e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.314085 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31819 (min) 0.362136 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990082987816455e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980308578883705e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621164e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.313928 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318241 (min) 0.362805 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621191e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313958 (min) 0.314133 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32261 (min) 0.384557 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123818e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313919 (min) 0.314127 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322822 (min) 0.385198 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123821e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.313868 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328391 (min) 0.406069 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990308524751146e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982165696211727e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118474e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.313884 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328617 (min) 0.406634 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118485e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.314153 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334767 (min) 0.423627 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621167e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.314155 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334911 (min) 0.422693 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621165e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314147 (min) 0.314085 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340857 (min) 0.438541 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.989865262394936e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7983194220467624e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621183e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313955 (min) 0.314001 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340809 (min) 0.440961 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631911e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.314129 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346273 (min) 0.451428 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631914e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314064 (min) 0.314158 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346321 (min) 0.450374 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631916e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314017 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350226 (min) 0.45955 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990131036064239e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7983795708569242e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139968e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.314091 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350387 (min) 0.463159 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:34 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:34 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:34 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648024e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314032 (min) 0.314015 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352846 (min) 0.469012 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150704e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314002 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353015 (min) 0.46889 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647377e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314114 (min) 0.314056 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353895 (min) 0.470755 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:34 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:34 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:34 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:34 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:34 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:34 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:34 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:34 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:34 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990840830792127e-06
20:14:34 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798416468866272e-05
20:14:34 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:34 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139871e-12 degrees.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:34 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:34 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:34 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:34 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:34 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:34 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:34 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:34 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:34 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:34 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:34 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313999 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353725 (min) 0.470885 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:34 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:34 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:34 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:34 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:34 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:35 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626434e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31407 (min) 0.314121 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353028 (min) 0.468665 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129161e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.314131 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353004 (min) 0.468459 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129113e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314093 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350246 (min) 0.462676 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:35 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:35 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:35 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:35 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:35 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:07.500000
20:14:35 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:35 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:35 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:35 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:35 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:35 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:35 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:35 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:35 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:35 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:35 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:35 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:35 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:35 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:35 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:35 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:35 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:35 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:35 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:35 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:35 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:19.500000 to 2000-01-01 00:00:07.500000)
20:14:35 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:35 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:35 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:35 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:35 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:35 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:35 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:35 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:35 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:35 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:35 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:35 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:35 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:35 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:35 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.31414 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31834 (min) 0.363627 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:35 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:35 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:35 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31396 (min) 0.314156 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323091 (min) 0.38619 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621128e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314152 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323062 (min) 0.386312 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621125e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.314053 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328726 (min) 0.407239 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:35 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:35 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:35 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:35 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:35 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:35 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:35 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:35 DEBUG opendrift.models.basemodel:2054: -3.6917653338912486e-20 <- latitude -> 8.888218129192535e-06
20:14:35 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.786508819092506e-05
20:14:35 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:35 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605059e-12 degrees.
20:14:35 DEBUG opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
20:14:35 DEBUG opendrift.models.basemodel.environment:767: Data missing for 17 elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 17 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 17 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:35 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314092 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328785 (min) 0.407245 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:35 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:35 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:35 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102392e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313844 (min) 0.31402 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334949 (min) 0.42582 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107754e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313808 (min) 0.314044 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335017 (min) 0.425858 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107752e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314067 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34108 (min) 0.441745 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:35 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:35 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:35 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:35 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:35 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:35 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:35 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:35 DEBUG opendrift.models.basemodel:2054: -2.9447375682816123e-20 <- latitude -> 8.933049402613193e-06
20:14:35 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.789891307257404e-05
20:14:35 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:35 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
20:14:35 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:14:35 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:35 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314016 (min) 0.314101 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340768 (min) 0.441665 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:35 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:35 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:35 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455660981e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.314127 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345964 (min) 0.45302 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615819e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313916 (min) 0.314139 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346233 (min) 0.454075 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615818e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313769 (min) 0.314088 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350198 (min) 0.463379 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:35 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:35 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:35 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:35 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:35 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:35 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:35 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:35 DEBUG opendrift.models.basemodel:2054: -2.4198008114203143e-20 <- latitude -> 8.959356274974082e-06
20:14:35 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7920187921455023e-05
20:14:35 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:35 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4980 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118511e-12 degrees.
20:14:35 DEBUG opendrift.readers.basereader.variables:829: Masking 20 elements outside coverage
20:14:35 DEBUG opendrift.models.basemodel.environment:767: Data missing for 20 elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 20 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 20 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:35 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313778 (min) 0.314136 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350494 (min) 0.461037 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:35 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:35 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:35 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.314052 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352946 (min) 0.46783 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129243e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.314084 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3527 (min) 0.468896 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.314017 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353644 (min) 0.470708 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:35 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:35 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:35 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:35 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:35 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:35 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:35 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:35 DEBUG opendrift.models.basemodel:2054: -2.1228073626367513e-20 <- latitude -> 8.974196432026582e-06
20:14:35 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7934973982568156e-05
20:14:35 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:35 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4978 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637296e-12 degrees.
20:14:35 DEBUG opendrift.readers.basereader.variables:829: Masking 22 elements outside coverage
20:14:35 DEBUG opendrift.models.basemodel.environment:767: Data missing for 22 elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 22 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 22 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:35 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.313637 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353789 (min) 0.467972 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:35 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:35 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:35 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:35 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:35 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:35 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145353e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.314079 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352947 (min) 0.465258 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648032e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.314049 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352837 (min) 0.464235 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150714e-12 degrees.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313955 (min) 0.313704 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350238 (min) 0.458498 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:35 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:35 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:35 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:35 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:35 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:35 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:35 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:35 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:35 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:35 DEBUG opendrift.models.basemodel:2054: -2.209198827342351e-20 <- latitude -> 8.982256048352061e-06
20:14:35 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7946368873478817e-05
20:14:35 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:35 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664125e-12 degrees.
20:14:35 DEBUG opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
20:14:35 DEBUG opendrift.models.basemodel.environment:767: Data missing for 26 elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:35 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:35 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:35 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:35 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:35 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:35 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:35 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:35 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 26 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 26 elements
20:14:35 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:35 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:35 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313868 (min) 0.313421 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350192 (min) 0.46072 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:35 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674869e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3139 (min) 0.314098 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345742 (min) 0.452352 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680231e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313879 (min) 0.314135 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345655 (min) 0.452119 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177554e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.31382 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340688 (min) 0.439273 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -2.4613372121645685e-20 <- latitude -> 8.986766860764851e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955843354568316e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199016e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 41 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 41 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 41 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313546 (min) 0.314083 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340199 (min) 0.438842 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728521e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313459 (min) 0.314049 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334059 (min) 0.42276 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231214e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313499 (min) 0.313987 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334008 (min) 0.422593 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236567e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313539 (min) 0.314147 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328369 (min) 0.404056 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -2.993120383444301e-20 <- latitude -> 8.9893702478893e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963865006685475e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4929 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268122e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 71 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 71 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 71 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 71 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314158 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328252 (min) 0.40414 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311683e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313448 (min) 0.313951 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322502 (min) 0.383962 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436825096e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31355 (min) 0.313881 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322472 (min) 0.383854 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436825094e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.31415 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31795 (min) 0.361297 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.682462786180163e-20 <- latitude -> 8.990919749918408e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970299101904288e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4915 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033376063e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 85 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 85 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 85 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 85 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313756 (min) 0.314102 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31797 (min) 0.361216 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617947862e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313673 (min) 0.314096 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315063 (min) 0.337137 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.136185605969946e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313639 (min) 0.314151 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315004 (min) 0.337329 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.134012479472628e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313935 (min) 0.314067 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313998 (min) 0.313874 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.2540043819689864e-20 <- latitude -> 8.99185390483152e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974747081156335e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.118800593991004e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 91 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 91 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 91 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.314135 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314113 (min) 0.313084 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.166609376932035e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.314018 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314943 (min) 0.333112 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.144878111958833e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.313903 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314963 (min) 0.33245 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.14705123845616e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.314109 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318091 (min) 0.353751 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.579145756859422e-20 <- latitude -> 8.992396233125008e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797674368064164e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386479e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313811 (min) 0.314144 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318366 (min) 0.36293 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824787e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.314035 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322848 (min) 0.382871 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918856985e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.313957 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322962 (min) 0.382416 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348912e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313865 (min) 0.314088 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32848 (min) 0.402467 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.875225995977175e-20 <- latitude -> 8.992672795315983e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797559366609639e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284598e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.313879 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32872 (min) 0.402846 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728313e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313635 (min) 0.313821 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334924 (min) 0.421771 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257792e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313676 (min) 0.313945 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334941 (min) 0.421126 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252434e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.314126 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340974 (min) 0.436406 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.977270062166446e-20 <- latitude -> 8.992768593419992e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796966361272857e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35567138219882e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.313915 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340974 (min) 0.437999 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155971e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313985 (min) 0.313943 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346266 (min) 0.451447 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118277e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.314041 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346204 (min) 0.451141 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674735e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314026 (min) 0.314159 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35051 (min) 0.460213 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.7149765760554815e-20 <- latitude -> 8.992745918036112e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955209259412844e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642526e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.314147 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350446 (min) 0.461102 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610235e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.313933 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352879 (min) 0.467428 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621109e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314068 (min) 0.313881 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353023 (min) 0.467438 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711843e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314025 (min) 0.313759 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353903 (min) 0.469226 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -3.0028614291570355e-20 <- latitude -> 8.99264517055583e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7937102922477335e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858897e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.313845 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353801 (min) 0.468916 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:36 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:36 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:36 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583634e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.313755 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352676 (min) 0.466118 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091678e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.313706 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352864 (min) 0.466985 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091683e-12 degrees.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.31395 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350234 (min) 0.461212 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:36 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:36 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:36 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:36 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:36 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:36 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:36 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:36 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:36 DEBUG opendrift.models.basemodel:2054: -1.9252342363527313e-20 <- latitude -> 8.992804359755996e-06
20:14:36 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7956647342839935e-05
20:14:36 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:36 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594386e-12 degrees.
20:14:36 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:36 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:36 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:36 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:36 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:36 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:36 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:36 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:36 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:36 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:36 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:36 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:36 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314144 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35025 (min) 0.461248 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:36 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:36 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:36 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:36 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:36 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113082e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313975 (min) 0.314139 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345915 (min) 0.452639 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631943e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314144 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345926 (min) 0.452586 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129161e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.313974 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340254 (min) 0.439714 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: -6.178191842395173e-21 <- latitude -> 8.992961529977289e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796882306600799e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599676e-12 degrees.
20:14:37 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:37 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:37 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.314065 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339987 (min) 0.440144 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080934e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.313974 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.333956 (min) 0.423365 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097013e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313876 (min) 0.314008 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.333829 (min) 0.423212 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097013e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31386 (min) 0.313777 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3281 (min) 0.404616 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993009932091567e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797501874532125e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572877e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.314096 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328466 (min) 0.403342 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556808e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313694 (min) 0.314141 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322717 (min) 0.383055 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070208e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313831 (min) 0.314134 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322673 (min) 0.383063 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064852e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314033 (min) 0.314047 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317965 (min) 0.360603 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992972141639244e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979372833440324e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.314111 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318147 (min) 0.36182 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043398e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.314063 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315085 (min) 0.337996 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048756e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.31405 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315086 (min) 0.337928 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551436e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.314052 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313771 (min) 0.314503 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992856365415493e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980809315224565e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.313723 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314154 (min) 0.314399 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540734e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314026 (min) 0.313825 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314921 (min) 0.338767 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043414e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313955 (min) 0.313796 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315076 (min) 0.338382 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546095e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314061 (min) 0.314122 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317852 (min) 0.362115 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992716427077337e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980710659173782e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043384e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.313776 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318073 (min) 0.361698 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032669e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.313844 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32286 (min) 0.384395 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529992e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313859 (min) 0.313825 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322909 (min) 0.385306 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032669e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.314112 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328689 (min) 0.406241 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992695907320964e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979697244298622e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027311e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31403 (min) 0.313992 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328593 (min) 0.406413 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524634e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313941 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334686 (min) 0.42444 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529995e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.314031 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33488 (min) 0.424903 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802666e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313981 (min) 0.314043 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340718 (min) 0.440771 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992564710889796e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978675986605596e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519278e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313933 (min) 0.314054 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340492 (min) 0.440265 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49909773102196e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314013 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346294 (min) 0.453388 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021959e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314047 (min) 0.314095 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346335 (min) 0.453716 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524636e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.313977 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350377 (min) 0.463041 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:37 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:37 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:37 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:37 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992357177306386e-06
20:14:37 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979840700064253e-05
20:14:37 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:37 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519283e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:37 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31405 (min) 0.314079 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350353 (min) 0.463022 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:37 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:37 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:37 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021964e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.313891 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352987 (min) 0.468934 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519291e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.314056 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353048 (min) 0.468743 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021968e-12 degrees.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314011 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353842 (min) 0.470606 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:37 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:37 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:37 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:37 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:37 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:37 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:37 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:37 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:37 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:37 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:37 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:37 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:37 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:37 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:37 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:37 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:37 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:37 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:37 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:37 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:38 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:08
20:14:38 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:38 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:38 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:38 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:38 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:38 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:38 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:38 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:38 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:38 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:38 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:38 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:38 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:38 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:38 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:38 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:38 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:38 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:38 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:38 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:38 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:20 to 2000-01-01 00:00:08)
20:14:38 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:38 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:38 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:38 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:38 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:38 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314157 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314155 (min) 0.31516 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661041e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.314107 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315172 (min) 0.33969 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118448e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.314095 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31518 (min) 0.339659 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118451e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.314118 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318337 (min) 0.363574 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -4.5471472522404856e-20 <- latitude -> 8.88670794911032e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7874254008950953e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4980 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605064e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 20 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 20 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 20 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 20 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314013 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318213 (min) 0.363614 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605078e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.314013 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322881 (min) 0.386133 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107762e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314039 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322973 (min) 0.386329 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107764e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313868 (min) 0.314142 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32875 (min) 0.407256 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -3.767037405972553e-20 <- latitude -> 8.93062974628554e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7910604773716007e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4978 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610457e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 22 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 22 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 22 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 22 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.313981 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328808 (min) 0.407252 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118512e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.314101 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334971 (min) 0.424724 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621191e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.314093 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335066 (min) 0.425583 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621193e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314018 (min) 0.314064 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34078 (min) 0.441471 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -3.0397751171926555e-20 <- latitude -> 8.957011752418704e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.793157468668128e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129248e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 21 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 21 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 21 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.314151 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341062 (min) 0.440697 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637304e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.313749 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346374 (min) 0.454295 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139986e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313972 (min) 0.313734 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346379 (min) 0.453772 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637307e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313541 (min) 0.314146 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350422 (min) 0.463064 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -2.317379140630761e-20 <- latitude -> 8.972753966465302e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7944726644424088e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653402e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.314153 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350421 (min) 0.461012 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773668854e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311953 (min) 0.313879 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35307 (min) 0.469132 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773668854e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311614 (min) 0.313852 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353088 (min) 0.468646 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37740264717218e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311523 (min) 0.313958 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353974 (min) 0.470448 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -2.2447276415173603e-20 <- latitude -> 8.981899964638629e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795382703343518e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014684959e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 17 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 17 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 17 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314088 (min) 0.314037 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353817 (min) 0.464502 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002707062e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31367 (min) 0.313486 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352746 (min) 0.46851 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712423e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313497 (min) 0.313334 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352834 (min) 0.468195 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749711778e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313553 (min) 0.313536 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350144 (min) 0.462341 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -1.923140390512809e-20 <- latitude -> 8.986960579977888e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796078955069554e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231214e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 21 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 21 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 21 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313478 (min) 0.313838 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350185 (min) 0.460994 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313522 (min) 0.313899 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346101 (min) 0.451527 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771442e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313493 (min) 0.314033 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346076 (min) 0.451247 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326876e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313437 (min) 0.313967 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34049 (min) 0.438472 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -2.2433970271509962e-20 <- latitude -> 8.989683896463659e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7966501960168655e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300955e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 40 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 40 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 40 elements
20:14:38 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:38 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313878 (min) 0.313988 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340497 (min) 0.438705 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:38 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:38 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:38 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:38 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:38 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:38 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840557e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.313791 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334554 (min) 0.422539 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851285e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314096 (min) 0.313997 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334582 (min) 0.422611 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2296300453546e-12 degrees.
20:14:38 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:38 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:38 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313995 (min) 0.314148 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328367 (min) 0.40406 (max)
20:14:38 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:38 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:38 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:38 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:38 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:38 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:38 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:38 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:38 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:38 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:38 DEBUG opendrift.models.basemodel:2054: -2.6898719966936044e-20 <- latitude -> 8.991022604573997e-06
20:14:38 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797120423935492e-05
20:14:38 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:38 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4921 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.192686894900207e-12 degrees.
20:14:38 DEBUG opendrift.readers.basereader.variables:829: Masking 79 elements outside coverage
20:14:38 DEBUG opendrift.models.basemodel.environment:767: Data missing for 79 elements.
20:14:38 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:38 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:38 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:38 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:38 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:38 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:38 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 79 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 79 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313778 (min) 0.31342 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328281 (min) 0.404716 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.140531858964585e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31388 (min) 0.313963 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322723 (min) 0.38317 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.12531997348335e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313814 (min) 0.313809 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322708 (min) 0.383047 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.123146846986037e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313587 (min) 0.314074 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31775 (min) 0.36062 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -2.742853081303683e-20 <- latitude -> 8.991455340501333e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797471725429966e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4910 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.123146846985698e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 90 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 90 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 90 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 90 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313641 (min) 0.314002 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317226 (min) 0.361532 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617948149e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313918 (min) 0.314015 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314971 (min) 0.337272 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.140531858964213e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313911 (min) 0.314121 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314952 (min) 0.337451 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.138358732466866e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.314124 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313863 (min) 0.313066 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -3.0111186338776083e-20 <- latitude -> 8.991213924587686e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976605897479218e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.179648135915977e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313689 (min) 0.314159 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314043 (min) 0.313111 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867705e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314044 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315087 (min) 0.338551 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386467e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.314131 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315024 (min) 0.338368 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.20572565388379e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313945 (min) 0.314114 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318297 (min) 0.361712 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -3.410960054054438e-20 <- latitude -> 8.990437420026209e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797618150579991e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830167e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31398 (min) 0.314121 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318292 (min) 0.361235 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279262e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.31403 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323014 (min) 0.383362 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808742e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314019 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322984 (min) 0.383131 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300705e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31388 (min) 0.313915 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32859 (min) 0.403339 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -3.7348599298691565e-20 <- latitude -> 8.989857622121372e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797212920397878e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744377e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313904 (min) 0.313477 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328502 (min) 0.404003 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696174e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314066 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334811 (min) 0.422706 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220293e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314031 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334646 (min) 0.422582 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220298e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.313744 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340975 (min) 0.438038 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -3.859486138434918e-20 <- latitude -> 8.990669101348641e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796162190552424e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669353e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.314153 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339385 (min) 0.438891 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163722e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.314095 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34546 (min) 0.452293 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155982e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313958 (min) 0.314046 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345738 (min) 0.451666 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653305e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314015 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350066 (min) 0.460806 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -3.611061376212408e-20 <- latitude -> 8.99170360664222e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7938597484892216e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626448e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313865 (min) 0.314118 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349928 (min) 0.461914 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086263e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313955 (min) 0.313869 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352405 (min) 0.466557 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610381e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313995 (min) 0.3139 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3526 (min) 0.465856 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102345e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.313938 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353271 (min) 0.46772 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -2.924145364069869e-20 <- latitude -> 8.992226021256883e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79459066657851e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572884e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313631 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353944 (min) 0.469117 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567539e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313706 (min) 0.31379 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353044 (min) 0.467825 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578265e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313736 (min) 0.313864 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353035 (min) 0.467289 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313948 (min) 0.313937 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350237 (min) 0.461499 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -1.868227048219225e-20 <- latitude -> 8.992352155611402e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796220313023868e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572924e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.313664 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35024 (min) 0.462462 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583668e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.314112 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345699 (min) 0.452981 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097075e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314106 (min) 0.314098 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345785 (min) 0.452722 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599755e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314014 (min) 0.314121 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340551 (min) 0.439835 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: -5.783738231481867e-21 <- latitude -> 8.992079987395687e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971857437848422e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594304e-12 degrees.
20:14:39 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:39 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.313912 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34075 (min) 0.439794 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:39 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:39 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:39 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070195e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.313974 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334554 (min) 0.422334 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583592e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.314016 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334573 (min) 0.422883 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080915e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.314112 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328358 (min) 0.404239 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:39 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:39 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:39 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:39 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:39 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:39 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:39 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:39 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:39 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991614103908642e-06
20:14:39 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976309596203e-05
20:14:39 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:39 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064852e-12 degrees.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:39 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:39 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:39 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:39 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:39 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:39 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:39 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:39 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:39 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:39 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:39 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314075 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328064 (min) 0.405389 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:39 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:39 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:39 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:39 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:39 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:40 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005951e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.31382 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322384 (min) 0.384245 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070224e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.313811 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322322 (min) 0.384271 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567549e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313937 (min) 0.314081 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317689 (min) 0.361584 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:40 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:40 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:40 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:40 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:40 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:40 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:40 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:40 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992049827358464e-06
20:14:40 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980593266952756e-05
20:14:40 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:40 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757292e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:40 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31408 (min) 0.314132 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31814 (min) 0.361182 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:40 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:40 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:40 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158366e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.313914 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31498 (min) 0.33818 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583663e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.31388 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314983 (min) 0.3382 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583663e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313926 (min) 0.314075 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313138 (min) 0.314623 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:40 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:40 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:40 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:40 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:40 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:40 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:40 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:40 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992027697811668e-06
20:14:40 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982320684971692e-05
20:14:40 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:40 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:40 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314085 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31358 (min) 0.314542 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:40 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:40 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:40 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059461e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314101 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315157 (min) 0.339114 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567497e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.314093 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315072 (min) 0.339143 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567495e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313901 (min) 0.313606 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317974 (min) 0.363033 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:40 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:40 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:40 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:40 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:40 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:40 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:40 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:40 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991654502763399e-06
20:14:40 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982800199733198e-05
20:14:40 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:40 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551425e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:40 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314099 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318261 (min) 0.362557 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:40 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:40 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:40 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043389e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313839 (min) 0.313807 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322732 (min) 0.385505 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546067e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.313877 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3227 (min) 0.385125 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546066e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313962 (min) 0.314155 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328727 (min) 0.40598 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:40 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:40 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:40 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:40 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:40 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:40 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:40 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:40 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.991017470490114e-06
20:14:40 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798260188427432e-05
20:14:40 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:40 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:40 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313759 (min) 0.314081 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328523 (min) 0.406193 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:40 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:40 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:40 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032675e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314046 (min) 0.31386 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334918 (min) 0.425023 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038036e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.31387 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33496 (min) 0.424828 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535357e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313902 (min) 0.313961 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339957 (min) 0.440686 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:40 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:40 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:40 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:40 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:40 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:40 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:40 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:40 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.990295531412466e-06
20:14:40 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798200126580133e-05
20:14:40 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:40 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535357e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:40 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.314091 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340078 (min) 0.439563 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:40 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:40 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:40 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:40 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524646e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313981 (min) 0.314079 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346294 (min) 0.453528 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027328e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314018 (min) 0.314086 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346216 (min) 0.453288 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032685e-12 degrees.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.313707 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350349 (min) 0.462586 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:40 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:40 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:40 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:40 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:40 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:40 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:40 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:40 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:40 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:40 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:40 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:40 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:40 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:40 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:40 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:40 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:40 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:40 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:40 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:40 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:40 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:08.500000
20:14:40 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:40 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:40 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:40 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:40 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:40 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:40 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:40 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:40 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:40 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:40 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:40 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:40 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:40 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:40 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:40 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:40 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:40 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:40 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:40 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:40 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:20.500000 to 2000-01-01 00:00:08.500000)
20:14:40 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:40 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:40 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:40 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:40 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:41 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:41 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314059 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317928 (min) 0.359831 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107733e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.314125 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315099 (min) 0.336532 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615772e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.314108 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315091 (min) 0.336444 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314145 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314151 (min) 0.315085 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -5.306771897488783e-20 <- latitude -> 8.886640273542638e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7883380740029553e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4976 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960507e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 24 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 24 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 24 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 24 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.314039 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313889 (min) 0.315159 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605088e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313827 (min) 0.314052 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315147 (min) 0.339609 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556609801e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.314078 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314988 (min) 0.339564 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113129e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313934 (min) 0.314102 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31835 (min) 0.363476 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -4.546270993245136e-20 <- latitude -> 8.929487090436316e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7921987161321287e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4975 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361583e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 25 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 25 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 25 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 25 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.313943 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318296 (min) 0.363337 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626568e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313922 (min) 0.314158 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322913 (min) 0.386252 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129253e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313995 (min) 0.314156 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32272 (min) 0.385896 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129252e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.314159 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32872 (min) 0.406805 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -3.74415974847826e-20 <- latitude -> 8.955100391402892e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7942644123538773e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 23 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 23 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 23 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314035 (min) 0.31386 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328509 (min) 0.405985 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166815e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314024 (min) 0.314004 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33501 (min) 0.425652 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166817e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.31404 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335039 (min) 0.425119 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166815e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313603 (min) 0.314153 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341036 (min) 0.440989 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -2.865851102278055e-20 <- latitude -> 8.970841772665477e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7954490634132458e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888187636e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313421 (min) 0.314083 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340913 (min) 0.437142 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712425e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313777 (min) 0.314124 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346358 (min) 0.446163 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34480574971178e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313548 (min) 0.314128 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346203 (min) 0.446379 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712425e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313197 (min) 0.314034 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350218 (min) 0.455834 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -2.2780755555936557e-20 <- latitude -> 8.980561361275847e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7961849988590017e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4985 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733896e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 15 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 15 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 15 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 15 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31351 (min) 0.313974 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350212 (min) 0.459447 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219766083e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.313741 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353134 (min) 0.461347 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268762e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.313737 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353059 (min) 0.461353 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966770804e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313927 (min) 0.313718 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353911 (min) 0.463435 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -2.041449514295197e-20 <- latitude -> 8.986208519436306e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796686569016933e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300952e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 12 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 12 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 12 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313543 (min) 0.31365 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353675 (min) 0.469335 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057333145e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313695 (min) 0.314137 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352865 (min) 0.466405 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183829834e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313695 (min) 0.314124 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352817 (min) 0.465821 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24701505733315e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313639 (min) 0.314098 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350131 (min) 0.460031 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -2.0569061426922376e-20 <- latitude -> 8.989337956704734e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970607563394457e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4985 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21007190687874e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 15 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 15 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 15 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 15 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.313864 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349943 (min) 0.460531 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.173128756424344e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313678 (min) 0.314042 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345971 (min) 0.451184 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.16878250342971e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313686 (min) 0.314098 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346036 (min) 0.451116 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.170955629927031e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313885 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340522 (min) 0.438344 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:41 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:41 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:41 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:41 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:41 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:41 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:41 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:41 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:41 DEBUG opendrift.models.basemodel:2054: -1.8443864154749993e-20 <- latitude -> 8.991039366590399e-06
20:14:41 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973535251931047e-05
20:14:41 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:41 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4964 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.1405318589643e-12 degrees.
20:14:41 DEBUG opendrift.readers.basereader.variables:829: Masking 36 elements outside coverage
20:14:41 DEBUG opendrift.models.basemodel.environment:767: Data missing for 36 elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 36 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 36 elements
20:14:41 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:41 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313826 (min) 0.313875 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340517 (min) 0.438236 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:41 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:41 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:41 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:41 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:41 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:41 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.149224364953528e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31379 (min) 0.314056 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334329 (min) 0.423052 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.142704985460945e-12 degrees.
20:14:41 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:41 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:41 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:41 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313849 (min) 0.314035 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334358 (min) 0.423059 (max)
20:14:41 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:41 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:41 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:41 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:41 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:41 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.142704985461596e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31395 (min) 0.313978 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327906 (min) 0.404465 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -2.3714451427169467e-20 <- latitude -> 8.991909831277573e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975696580451567e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4914 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.157916870942813e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 86 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 86 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 86 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 86 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313671 (min) 0.31368 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328247 (min) 0.403019 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418673e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314049 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322716 (min) 0.38417 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.164436250434781e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314016 (min) 0.31414 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322701 (min) 0.384103 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.16443625043476e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313934 (min) 0.313543 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318025 (min) 0.361471 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -2.4862942205913873e-20 <- latitude -> 8.99225247907864e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976818382557805e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.192686894899916e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 94 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 94 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 94 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314156 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318022 (min) 0.361586 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370403e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313843 (min) 0.314148 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315128 (min) 0.337826 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386517e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313798 (min) 0.314117 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315143 (min) 0.337784 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2078987803811e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314068 (min) 0.31394 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314077 (min) 0.314597 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -2.8373462236699596e-20 <- latitude -> 8.992217930198127e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976305201370726e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840916e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314027 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314011 (min) 0.314441 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808128e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313912 (min) 0.314062 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314516 (min) 0.338407 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824813e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313884 (min) 0.313986 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314784 (min) 0.338207 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824818e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313991 (min) 0.313671 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318314 (min) 0.36151 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -3.270694441628009e-20 <- latitude -> 8.99189282374356e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973028914175503e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776581e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314088 (min) 0.31413 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318281 (min) 0.361591 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739062e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.3141 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322918 (min) 0.384259 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760504e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.31411 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322954 (min) 0.383863 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755147e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313968 (min) 0.31409 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32862 (min) 0.404275 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -3.6349179975167544e-20 <- latitude -> 8.99182551859317e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964714269957518e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209576e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313949 (min) 0.314054 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328583 (min) 0.404632 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669358e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.314085 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334857 (min) 0.423811 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690793e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.314115 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334954 (min) 0.423349 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188116e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313964 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340913 (min) 0.438942 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -3.770084968922349e-20 <- latitude -> 8.992376484655339e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794656706916359e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150625e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.314126 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340844 (min) 0.438415 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615738e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313852 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346132 (min) 0.451394 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637173e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314125 (min) 0.313771 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346098 (min) 0.45118 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134494e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314126 (min) 0.31408 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35049 (min) 0.460406 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -3.554574574598845e-20 <- latitude -> 8.99264899141808e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.793283587515614e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096999e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313718 (min) 0.314111 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350509 (min) 0.462137 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578259e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.314147 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353136 (min) 0.466053 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594344e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314027 (min) 0.314157 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353048 (min) 0.465656 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588983e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31406 (min) 0.31415 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353955 (min) 0.46746 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -2.881847886472222e-20 <- latitude -> 8.992752007550808e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7954016764959563e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583644e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314096 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353671 (min) 0.469785 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091712e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.314093 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352862 (min) 0.467688 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610478e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313952 (min) 0.314078 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352914 (min) 0.467271 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107802e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313824 (min) 0.314159 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350344 (min) 0.461483 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:42 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:42 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:42 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:42 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:42 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:42 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:42 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:42 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:42 DEBUG opendrift.models.basemodel:2054: -1.83104137249858e-20 <- latitude -> 8.992754993930223e-06
20:14:42 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967140881699064e-05
20:14:42 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:42 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559431e-12 degrees.
20:14:42 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:42 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:42 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:42 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.313892 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350269 (min) 0.462724 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:42 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:42 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:42 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:42 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:42 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:42 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:42 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070208e-12 degrees.
20:14:42 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:42 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:42 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:42 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.313976 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345963 (min) 0.453254 (max)
20:14:42 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:42 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:42 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:42 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:42 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:42 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:42 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583608e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.313944 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346009 (min) 0.453137 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158361e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313941 (min) 0.314114 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340687 (min) 0.440247 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:43 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:43 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:43 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:43 DEBUG opendrift.models.basemodel:2054: -5.5415722923947926e-21 <- latitude -> 8.992692458229457e-06
20:14:43 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973560410500394e-05
20:14:43 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:43 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572911e-12 degrees.
20:14:43 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:43 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:43 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:43 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:43 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31407 (min) 0.314011 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340642 (min) 0.440678 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:43 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:43 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:43 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655678e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.314001 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334655 (min) 0.424145 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070176e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.313987 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334636 (min) 0.424089 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567497e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313891 (min) 0.314094 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328461 (min) 0.405364 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:43 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:43 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:43 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:43 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992568339095685e-06
20:14:43 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979223999460248e-05
20:14:43 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:43 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48171271904339e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:43 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314118 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328442 (min) 0.404857 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:43 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:43 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:43 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535357e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.313925 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322717 (min) 0.384118 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540715e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314019 (min) 0.313906 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322697 (min) 0.38414 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038036e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.313707 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318057 (min) 0.361482 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:43 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:43 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:43 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:43 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992353311904274e-06
20:14:43 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79811544946205e-05
20:14:43 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:43 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49257835153001e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:43 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313843 (min) 0.313752 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318044 (min) 0.361696 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:43 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:43 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:43 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032693e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.313871 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315053 (min) 0.337912 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038054e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.31385 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315051 (min) 0.337859 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032693e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.313968 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314159 (min) 0.314628 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:43 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:43 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:43 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:43 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992478049631644e-06
20:14:43 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981150188994714e-05
20:14:43 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:43 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032703e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:43 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.31386 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313776 (min) 0.314567 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:43 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:43 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:43 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043432e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314047 (min) 0.313576 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315102 (min) 0.339173 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540753e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.313556 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315032 (min) 0.339126 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540757e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313754 (min) 0.314133 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318197 (min) 0.363033 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:43 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:43 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:43 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:43 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99269706956287e-06
20:14:43 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979935665718104e-05
20:14:43 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:43 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048804e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:43 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314011 (min) 0.313903 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318128 (min) 0.3623 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:43 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:43 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:43 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064896e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314053 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322862 (min) 0.385133 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562214e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314022 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322838 (min) 0.384834 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064896e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.314019 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328646 (min) 0.405586 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:43 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:43 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:43 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:43 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992867779680328e-06
20:14:43 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798133122148488e-05
20:14:43 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:43 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567542e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:43 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313899 (min) 0.313993 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328592 (min) 0.405999 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:43 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:43 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:43 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064875e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313629 (min) 0.314093 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334778 (min) 0.424272 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313685 (min) 0.314053 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334697 (min) 0.424933 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.314075 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340693 (min) 0.440817 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:43 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:43 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:43 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:43 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:43 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:43 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:43 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:43 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:43 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:43 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:43 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:43 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:43 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:43 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:43 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:43 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:43 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:43 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:43 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:43 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:43 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:09
20:14:43 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:43 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:43 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:43 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:43 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:43 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:43 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:43 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:43 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:43 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:43 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:43 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:43 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:43 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:43 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:43 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:43 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:43 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:43 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:43 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:43 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:21 to 2000-01-01 00:00:09)
20:14:43 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:43 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:43 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:43 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:43 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:44 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:44 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.314087 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328262 (min) 0.402485 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314003 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322554 (min) 0.38233 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314073 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322557 (min) 0.381992 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615777e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314147 (min) 0.31401 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317928 (min) 0.359813 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -5.873238894978038e-20 <- latitude -> 8.888024620024215e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7891613696020602e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4972 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4339039361024e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 28 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 28 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 28 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 28 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.314113 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317941 (min) 0.360309 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605098e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.313995 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314919 (min) 0.336843 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615822e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.313968 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314988 (min) 0.336865 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177117853e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314102 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314017 (min) 0.315126 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -5.294030430595241e-20 <- latitude -> 8.930203327038414e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7931897283672695e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4972 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 28 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 28 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 28 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 28 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313927 (min) 0.314094 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314093 (min) 0.31516 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313775 (min) 0.313982 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315075 (min) 0.339255 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648033e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313991 (min) 0.314019 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315019 (min) 0.339624 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648037e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.314062 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318174 (min) 0.363539 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -4.598624414480917e-20 <- latitude -> 8.954823854378082e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7952015735764383e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4975 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172184e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 25 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 25 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 25 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 25 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.314148 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318255 (min) 0.363626 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701695e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.314153 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322881 (min) 0.386175 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204379e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314156 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322965 (min) 0.386327 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701698e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.314008 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328772 (min) 0.407254 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -3.713209265262447e-20 <- latitude -> 8.969822601566282e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7962656187728213e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4980 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236572e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 20 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 20 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 20 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 20 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313823 (min) 0.31406 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328704 (min) 0.404755 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776814e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.313607 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335001 (min) 0.422908 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776814e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.313776 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335073 (min) 0.424563 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279493e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313714 (min) 0.31393 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341064 (min) 0.440447 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -2.9832700834063483e-20 <- latitude -> 8.97932619373149e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968630103582295e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26222694281437e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 13 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 13 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 13 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313434 (min) 0.313392 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34109 (min) 0.434732 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918857289e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312658 (min) 0.3141 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346351 (min) 0.448911 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359971e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312574 (min) 0.314118 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346328 (min) 0.447567 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22311066586265e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313017 (min) 0.3138 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350335 (min) 0.456774 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -2.537353640544857e-20 <- latitude -> 8.985000956421868e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972208810554652e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.188340641905567e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.31341 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350365 (min) 0.455699 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.179648135916061e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313565 (min) 0.314151 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35285 (min) 0.467066 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.17312875642412e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313486 (min) 0.314157 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352953 (min) 0.466438 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.1731287564241e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313562 (min) 0.314137 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353673 (min) 0.468162 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -1.857316135255164e-20 <- latitude -> 8.988572316568138e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974502205238215e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418738e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 8 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 8 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 8 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313936 (min) 0.314018 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35399 (min) 0.467602 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910692e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.313819 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352923 (min) 0.465676 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418735e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.313859 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35286 (min) 0.46538 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.17747500941871e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313876 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350073 (min) 0.459601 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:44 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:44 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:44 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:44 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:44 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:44 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:44 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:44 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:44 DEBUG opendrift.models.basemodel:2054: -2.1105748339895052e-20 <- latitude -> 8.990391502263051e-06
20:14:44 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976028564987617e-05
20:14:44 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:44 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.1883406419053e-12 degrees.
20:14:44 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:14:44 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:14:44 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:44 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313916 (min) 0.313989 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350269 (min) 0.459979 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:44 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:44 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:44 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:44 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:44 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:44 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.194860021397221e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313769 (min) 0.313699 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345953 (min) 0.451188 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:44 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402609e-12 degrees.
20:14:44 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:44 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:44 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:44 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31374 (min) 0.313699 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345951 (min) 0.450632 (max)
20:14:44 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:44 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:44 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:44 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:44 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.188340641905288e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314001 (min) 0.314003 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340592 (min) 0.437878 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -2.5510047991864663e-20 <- latitude -> 8.991026480738123e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797694105640486e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4970 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386516e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 30 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 30 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 30 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 30 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313931 (min) 0.313733 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340635 (min) 0.438528 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873117e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.314146 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334171 (min) 0.422485 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878455e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314116 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334112 (min) 0.422199 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381165e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313452 (min) 0.314151 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328432 (min) 0.403709 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -2.0196407021558976e-20 <- latitude -> 8.990689198597015e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977097634509968e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359706e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 92 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 92 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 92 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313784 (min) 0.314087 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3284 (min) 0.404754 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343606e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314075 (min) 0.313963 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322694 (min) 0.384291 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.23180317185165e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.314096 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322719 (min) 0.384235 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851655e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313911 (min) 0.314119 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317966 (min) 0.361572 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -2.263079419286847e-20 <- latitude -> 8.989372413712253e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797603157615436e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383022e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 96 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 96 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 96 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.313926 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31798 (min) 0.36128 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300078e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314099 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31502 (min) 0.337256 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942813481e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.313994 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315026 (min) 0.337441 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819481e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313853 (min) 0.314078 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314135 (min) 0.314393 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -2.6848558161660533e-20 <- latitude -> 8.990716415749595e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972782714189788e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284645e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313854 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313861 (min) 0.314321 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252455e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.313934 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315198 (min) 0.338623 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268532e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.313825 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315235 (min) 0.338377 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771216e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314078 (min) 0.313903 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318142 (min) 0.361839 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -3.1646822695105144e-20 <- latitude -> 8.99125178730672e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7965438601926596e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225653e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.313902 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317795 (min) 0.362312 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204201e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314049 (min) 0.313581 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322674 (min) 0.38418 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717601e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.313696 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322834 (min) 0.384537 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220281e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313986 (min) 0.314066 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328788 (min) 0.405132 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -3.565856567720969e-20 <- latitude -> 8.991277889448995e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950047296543634e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177381e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.31394 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328649 (min) 0.40566 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642571e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314152 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334963 (min) 0.42426 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664007e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314132 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335022 (min) 0.424309 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161332e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314106 (min) 0.313878 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340904 (min) 0.440016 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -3.708899373152964e-20 <- latitude -> 8.991700916393605e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7924696748731765e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637241e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.314023 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341057 (min) 0.43995 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313617 (min) 0.314142 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346339 (min) 0.452384 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118419e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313833 (min) 0.314115 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34627 (min) 0.452517 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610381e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31333 (min) 0.313635 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350431 (min) 0.461702 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -3.49562266774897e-20 <- latitude -> 8.99164889692523e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7944769240011963e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313572 (min) 0.314156 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350534 (min) 0.461928 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567537e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.31366 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352906 (min) 0.468386 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583618e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313647 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352809 (min) 0.468568 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583621e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.31367 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353643 (min) 0.470384 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -2.8477179585004947e-20 <- latitude -> 8.990901519545344e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7960344016104473e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578281e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314085 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353972 (min) 0.4702 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:45 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:45 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:45 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:45 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:45 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:45 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086345e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.314085 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353037 (min) 0.466401 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097071e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.314068 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35297 (min) 0.465825 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599753e-12 degrees.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314143 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350286 (min) 0.460077 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:45 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:45 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:45 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:45 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:45 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:45 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:45 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:45 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:45 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:45 DEBUG opendrift.models.basemodel:2054: -1.806121594671543e-20 <- latitude -> 8.990123963187756e-06
20:14:45 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797059891498368e-05
20:14:45 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:45 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45128894808093e-12 degrees.
20:14:45 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:45 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:45 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:45 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:45 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:45 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:45 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:45 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:45 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:45 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:45 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:45 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:45 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314059 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349821 (min) 0.461774 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:45 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:46 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:46 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:46 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313559 (min) 0.313947 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346141 (min) 0.453365 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086311e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313665 (min) 0.314061 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346139 (min) 0.45327 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583636e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314078 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340657 (min) 0.440369 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:46 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:46 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:46 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:46 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:46 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:46 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:46 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:46 DEBUG opendrift.models.basemodel:2054: -5.339462603531002e-21 <- latitude -> 8.990381513142987e-06
20:14:46 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975549871335734e-05
20:14:46 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:46 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508633e-12 degrees.
20:14:46 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:46 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:46 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:46 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:46 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314057 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34055 (min) 0.440285 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:46 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:46 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:46 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080921e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.31415 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334618 (min) 0.424646 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314125 (min) 0.314145 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334658 (min) 0.424626 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594325e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.31415 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328001 (min) 0.40587 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:46 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:46 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:46 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:46 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:46 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:46 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:46 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:46 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.989819537919495e-06
20:14:46 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798044179322457e-05
20:14:46 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:46 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567489e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:46 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314006 (min) 0.313723 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32847 (min) 0.404709 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:46 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:46 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:46 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48171271904338e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313419 (min) 0.314037 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322642 (min) 0.384205 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054097e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313259 (min) 0.313993 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322629 (min) 0.384172 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551417e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.313834 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318072 (min) 0.361585 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:46 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:46 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:46 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:46 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:46 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:46 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:46 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:46 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.98855812603679e-06
20:14:46 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798219238107833e-05
20:14:46 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:46 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535346e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:46 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314041 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318006 (min) 0.36096 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:46 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:46 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:46 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452463e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313591 (min) 0.314063 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315045 (min) 0.338139 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529992e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313627 (min) 0.314046 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315103 (min) 0.338083 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032667e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.313796 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314116 (min) 0.314568 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:46 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:46 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:46 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:46 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:46 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:46 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:46 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:46 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.988509935850366e-06
20:14:46 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982353949090284e-05
20:14:46 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:46 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021952e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:46 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.314036 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313923 (min) 0.314049 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:46 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:46 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:46 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016598e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.313843 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315245 (min) 0.338931 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519277e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314023 (min) 0.313864 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31525 (min) 0.339061 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016598e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.314131 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318112 (min) 0.36288 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:46 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:46 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:46 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:46 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:46 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:46 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:46 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:46 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.987061642907539e-06
20:14:46 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981553284005924e-05
20:14:46 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:46 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.50127085751928e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:46 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.313959 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318244 (min) 0.362235 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:46 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:46 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:46 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016605e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.313974 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322933 (min) 0.384525 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016605e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.313997 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322876 (min) 0.38414 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519283e-12 degrees.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313771 (min) 0.314007 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328696 (min) 0.404703 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:46 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:46 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:46 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:46 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:46 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:46 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:46 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:46 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:46 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:46 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:46 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:46 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:46 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:46 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:46 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:46 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:46 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:46 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:46 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:46 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:46 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:09.500000
20:14:46 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:46 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:46 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:46 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:46 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:46 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:46 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:46 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:46 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:46 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:46 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:46 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:46 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:46 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:46 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:46 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:46 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:46 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:46 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:46 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:46 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:21.500000 to 2000-01-01 00:00:09.500000)
20:14:46 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:46 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:46 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:46 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:46 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:47 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:47 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314136 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340608 (min) 0.436385 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314058 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334572 (min) 0.421257 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118456e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.31399 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334555 (min) 0.420664 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118457e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.314042 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328243 (min) 0.402391 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -6.391760066194745e-20 <- latitude -> 8.890252051630076e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7898311175835208e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599723e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 31 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 31 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 31 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.314107 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328306 (min) 0.403357 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610465e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.313782 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322681 (min) 0.382965 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41651892412387e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.313886 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322671 (min) 0.382842 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123873e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.314054 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31797 (min) 0.360437 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -5.891748954813312e-20 <- latitude -> 8.932497874110388e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7939725938235857e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4968 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134617e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 32 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 32 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 32 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 32 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.313855 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317725 (min) 0.360992 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658125e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.314079 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31513 (min) 0.337379 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172177e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.314111 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315112 (min) 0.337396 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669502e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.31414 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314087 (min) 0.315157 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -5.3068216162787503e-20 <- latitude -> 8.956178007956957e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795914914129214e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4971 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199016e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 29 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 29 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 29 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 29 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314158 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31414 (min) 0.31502 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.316555105247303e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31399 (min) 0.31407 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315265 (min) 0.339524 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252672e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31386 (min) 0.314094 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315246 (min) 0.339144 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31003572575535e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313832 (min) 0.313932 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318256 (min) 0.36303 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -4.4935672843328164e-20 <- latitude -> 8.970317059602655e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968643393834586e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.27309257530096e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 23 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 23 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 23 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313555 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318159 (min) 0.363564 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22311066586265e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3128 (min) 0.313869 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323002 (min) 0.384015 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365333e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312568 (min) 0.31386 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323085 (min) 0.384642 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412868015e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.313839 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328863 (min) 0.405526 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -3.6366813433407405e-20 <- latitude -> 8.979025018503267e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973433891077058e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381212e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 16 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 16 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 16 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312228 (min) 0.312647 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328728 (min) 0.405237 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375814e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313832 (min) 0.313941 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33488 (min) 0.4161 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.199206274391935e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313639 (min) 0.31393 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33498 (min) 0.419783 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.201379400889235e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31314 (min) 0.314067 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34108 (min) 0.435662 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -2.893442007472878e-20 <- latitude -> 8.984646311391815e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975875612443022e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375825e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 11 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 11 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 11 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313748 (min) 0.313146 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34093 (min) 0.436768 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867774e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.314057 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346299 (min) 0.442777 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375812e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313987 (min) 0.313989 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346335 (min) 0.44604 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873132e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313911 (min) 0.314068 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350558 (min) 0.455486 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -2.2880735948070922e-20 <- latitude -> 8.987425340195723e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977074181874267e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862394e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313804 (min) 0.313956 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350325 (min) 0.460701 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:47 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:47 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:47 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045353722e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.313752 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352714 (min) 0.465309 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918857039e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.313739 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352703 (min) 0.464433 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918857039e-12 degrees.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.313702 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353429 (min) 0.466112 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:47 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:47 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:47 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:47 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:47 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:47 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:47 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:47 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:47 DEBUG opendrift.models.basemodel:2054: -2.018173893400642e-20 <- latitude -> 8.988955710432e-06
20:14:47 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977539702837255e-05
20:14:47 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:47 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348996e-12 degrees.
20:14:47 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:14:47 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:47 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:47 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:47 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:47 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:47 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:47 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:47 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:47 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:14:47 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:47 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:47 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.313906 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353205 (min) 0.467215 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:47 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:47 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:47 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:47 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:47 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433825e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314092 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352335 (min) 0.466125 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433825e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.314153 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352451 (min) 0.465498 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840929e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314137 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350146 (min) 0.45972 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -1.38861211531948e-20 <- latitude -> 8.989013048508874e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977441336817915e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830232e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 8 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 8 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 8 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313936 (min) 0.314143 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350248 (min) 0.460812 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819478e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3139 (min) 0.314081 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34604 (min) 0.451346 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.255707563322192e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313948 (min) 0.314084 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345998 (min) 0.450836 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824236e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313681 (min) 0.314047 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340529 (min) 0.43806 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -1.8524402912348558e-20 <- latitude -> 8.987863942410405e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797668469696881e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4978 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311437e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 22 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 22 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 22 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 22 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313868 (min) 0.314056 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340694 (min) 0.439249 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798034e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314102 (min) 0.314039 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334147 (min) 0.42129 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306073e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.31403 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334133 (min) 0.421724 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306078e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313873 (min) 0.314029 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328428 (min) 0.403207 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -1.851946967195438e-20 <- latitude -> 8.98814584663386e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797488155949305e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787343e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 95 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 95 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 95 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313984 (min) 0.313929 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328338 (min) 0.404069 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677126e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313844 (min) 0.314004 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322586 (min) 0.382447 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279271e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313821 (min) 0.313938 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322525 (min) 0.382711 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279273e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.314012 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317892 (min) 0.360164 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -2.1441828182822124e-20 <- latitude -> 8.989839631466616e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971195817021263e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263183e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313792 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318066 (min) 0.361054 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744419e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314154 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314949 (min) 0.337639 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252462e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.31412 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315002 (min) 0.337555 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755144e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313998 (min) 0.313902 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314159 (min) 0.314554 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -2.623749729515729e-20 <- latitude -> 8.991216029388203e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963956199804622e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225655e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.314138 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314105 (min) 0.314678 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706883e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313835 (min) 0.313938 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315101 (min) 0.338978 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243723009e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313893 (min) 0.314008 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315014 (min) 0.338947 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243722367e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313945 (min) 0.313938 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318269 (min) 0.362563 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -3.1188297496916876e-20 <- latitude -> 8.991992358653412e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7949758086861647e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690841e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.313954 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318151 (min) 0.36256 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166699e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.314097 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322917 (min) 0.384647 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680104e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314115 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322779 (min) 0.384578 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182787e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313958 (min) 0.313778 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328689 (min) 0.405126 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -3.522046654559857e-20 <- latitude -> 8.992359336078306e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.792617338076485e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145235e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313857 (min) 0.314064 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328706 (min) 0.40603 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123823e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314061 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334947 (min) 0.422789 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139256e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314022 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334931 (min) 0.42392 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139903e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313717 (min) 0.313744 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340918 (min) 0.4397 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -3.6902442430802784e-20 <- latitude -> 8.992447733935459e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794196461102278e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118407e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.314143 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341005 (min) 0.440803 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858894e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.313776 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346233 (min) 0.452488 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314067 (min) 0.313742 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346132 (min) 0.451584 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102342e-12 degrees.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.313703 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350263 (min) 0.460841 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:48 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:48 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:48 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:48 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:48 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:48 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:48 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:48 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:48 DEBUG opendrift.models.basemodel:2054: -3.470043709012845e-20 <- latitude -> 8.992352825599814e-06
20:14:48 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955487545839702e-05
20:14:48 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:48 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070197e-12 degrees.
20:14:48 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:48 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:48 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:48 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:48 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:48 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:48 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.314154 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350245 (min) 0.462216 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:48 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:48 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:48 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:48 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:48 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:48 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:48 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:48 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:48 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:48 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:48 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:48 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:48 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:48 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059495e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313975 (min) 0.314111 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353072 (min) 0.465675 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070216e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313938 (min) 0.314042 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352974 (min) 0.467082 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567539e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313947 (min) 0.314005 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353918 (min) 0.468938 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:49 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:49 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:49 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:49 DEBUG opendrift.models.basemodel:2054: -2.828537023395369e-20 <- latitude -> 8.992133734028174e-06
20:14:49 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7966030386767982e-05
20:14:49 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:49 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567554e-12 degrees.
20:14:49 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:49 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:49 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:49 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:49 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314 (min) 0.314015 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353972 (min) 0.469773 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:49 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:49 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:49 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757294e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314096 (min) 0.314084 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352899 (min) 0.466462 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508634e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.31409 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352988 (min) 0.46769 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086345e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314104 (min) 0.314083 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350334 (min) 0.461903 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:49 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:49 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:49 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:49 DEBUG opendrift.models.basemodel:2054: -1.7926585564723835e-20 <- latitude -> 8.992070599195621e-06
20:14:49 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973682145784024e-05
20:14:49 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:49 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567531e-12 degrees.
20:14:49 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:49 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:49 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:49 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:49 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.314 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350347 (min) 0.462304 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:49 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:49 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:49 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059516e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313935 (min) 0.314157 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345986 (min) 0.451858 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.314159 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345867 (min) 0.452511 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075595e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314105 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340524 (min) 0.439641 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:49 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:49 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:49 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:49 DEBUG opendrift.models.basemodel:2054: -5.252313688936848e-21 <- latitude -> 8.992517719865989e-06
20:14:49 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977073440082175e-05
20:14:49 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:49 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46650083356218e-12 degrees.
20:14:49 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:49 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:49 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:49 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:49 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31394 (min) 0.313997 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340697 (min) 0.440326 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:49 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:49 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:49 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562198e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313992 (min) 0.31351 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334701 (min) 0.424453 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45998145407024e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313933 (min) 0.313591 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334697 (min) 0.424374 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4556352010756e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314127 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328307 (min) 0.405651 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:49 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:49 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:49 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:49 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992775299928158e-06
20:14:49 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798142089797742e-05
20:14:49 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:49 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:49 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313988 (min) 0.314055 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328245 (min) 0.405108 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:49 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:49 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:49 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551436e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31413 (min) 0.313976 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322599 (min) 0.384822 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305412e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.313981 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322535 (min) 0.384851 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305412e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314012 (min) 0.314153 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318029 (min) 0.362082 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:49 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:49 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:49 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:49 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.992931990798592e-06
20:14:49 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798308561423629e-05
20:14:49 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:49 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546088e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:49 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.314018 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318068 (min) 0.362031 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:49 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:49 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:49 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546098e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.314069 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314972 (min) 0.337487 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4795395925461e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314068 (min) 0.314084 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314979 (min) 0.337348 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4795395925461e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314148 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314021 (min) 0.3145 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:49 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:49 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:49 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:49 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993032009704444e-06
20:14:49 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7983444714551148e-05
20:14:49 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:49 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546111e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:49 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.314058 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313791 (min) 0.313975 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:49 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:49 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:49 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054162e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.313962 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31506 (min) 0.338907 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059522e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31403 (min) 0.313938 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31516 (min) 0.338857 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556193e-12 degrees.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313707 (min) 0.313993 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318167 (min) 0.362575 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:49 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:49 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:49 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:49 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:49 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:49 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:49 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:49 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:49 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:49 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:49 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:49 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:49 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:49 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:49 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:49 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:49 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:49 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:49 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:49 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:49 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:10
20:14:49 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:49 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:49 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:49 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:49 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:49 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:49 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:49 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:49 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:49 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:49 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:49 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:49 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:49 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:49 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:49 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:49 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:49 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:49 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:49 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:49 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:22 to 2000-01-01 00:00:10)
20:14:49 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:49 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:49 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:49 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:49 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:50 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:50 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314159 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350291 (min) 0.458265 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.313951 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345933 (min) 0.449484 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123817e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.313969 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345921 (min) 0.44896 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361578e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314154 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340534 (min) 0.436321 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -6.788773210860659e-20 <- latitude -> 8.892433883295251e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7903038880988653e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 33 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 33 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 33 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.313869 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340539 (min) 0.437421 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615834e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314133 (min) 0.314157 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334269 (min) 0.422718 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626555e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314154 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334329 (min) 0.42241 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626563e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313836 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32821 (min) 0.403887 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -6.314386719283566e-20 <- latitude -> 8.935102932852547e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945282768565648e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4964 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39913391214535e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 36 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 36 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 36 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 36 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314143 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328328 (min) 0.404565 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37305639417755e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313884 (min) 0.313761 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32265 (min) 0.383983 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36653701468561e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313864 (min) 0.313771 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322665 (min) 0.383909 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635192998e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314054 (min) 0.314096 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31805 (min) 0.361267 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -5.848318256472788e-20 <- latitude -> 8.958530445642256e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964087758676126e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864230568e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 33 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 33 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 33 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313724 (min) 0.313942 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318072 (min) 0.359758 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828294954e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.313747 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315107 (min) 0.335938 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306322e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.313725 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31508 (min) 0.335886 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311683e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314018 (min) 0.314004 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313965 (min) 0.314989 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -5.261408386619772e-20 <- latitude -> 8.971783877002643e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972594247479376e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22745691885711e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 26 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 26 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 26 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.313961 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314021 (min) 0.314447 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851725e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313945 (min) 0.313361 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315097 (min) 0.339702 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370466e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31409 (min) 0.313344 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315124 (min) 0.339533 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21659128637049e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313614 (min) 0.314136 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318177 (min) 0.363441 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -4.416845332117533e-20 <- latitude -> 8.979538257881134e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976360277621744e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354387e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313563 (min) 0.31385 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318402 (min) 0.361542 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835596e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313347 (min) 0.314102 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323081 (min) 0.382063 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348996e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313067 (min) 0.314093 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322975 (min) 0.3839 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348994e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312769 (min) 0.313441 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328875 (min) 0.404765 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -3.538509281254543e-20 <- latitude -> 8.984772393990282e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797779392273688e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383022e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 12 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 12 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 12 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313471 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328656 (min) 0.400411 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316854e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313442 (min) 0.313224 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33504 (min) 0.424741 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327514e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313462 (min) 0.313156 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335013 (min) 0.423911 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383025e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313651 (min) 0.313242 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340766 (min) 0.439753 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -2.6016251788274534e-20 <- latitude -> 8.987290464935425e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977991395904387e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311434e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.31401 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340573 (min) 0.427393 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798029e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.313977 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346246 (min) 0.454056 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808112e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.313989 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346045 (min) 0.453423 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803419e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.313827 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35036 (min) 0.462712 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -2.3138583734570898e-20 <- latitude -> 8.989649209834324e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977462104397615e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.279611954792688e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313982 (min) 0.314126 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350465 (min) 0.458583 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284671e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313535 (min) 0.314065 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353038 (min) 0.464899 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778732e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313489 (min) 0.314052 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352836 (min) 0.464109 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778732e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313625 (min) 0.314059 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353753 (min) 0.465774 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -1.933866593576289e-20 <- latitude -> 8.990796898707376e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976385453370528e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29482384027327e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313818 (min) 0.313972 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353309 (min) 0.467288 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:50 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:50 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:50 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:50 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:50 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:50 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268566e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313828 (min) 0.314033 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352109 (min) 0.466283 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326857e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313729 (min) 0.314009 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.351828 (min) 0.465486 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326857e-12 degrees.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:50 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313747 (min) 0.313963 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349846 (min) 0.459713 (max)
20:14:50 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:50 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:50 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:50 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:50 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:50 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:50 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:50 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:50 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:50 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:50 DEBUG opendrift.models.basemodel:2054: -1.860271687525955e-20 <- latitude -> 8.990962564299331e-06
20:14:50 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974679514427055e-05
20:14:50 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:50 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760553e-12 degrees.
20:14:50 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:14:50 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:50 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:50 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:50 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:50 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:50 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:50 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:50 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:50 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:14:50 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:50 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313569 (min) 0.314034 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350206 (min) 0.460061 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755174e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.314158 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345851 (min) 0.451594 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755176e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314048 (min) 0.314121 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345966 (min) 0.451189 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31003572575514e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314117 (min) 0.313969 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34069 (min) 0.43842 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -1.5579179573941163e-20 <- latitude -> 8.990076334684774e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971974362974013e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744442e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 17 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 17 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 17 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31406 (min) 0.314045 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340695 (min) 0.439319 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236422e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.314062 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334386 (min) 0.423937 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241784e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.314143 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334309 (min) 0.423876 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739066e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313597 (min) 0.313887 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328371 (min) 0.405184 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -1.6585017643386474e-20 <- latitude -> 8.990773804566271e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967476463574577e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225687e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 97 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 97 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 97 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.314139 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328161 (min) 0.40496 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214953e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.314015 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322558 (min) 0.383967 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717635e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314115 (min) 0.31403 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32263 (min) 0.383859 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717637e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.313978 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318063 (min) 0.361307 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -2.0336243859140733e-20 <- latitude -> 8.991764920588386e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795962779493829e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706938e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.314009 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318128 (min) 0.361524 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519352e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.31415 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315118 (min) 0.337536 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198885e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314093 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315142 (min) 0.337603 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701566e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.313907 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313681 (min) 0.314588 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -2.5418384592340316e-20 <- latitude -> 8.992228190700174e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945328870174052e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182787e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31393 (min) 0.314003 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313952 (min) 0.314644 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664004e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.314134 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315165 (min) 0.339129 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680083e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314087 (min) 0.314158 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315112 (min) 0.339157 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680086e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.314023 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318352 (min) 0.36288 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -3.067983304144187e-20 <- latitude -> 8.992327930282312e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7932917442916102e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.313897 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317421 (min) 0.362582 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637204e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.314115 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32288 (min) 0.38488 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647923e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.314048 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322843 (min) 0.385074 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150604e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313981 (min) 0.314101 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328378 (min) 0.405771 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -3.4898569300863206e-20 <- latitude -> 8.992171056727129e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945143062543866e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41217267112919e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313906 (min) 0.314086 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328789 (min) 0.405221 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4295576831077e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.314061 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334901 (min) 0.423558 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621099e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.314078 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334841 (min) 0.42311 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615742e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313964 (min) 0.314133 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340687 (min) 0.438934 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -3.654732272294334e-20 <- latitude -> 8.991838533741784e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795564841065664e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091638e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314136 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341055 (min) 0.439086 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572897e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313968 (min) 0.313961 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346242 (min) 0.452582 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588974e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314001 (min) 0.314053 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346284 (min) 0.453105 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4469426950863e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313684 (min) 0.314106 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350463 (min) 0.462349 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -3.442850387015773e-20 <- latitude -> 8.991756150879631e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964173036543938e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080959e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.31414 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350361 (min) 0.461712 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086345e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314027 (min) 0.314012 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353138 (min) 0.46747 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102429e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314004 (min) 0.314079 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353053 (min) 0.467972 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599753e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.314081 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353953 (min) 0.469804 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -2.808185051185035e-20 <- latitude -> 8.9922222756941e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970865888116764e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091664e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.314129 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353941 (min) 0.468855 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.313997 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352648 (min) 0.467629 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43825018909697e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.313966 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352754 (min) 0.467857 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091609e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313917 (min) 0.31399 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350213 (min) 0.462059 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:51 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:51 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:51 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:51 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:51 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:51 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:51 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:51 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:51 DEBUG opendrift.models.basemodel:2054: -1.77839136196845e-20 <- latitude -> 8.992610808786997e-06
20:14:51 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975648053656833e-05
20:14:51 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:51 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054103e-12 degrees.
20:14:51 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:51 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:51 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:51 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314025 (min) 0.314015 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350206 (min) 0.462954 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:51 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:51 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:51 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:51 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:51 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:51 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540713e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314049 (min) 0.313695 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346152 (min) 0.453604 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:51 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546074e-12 degrees.
20:14:51 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:51 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:51 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:51 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313899 (min) 0.3137 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346126 (min) 0.453526 (max)
20:14:51 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:51 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:51 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:51 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:51 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:51 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043395e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313987 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340254 (min) 0.440602 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:52 DEBUG opendrift.models.basemodel:2054: -5.160018841978699e-21 <- latitude -> 8.992876132750243e-06
20:14:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798016155517068e-05
20:14:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038042e-12 degrees.
20:14:52 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.313944 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340511 (min) 0.440014 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.314 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334516 (min) 0.422028 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038054e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31397 (min) 0.313938 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334482 (min) 0.42266 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038054e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.31415 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327811 (min) 0.404035 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:52 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993011078884124e-06
20:14:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981966281704027e-05
20:14:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540749e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.313943 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32845 (min) 0.405408 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054162e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313745 (min) 0.313721 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322715 (min) 0.384468 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551486e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313945 (min) 0.313775 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322697 (min) 0.384406 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054166e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.314101 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317971 (min) 0.361772 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:52 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.993062813965469e-06
20:14:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981765217829785e-05
20:14:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567583e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314122 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318136 (min) 0.362011 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080968e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.313985 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314588 (min) 0.337953 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086366e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.313981 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314624 (min) 0.337905 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589046e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314095 (min) 0.314042 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314089 (min) 0.314249 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:52 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:10.500000
20:14:52 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:52 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:52 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:52 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:52 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:52 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:52 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:52 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:52 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:52 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:52 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:52 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:52 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:52 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:52 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:52 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:52 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:52 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:52 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:52 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:52 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:22.500000 to 2000-01-01 00:00:10.500000)
20:14:52 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:52 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:52 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:52 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:52 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:52 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:52 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:52 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.31407 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3538 (min) 0.46603 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599698e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.314156 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352749 (min) 0.464641 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.314139 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352748 (min) 0.464046 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062114e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314153 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350159 (min) 0.458265 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:52 DEBUG opendrift.models.basemodel:2054: -7.0093500961135e-20 <- latitude -> 8.893763331288943e-06
20:14:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.790553513306972e-05
20:14:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
20:14:52 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:14:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:14:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:14:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313644 (min) 0.313993 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350122 (min) 0.459762 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615839e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.314092 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345915 (min) 0.450942 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40999954463192e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.314153 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345905 (min) 0.450922 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631927e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.313839 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340587 (min) 0.438114 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:52 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:52 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:52 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:52 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:52 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:52 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:52 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:52 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:52 DEBUG opendrift.models.basemodel:2054: -6.521896202981702e-20 <- latitude -> 8.937341604417568e-06
20:14:52 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7948602481896836e-05
20:14:52 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:52 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39478765915072e-12 degrees.
20:14:52 DEBUG opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
20:14:52 DEBUG opendrift.models.basemodel.environment:767: Data missing for 38 elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 38 elements
20:14:52 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 38 elements
20:14:52 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:52 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314009 (min) 0.314091 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340271 (min) 0.438427 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:52 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:52 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:52 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:52 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:52 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:52 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:52 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:52 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:52 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:52 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:52 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685611e-12 degrees.
20:14:52 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:52 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:52 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:52 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:52 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313869 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334211 (min) 0.422026 (max)
20:14:52 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:52 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34915200270706e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.313844 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334322 (min) 0.422023 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209744e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328239 (min) 0.403399 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -6.352769170566035e-20 <- latitude -> 8.960821438378876e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796713282387434e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 37 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 37 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 37 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314105 (min) 0.313796 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328366 (min) 0.405176 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830292e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.313975 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322421 (min) 0.384316 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045353974e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.313984 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322496 (min) 0.384287 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22528379235997e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313842 (min) 0.313991 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317911 (min) 0.361542 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -5.862246409774035e-20 <- latitude -> 8.973559455218372e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797495267090673e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343684e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 31 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 31 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 31 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.313974 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31784 (min) 0.358944 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824861e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.313796 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314978 (min) 0.337169 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354363e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.313749 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314949 (min) 0.337098 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846327e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313462 (min) 0.314004 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314129 (min) 0.314828 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -5.207517048731764e-20 <- latitude -> 8.98087343850362e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977884513790977e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819496e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 23 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 23 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 23 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313587 (min) 0.312997 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314033 (min) 0.315116 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798077e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314131 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315234 (min) 0.338849 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316833e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.314134 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315208 (min) 0.338221 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814122e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312619 (min) 0.312886 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318338 (min) 0.362053 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -4.318452028936474e-20 <- latitude -> 8.985462205739527e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797835297439939e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290007e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 14 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 14 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 14 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.3129 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318344 (min) 0.360577 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268573e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313064 (min) 0.31413 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323058 (min) 0.383893 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290007e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313288 (min) 0.314126 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322965 (min) 0.382941 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787327e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.313502 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328566 (min) 0.403725 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -3.7713948777106196e-20 <- latitude -> 8.988197447307933e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977425581514878e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219765888e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 9 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 9 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 9 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313683 (min) 0.314003 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328577 (min) 0.407198 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755195e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.313957 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33459 (min) 0.411213 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263236e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314052 (min) 0.313941 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334872 (min) 0.408771 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263235e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314062 (min) 0.313969 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340872 (min) 0.422267 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -2.683737750880212e-20 <- latitude -> 8.989254746649268e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7975637580740767e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744425e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.313883 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340872 (min) 0.441521 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236407e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.313887 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346306 (min) 0.449021 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241764e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.313861 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34643 (min) 0.447991 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241118e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313735 (min) 0.313903 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350267 (min) 0.456766 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -2.1511567960747237e-20 <- latitude -> 8.989214607507488e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973231708597644e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728347e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313849 (min) 0.314145 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350471 (min) 0.458304 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220323e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313639 (min) 0.314127 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35303 (min) 0.464771 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728364e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313677 (min) 0.314051 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352815 (min) 0.46444 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728363e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313737 (min) 0.314089 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35377 (min) 0.466118 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -1.2170571201104338e-20 <- latitude -> 8.988460024663449e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970178855239432e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717619e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313859 (min) 0.314042 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353579 (min) 0.467679 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209594e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.313815 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352455 (min) 0.46684 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214955e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314066 (min) 0.313882 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352695 (min) 0.466244 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214955e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314015 (min) 0.314055 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350187 (min) 0.460448 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -1.8601839459780076e-20 <- latitude -> 8.987156221374452e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796612340955231e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204251e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313584 (min) 0.313757 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349105 (min) 0.461547 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198861e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.31393 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346096 (min) 0.450073 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701543e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313906 (min) 0.313994 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346089 (min) 0.449769 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204222e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31402 (min) 0.314116 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340659 (min) 0.436993 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:53 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:53 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:53 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:53 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:53 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:53 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:53 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:53 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:53 DEBUG opendrift.models.basemodel:2054: -1.3197943560599058e-20 <- latitude -> 8.989705990686035e-06
20:14:53 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796025327447934e-05
20:14:53 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:53 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519352e-12 degrees.
20:14:53 DEBUG opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
20:14:53 DEBUG opendrift.models.basemodel.environment:767: Data missing for 13 elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 13 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 13 elements
20:14:53 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:53 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.313982 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340701 (min) 0.439163 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:53 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:53 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:53 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:53 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:53 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:53 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188179e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313987 (min) 0.314081 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334269 (min) 0.423366 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:53 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:53 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:53 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:53 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:53 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:53 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690809e-12 degrees.
20:14:53 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:53 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:53 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:53 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:53 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313976 (min) 0.314089 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334218 (min) 0.423157 (max)
20:14:53 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690812e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314007 (min) 0.314018 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328364 (min) 0.404576 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -1.5129091169756484e-20 <- latitude -> 8.990865052301567e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950998970155538e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674751e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 98 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 98 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 98 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.313934 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328138 (min) 0.40406 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172092e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313974 (min) 0.313909 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322393 (min) 0.383508 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768013e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313973 (min) 0.314017 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322362 (min) 0.383329 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680131e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31376 (min) 0.314158 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317795 (min) 0.360903 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -1.9350397690072718e-20 <- latitude -> 8.991034931363211e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7935346539577192e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658663e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313757 (min) 0.314117 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318125 (min) 0.360693 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532652673e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313971 (min) 0.314114 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314559 (min) 0.337659 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658682e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313954 (min) 0.31415 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314701 (min) 0.337696 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156005e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314015 (min) 0.313746 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314134 (min) 0.314786 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -2.4946450244854134e-20 <- latitude -> 8.990414164176808e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7940951397707728e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642572e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314065 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313963 (min) 0.314816 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129195e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314021 (min) 0.314125 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315176 (min) 0.338787 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513992e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314035 (min) 0.314148 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315124 (min) 0.339084 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139918e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313941 (min) 0.314069 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318302 (min) 0.362838 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -3.033039283212376e-20 <- latitude -> 8.990869047613518e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950041538472917e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626476e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.313534 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318211 (min) 0.361745 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605059e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.313871 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322805 (min) 0.384844 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.31376 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322984 (min) 0.384311 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313857 (min) 0.314021 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328634 (min) 0.404903 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -3.469327162647456e-20 <- latitude -> 8.991650903416494e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7958275937291188e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107764e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.31412 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32864 (min) 0.406161 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588292e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.31408 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334964 (min) 0.425125 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605019e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314125 (min) 0.314043 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335013 (min) 0.424552 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599661e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.314149 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341067 (min) 0.440394 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -3.6283578697402174e-20 <- latitude -> 8.992078340346838e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7965142714787238e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572877e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31397 (min) 0.314122 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340908 (min) 0.439883 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562175e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313341 (min) 0.31408 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346325 (min) 0.452762 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070215e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313306 (min) 0.314079 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346346 (min) 0.451952 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070218e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313731 (min) 0.314065 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350357 (min) 0.461176 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -3.4354263413667234e-20 <- latitude -> 8.992166337363528e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7971120254437367e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.313996 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350261 (min) 0.462697 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075617e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.31398 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353062 (min) 0.468892 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589022e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314154 (min) 0.313985 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353077 (min) 0.468635 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858902e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314151 (min) 0.313994 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353888 (min) 0.470457 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -2.793132305648897e-20 <- latitude -> 8.991814792377097e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797539878982119e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610245e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.314045 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35393 (min) 0.470448 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572853e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313932 (min) 0.313972 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353029 (min) 0.468561 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091607e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313892 (min) 0.314025 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353036 (min) 0.468193 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508625e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313623 (min) 0.314091 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350315 (min) 0.462377 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -1.7678502916241675e-20 <- latitude -> 8.990958128177748e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978376493147954e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054103e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31361 (min) 0.314072 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350352 (min) 0.462923 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.313725 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3461 (min) 0.452975 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043393e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.313884 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346042 (min) 0.452796 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043393e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313596 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340663 (min) 0.439935 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: -5.109011213545591e-21 <- latitude -> 8.99063486249507e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981451881102665e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032682e-12 degrees.
20:14:54 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:54 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313165 (min) 0.313871 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340497 (min) 0.439159 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530014e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314105 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334519 (min) 0.424435 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038052e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.314095 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334474 (min) 0.424481 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972037398e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.313917 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328375 (min) 0.405741 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:54 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:54 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:54 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:54 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:54 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:54 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:54 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:54 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:54 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.99142570468544e-06
20:14:54 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7983120764519953e-05
20:14:54 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:54 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535388e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:54 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.314028 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328398 (min) 0.404727 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:54 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:54 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:54 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:54 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:54 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:54 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:54 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:54 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:54 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:54 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:54 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:54 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:54 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546119e-12 degrees.
20:14:54 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:54 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:54 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:54 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314045 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32267 (min) 0.384942 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47519333955148e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314115 (min) 0.314001 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322653 (min) 0.384936 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546122e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313739 (min) 0.314123 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317943 (min) 0.362154 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:55 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:55 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:11
20:14:55 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:55 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:55 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:55 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:55 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:55 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:55 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:55 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:55 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:55 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:55 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:55 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:55 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:55 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:55 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:55 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:55 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:55 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:55 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:55 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:55 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:23 to 2000-01-01 00:00:11)
20:14:55 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:55 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:55 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:55 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:55 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:55 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:55 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:23 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:55 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314158 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350607 (min) 0.458938 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599698e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314077 (min) 0.314155 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352979 (min) 0.464891 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621138e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314056 (min) 0.314136 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352892 (min) 0.4644 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314112 (min) 0.314112 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353653 (min) 0.466031 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:55 DEBUG opendrift.models.basemodel:2054: -7.025247507905308e-20 <- latitude -> 8.893843480722923e-06
20:14:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.790567348513463e-05
20:14:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
20:14:55 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:14:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313753 (min) 0.313781 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353839 (min) 0.467621 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113157e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314139 (min) 0.314045 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352945 (min) 0.466223 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129245e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31408 (min) 0.313911 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353005 (min) 0.466373 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631929e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314084 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35019 (min) 0.460531 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:55 DEBUG opendrift.models.basemodel:2054: -6.583290054467865e-20 <- latitude -> 8.938117018187757e-06
20:14:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7949776976896467e-05
20:14:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150722e-12 degrees.
20:14:55 DEBUG opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
20:14:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 40 elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 40 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 40 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313823 (min) 0.313856 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350161 (min) 0.460908 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193008e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314047 (min) 0.313914 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346054 (min) 0.451593 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321511e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314 (min) 0.313956 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346052 (min) 0.452071 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717793e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313879 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340651 (min) 0.439163 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:55 DEBUG opendrift.models.basemodel:2054: -6.575720290983719e-20 <- latitude -> 8.962262961663822e-06
20:14:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968598559298942e-05
20:14:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4958 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776816e-12 degrees.
20:14:55 DEBUG opendrift.readers.basereader.variables:829: Masking 42 elements outside coverage
20:14:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 42 elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 42 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 42 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.313945 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340334 (min) 0.439277 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824918e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313504 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334481 (min) 0.422524 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867204e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.313572 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334486 (min) 0.422384 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862469e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.314018 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328285 (min) 0.403756 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:55 DEBUG opendrift.models.basemodel:2054: -6.335156893366314e-20 <- latitude -> 8.974967431294384e-06
20:14:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976169530840492e-05
20:14:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835617e-12 degrees.
20:14:55 DEBUG opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
20:14:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 37 elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 37 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 37 elements
20:14:55 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:55 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313684 (min) 0.313416 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328206 (min) 0.405452 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:55 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:55 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:55 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:55 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:55 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:55 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306096e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313695 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322677 (min) 0.382669 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338287e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314124 (min) 0.313685 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322681 (min) 0.382446 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835609e-12 degrees.
20:14:55 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:55 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:55 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313827 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317942 (min) 0.360153 (max)
20:14:55 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:55 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:55 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:55 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:55 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:55 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:55 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:55 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:55 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:55 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:55 DEBUG opendrift.models.basemodel:2054: -5.849052038963903e-20 <- latitude -> 8.982302501077877e-06
20:14:55 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978533666299794e-05
20:14:55 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:55 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:55 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
20:14:55 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:55 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.27526570179805e-12 degrees.
20:14:55 DEBUG opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
20:14:55 DEBUG opendrift.models.basemodel.environment:767: Data missing for 27 elements.
20:14:55 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:55 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:55 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:55 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 27 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 27 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313845 (min) 0.314048 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318 (min) 0.359871 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677127e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313211 (min) 0.314054 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315057 (min) 0.337508 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295357e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313457 (min) 0.31404 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31511 (min) 0.33752 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289356e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314049 (min) 0.314033 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313964 (min) 0.314885 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -5.305258691492974e-20 <- latitude -> 8.985730880799822e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797809652425038e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3035163462632e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 18 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 18 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 18 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313835 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314152 (min) 0.314145 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739083e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313911 (min) 0.313815 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314979 (min) 0.33822 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257199e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314068 (min) 0.313794 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314979 (min) 0.337475 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755161e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314025 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318369 (min) 0.361261 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -4.4148999536871353e-20 <- latitude -> 8.988772021613529e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797582888129342e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733717e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 11 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 11 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 11 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313241 (min) 0.313823 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318382 (min) 0.362303 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717624e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313708 (min) 0.313758 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323111 (min) 0.385752 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33394011722566e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31378 (min) 0.313729 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323059 (min) 0.386205 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33394011722566e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.313802 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32862 (min) 0.407129 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -3.69175099649632e-20 <- latitude -> 8.99045553098065e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972258658183962e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712284e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314015 (min) 0.314144 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328765 (min) 0.392037 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198864e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313942 (min) 0.313949 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335089 (min) 0.423709 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3491520027069e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313989 (min) 0.313943 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33503 (min) 0.424567 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706902e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313956 (min) 0.314076 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340865 (min) 0.440349 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -2.597579710462041e-20 <- latitude -> 8.991218240051177e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967728678017766e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696202e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314073 (min) 0.313989 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340848 (min) 0.435626 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685458e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.314108 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346222 (min) 0.448888 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690809e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314116 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346351 (min) 0.447955 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35784450869622e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.314008 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350464 (min) 0.456735 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -2.0632043619105505e-20 <- latitude -> 8.99138075796063e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.796236133770716e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680105e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314002 (min) 0.31408 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350485 (min) 0.458984 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674759e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314032 (min) 0.314063 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353073 (min) 0.465851 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37522952067476e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314071 (min) 0.314045 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353115 (min) 0.464904 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768012e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314101 (min) 0.314068 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353986 (min) 0.466606 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -1.8836016239006215e-20 <- latitude -> 8.991161514911372e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.795591572535033e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674772e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314043 (min) 0.313979 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35374 (min) 0.467723 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161336e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313911 (min) 0.314013 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352758 (min) 0.466325 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31387 (min) 0.314024 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352883 (min) 0.465548 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.313988 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350285 (min) 0.459772 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -1.2869024134241997e-20 <- latitude -> 8.990671976230392e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7947597280780078e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.313877 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350232 (min) 0.461897 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314109 (min) 0.313147 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345573 (min) 0.452403 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658684e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314096 (min) 0.312826 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345551 (min) 0.452054 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965868e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.313627 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340655 (min) 0.439188 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -1.1745508741493283e-20 <- latitude -> 8.989911213900746e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7936538604294024e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653284e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313797 (min) 0.314093 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340454 (min) 0.439943 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139899e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313996 (min) 0.313535 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334337 (min) 0.423225 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647936e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313983 (min) 0.313665 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33429 (min) 0.423441 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647936e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314086 (min) 0.313852 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328376 (min) 0.40476 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -1.4172332715541336e-20 <- latitude -> 8.98992322913387e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7942436701524404e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637231e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314031 (min) 0.314128 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328418 (min) 0.404782 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:56 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:56 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:56 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:56 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:56 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:56 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134567e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314035 (min) 0.314145 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322631 (min) 0.384463 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513993e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.314144 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322661 (min) 0.384424 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642608e-12 degrees.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314064 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318071 (min) 0.361717 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:56 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:56 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:56 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:56 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:56 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:56 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:56 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:56 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:56 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:56 DEBUG opendrift.models.basemodel:2054: -1.8890489507337855e-20 <- latitude -> 8.990725713917539e-06
20:14:56 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7948742422091833e-05
20:14:56 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:56 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
20:14:56 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:56 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:56 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:56 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:56 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:56 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:56 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:56 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:56 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:56 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:56 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:56 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:56 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314005 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318128 (min) 0.359603 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:56 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113097e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313847 (min) 0.314086 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31484 (min) 0.337285 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361578e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313819 (min) 0.314051 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314769 (min) 0.337228 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062114e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314025 (min) 0.314122 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31404 (min) 0.31432 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -2.452040349943347e-20 <- latitude -> 8.991178994407144e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955194037388174e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314008 (min) 0.31402 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313602 (min) 0.314283 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113139e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314078 (min) 0.314152 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315277 (min) 0.339187 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615748e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.314151 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315246 (min) 0.338966 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615748e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313924 (min) 0.314107 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318292 (min) 0.362732 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -3.0175783781637885e-20 <- latitude -> 8.991336735209634e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7961419808330107e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097003e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314092 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318293 (min) 0.362248 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4469426950863e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.313879 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32305 (min) 0.385847 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594343e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.314009 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32304 (min) 0.385502 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091664e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314088 (min) 0.31401 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328757 (min) 0.406369 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -3.448492935722252e-20 <- latitude -> 8.991348585693357e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967128681693613e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589003e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.314128 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328766 (min) 0.405098 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091607e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.31403 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334947 (min) 0.424996 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605002e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313843 (min) 0.314072 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334806 (min) 0.425008 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605004e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314157 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341054 (min) 0.440821 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -3.626997944684851e-20 <- latitude -> 8.991351320042408e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7972142281966784e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070177e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31366 (min) 0.314121 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340778 (min) 0.440788 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048751e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.314042 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346032 (min) 0.45352 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305411e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314012 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346255 (min) 0.453987 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556789e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313917 (min) 0.314108 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35046 (min) 0.463292 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 21 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -3.4234967396972315e-20 <- latitude -> 8.990650811523119e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976200282606003e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314131 (min) 0.314045 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350268 (min) 0.461811 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203805e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314069 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353041 (min) 0.468814 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043416e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314064 (min) 0.313973 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353077 (min) 0.469187 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043416e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313989 (min) 0.31393 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353976 (min) 0.471019 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -2.7842627400784077e-20 <- latitude -> 8.991674450099013e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797867681098825e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043429e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314113 (min) 0.313795 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353929 (min) 0.470445 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054168e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.314026 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352886 (min) 0.467429 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064891e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.314073 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352947 (min) 0.467023 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064238e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314106 (min) 0.313967 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350348 (min) 0.461262 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 23 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -1.7616440020306985e-20 <- latitude -> 8.992159605543848e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980963139097685e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757285e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313928 (min) 0.31411 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350304 (min) 0.46279 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043384e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314142 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345802 (min) 0.453079 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4730202130541e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314119 (min) 0.314133 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34575 (min) 0.453019 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551422e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.314048 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340606 (min) 0.440141 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:57 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:57 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:57 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:57 DEBUG opendrift.models.basemodel:2054: -5.068764688677494e-21 <- latitude -> 8.992184846222396e-06
20:14:57 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.798130070497926e-05
20:14:57 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:57 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529992e-12 degrees.
20:14:57 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:57 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:57 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:57 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314022 (min) 0.31412 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340767 (min) 0.440292 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:57 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:57 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:57 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524634e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.313848 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334595 (min) 0.424629 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027313e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.313826 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334558 (min) 0.424689 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027315e-12 degrees.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31406 (min) 0.31393 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328365 (min) 0.405917 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:57 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:57 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:57 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:57 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:57 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:14:57 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:57 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:57 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:57 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:57 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:57 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:57 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:57 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:57 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:57 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:57 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:57 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:57 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:57 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:57 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:14:58 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:11.500000
20:14:58 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:14:58 DEBUG opendrift.config:168: Adding 50 config items from environment
20:14:58 DEBUG opendrift.config:168: Adding 5 config items from environment
20:14:58 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:14:58 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:14:58 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:14:58 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:14:58 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:14:58 DEBUG opendrift.config:178: Overwriting config item seed:z
20:14:58 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:14:58 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:14:58 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:14:58 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:14:58 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:14:58 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:14:58 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:14:58 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:14:58 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:14:58 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:14:58 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:14:58 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:23.500000 to 2000-01-01 00:00:11.500000)
20:14:58 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:58 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:14:58 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:14:58 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:14:58 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 INFO opendrift.models.basemodel:946: All points are in ocean
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:14:58 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:23.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.314118 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341083 (min) 0.437666 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599046e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314108 (min) 0.313968 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346303 (min) 0.450602 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615779e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.314 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34632 (min) 0.449985 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.314156 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350523 (min) 0.458883 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:23 - step 2 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -6.834221332247266e-20 <- latitude -> 8.892651615852824e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7903439664423962e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102406e-12 degrees.
20:14:58 DEBUG opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
20:14:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 33 elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 33 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 33 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313587 (min) 0.314055 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350426 (min) 0.46017 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011315e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.314136 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352865 (min) 0.466931 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129243e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.314035 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353029 (min) 0.466313 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134603e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314089 (min) 0.313986 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353813 (min) 0.468022 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -6.623104844760967e-20 <- latitude -> 8.937666122874143e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7948848377447173e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648041e-12 degrees.
20:14:58 DEBUG opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
20:14:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 41 elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 41 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 41 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31378 (min) 0.313906 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353573 (min) 0.468617 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519365e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314156 (min) 0.314062 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352934 (min) 0.466297 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321511e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314151 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352998 (min) 0.467222 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314152 (min) 0.314066 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35029 (min) 0.461365 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22 - step 4 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -6.704194880960244e-20 <- latitude -> 8.962420483174946e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968675250282262e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4954 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771455e-12 degrees.
20:14:58 DEBUG opendrift.readers.basereader.variables:829: Masking 46 elements outside coverage
20:14:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 46 elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 46 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 46 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314045 (min) 0.314097 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.349974 (min) 0.46169 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830322e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314145 (min) 0.313956 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345757 (min) 0.450815 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873169e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313931 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34568 (min) 0.450271 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365159e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313667 (min) 0.313942 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340493 (min) 0.437468 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -6.594133623957623e-20 <- latitude -> 8.975624324392077e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797655743867395e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4956 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332906e-12 degrees.
20:14:58 DEBUG opendrift.readers.basereader.variables:829: Masking 44 elements outside coverage
20:14:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 44 elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 44 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 44 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.313942 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340088 (min) 0.439901 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798079e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314011 (min) 0.314092 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334356 (min) 0.421477 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338249e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.314101 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334349 (min) 0.420954 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332925e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31396 (min) 0.312741 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328322 (min) 0.402644 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 6 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -6.346952389671703e-20 <- latitude -> 8.98312295205998e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797873100068948e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787325e-12 degrees.
20:14:58 DEBUG opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
20:14:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 34 elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 34 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 34 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314006 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328126 (min) 0.405527 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252475e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.31414 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322501 (min) 0.383759 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284671e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314147 (min) 0.314142 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322447 (min) 0.383692 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587278637e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314158 (min) 0.313766 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318037 (min) 0.361084 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -5.869939499254376e-20 <- latitude -> 8.98691818142112e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7977589656808987e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744442e-12 degrees.
20:14:58 DEBUG opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
20:14:58 DEBUG opendrift.models.basemodel.environment:767: Data missing for 23 elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 23 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 23 elements
20:14:58 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:58 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313967 (min) 0.313647 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318072 (min) 0.361053 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:58 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:58 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:58 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:58 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:58 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:58 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717641e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.313698 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315119 (min) 0.337075 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241761e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.313675 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31512 (min) 0.337163 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:58 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:58 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:58 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236404e-12 degrees.
20:14:58 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:58 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:58 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:58 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313063 (min) 0.313666 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314079 (min) 0.31419 (max)
20:14:58 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:58 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:58 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:58 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:58 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:58 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:58 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:58 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 8 of 24 - 5000 active elements (0 deactivated)
20:14:58 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:58 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:58 DEBUG opendrift.models.basemodel:2054: -5.3073825478452033e-20 <- latitude -> 8.9882754285925e-06
20:14:58 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973899039972337e-05
20:14:58 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:58 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:58 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:58 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209592e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 14 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 14 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 14 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313944 (min) 0.313996 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314056 (min) 0.312959 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690822e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313457 (min) 0.313873 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315073 (min) 0.338811 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209576e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313251 (min) 0.313844 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314905 (min) 0.338175 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701538e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312824 (min) 0.31402 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318297 (min) 0.362003 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -3.833432065270653e-20 <- latitude -> 8.990105014736031e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968012319927808e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685487e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 8 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 8 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 8 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313403 (min) 0.313908 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31832 (min) 0.363169 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172058e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313831 (min) 0.313798 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323028 (min) 0.376199 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118278e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313726 (min) 0.313757 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323109 (min) 0.375264 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118278e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313819 (min) 0.313723 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328698 (min) 0.395663 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 10 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -3.729921522063263e-20 <- latitude -> 8.9913384755205e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7960261372319957e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166717e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314017 (min) 0.313728 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328647 (min) 0.404602 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161378e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313948 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335043 (min) 0.421099 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38174890016668e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314091 (min) 0.313953 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334943 (min) 0.420067 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166738e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313883 (min) 0.31396 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340808 (min) 0.435798 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -3.023781372947361e-20 <- latitude -> 8.992102089030273e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950968361711563e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150615e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313872 (min) 0.313795 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340942 (min) 0.435738 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145272e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3141 (min) 0.313788 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346394 (min) 0.449746 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150628e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314074 (min) 0.313667 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346381 (min) 0.448826 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647948e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313922 (min) 0.313988 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350269 (min) 0.457679 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 12 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -1.1047931598573814e-20 <- latitude -> 8.992543156357649e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794020092945788e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145282e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 3 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 3 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 3 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.313967 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350537 (min) 0.45899 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145232e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314084 (min) 0.31386 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353079 (min) 0.466583 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647975e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314079 (min) 0.313754 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353137 (min) 0.46609 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145235e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314064 (min) 0.313775 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353992 (min) 0.467807 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -1.530256296929706e-20 <- latitude -> 8.992755583404717e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7942388024804472e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637204e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313907 (min) 0.314063 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353566 (min) 0.469055 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123817e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313706 (min) 0.314136 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352784 (min) 0.464909 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313813 (min) 0.314139 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352715 (min) 0.465256 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313563 (min) 0.314137 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350215 (min) 0.459483 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 14 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -1.0268821280475951e-20 <- latitude -> 8.992780445164394e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794656766561684e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626503e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313921 (min) 0.314113 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350215 (min) 0.461271 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621156e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314041 (min) 0.313895 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345654 (min) 0.452404 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626516e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314039 (min) 0.3137 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345823 (min) 0.452497 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129195e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.314086 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340644 (min) 0.439614 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -1.0076689392353445e-20 <- latitude -> 8.992601417946182e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950994502585507e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621167e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 7 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 7 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 7 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313805 (min) 0.314086 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340561 (min) 0.438752 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615753e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314053 (min) 0.314145 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334451 (min) 0.423599 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118433e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314102 (min) 0.314091 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334388 (min) 0.423818 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.314065 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328158 (min) 0.405088 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 16 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -1.3211271409230245e-20 <- latitude -> 8.992668910988633e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7955363461045484e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107725e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31391 (min) 0.313826 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327975 (min) 0.40518 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599695e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314127 (min) 0.313752 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322431 (min) 0.384169 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31412 (min) 0.313973 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322354 (min) 0.384162 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313889 (min) 0.314133 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317723 (min) 0.361467 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -1.8287480093325716e-20 <- latitude -> 8.992814192221743e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7959685270666494e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097026e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313985 (min) 0.31412 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317823 (min) 0.361278 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091683e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.31407 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314798 (min) 0.337575 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097047e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314146 (min) 0.314131 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314695 (min) 0.337588 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599726e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314004 (min) 0.314151 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313415 (min) 0.314766 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 18 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -2.4070461903554835e-20 <- latitude -> 8.992974485182197e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7963938943052206e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605103e-12 degrees.
20:14:59 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:14:59 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:14:59 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:14:59 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.3141 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313956 (min) 0.314446 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:14:59 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:14:59 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:14:59 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:14:59 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:14:59 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:14:59 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086266e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31406 (min) 0.313777 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314879 (min) 0.338873 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091628e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.313613 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314717 (min) 0.338814 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588948e-12 degrees.
20:14:59 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:14:59 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:14:59 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:14:59 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314136 (min) 0.314034 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318171 (min) 0.362367 (max)
20:14:59 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:14:59 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:14:59 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:14:59 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:14:59 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:14:59 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:14:59 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:14:59 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
20:14:59 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:14:59 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:14:59 DEBUG opendrift.models.basemodel:2054: -2.9869413088301674e-20 <- latitude -> 8.993073068717345e-06
20:14:59 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7968987459192703e-05
20:14:59 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:14:59 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:14:59 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:14:59 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:14:59 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:14:59 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:14:59 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:14:59 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572885e-12 degrees.
20:15:00 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.313822 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317977 (min) 0.362439 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567534e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.314114 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323028 (min) 0.385523 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075577e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314065 (min) 0.314081 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323055 (min) 0.385843 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45998145407022e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314096 (min) 0.314114 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328636 (min) 0.406722 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 20 of 24 - 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:00 DEBUG opendrift.models.basemodel:2054: -3.4265654920432626e-20 <- latitude -> 8.993130568409217e-06
20:15:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7973359643351533e-05
20:15:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
20:15:00 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313651 (min) 0.313866 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328668 (min) 0.40521 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578296e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.314034 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334889 (min) 0.424332 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158366e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314123 (min) 0.313904 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334725 (min) 0.424943 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086342e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313889 (min) 0.313912 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341051 (min) 0.440806 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:00 DEBUG opendrift.models.basemodel:2054: -3.6105557987891904e-20 <- latitude -> 8.993160339853084e-06
20:15:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797611139628675e-05
20:15:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599766e-12 degrees.
20:15:00 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314116 (min) 0.314027 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340784 (min) 0.440742 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599668e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313956 (min) 0.314029 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346391 (min) 0.453801 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615776e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313936 (min) 0.314079 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346364 (min) 0.453452 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610387e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313869 (min) 0.314095 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350303 (min) 0.462729 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 22 of 24 - 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:00 DEBUG opendrift.models.basemodel:2054: -3.410974673885517e-20 <- latitude -> 8.993172094088329e-06
20:15:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7979211414955263e-05
20:15:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086285e-12 degrees.
20:15:00 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314141 (min) 0.313903 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350444 (min) 0.461765 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064841e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313982 (min) 0.314154 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353042 (min) 0.468957 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757288e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313852 (min) 0.314138 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353001 (min) 0.468506 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070203e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313919 (min) 0.314096 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353935 (min) 0.470339 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:00 DEBUG opendrift.models.basemodel:2054: -2.7749613663992534e-20 <- latitude -> 8.993172683614709e-06
20:15:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7980767425146062e-05
20:15:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551428e-12 degrees.
20:15:00 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.314012 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3538 (min) 0.469674 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48388584554072e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314016 (min) 0.314084 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353042 (min) 0.468611 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546082e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314029 (min) 0.314058 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353036 (min) 0.468311 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314004 (min) 0.314153 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350361 (min) 0.462493 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12 - step 24 of 24 - 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:00 DEBUG opendrift.models.basemodel:2054: -1.7551390153168683e-20 <- latitude -> 8.993166124553678e-06
20:15:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7982847319432647e-05
20:15:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
20:15:00 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:00 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313983 (min) 0.314094 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350228 (min) 0.461589 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:00 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452463e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.314101 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346095 (min) 0.452997 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027311e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.314108 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346126 (min) 0.452782 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027311e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313765 (min) 0.314014 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340767 (min) 0.439871 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:00 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:00 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:00 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:00 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:00 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:00 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:15:00 INFO opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:12
20:15:00 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:15:00 DEBUG opendrift.config:168: Adding 50 config items from environment
20:15:00 DEBUG opendrift.config:168: Adding 5 config items from environment
20:15:00 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:15:00 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:15:00 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:15:00 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:15:00 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:15:00 DEBUG opendrift.config:178: Overwriting config item seed:z
20:15:00 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:15:00 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:15:00 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:15:00 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:15:00 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:15:00 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:15:00 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:15:00 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:15:00 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:15:00 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:15:00 INFO opendrift.models.basemodel:1844: Backwards simulation, starting from last seeded element
20:15:00 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:24 to 2000-01-01 00:00:12)
20:15:00 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:15:00 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
20:15:00 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:15:00 INFO opendrift.models.basemodel:1927: Backwards simulation, starting at time of last seeded element
20:15:00 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 INFO opendrift.models.basemodel:946: All points are in ocean
20:15:00 DEBUG opendrift.models.basemodel:890: to be seeded: 5000, already seeded 0
20:15:00 DEBUG opendrift.models.basemodel:908: Released 5000 new elements.
20:15:00 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:00 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:24 - step 1 of 24 - 5000 active elements (0 deactivated)
20:15:00 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:00 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:00 DEBUG opendrift.models.basemodel:2054: 0.0 <- latitude -> 8.813352e-06
20:15:00 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7806567e-05
20:15:00 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:00 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:00 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:00 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:00 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:00 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:00 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:00 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:00 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:00 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:00 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:00 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:00 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314082 (min) 0.314121 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3288 (min) 0.404251 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:00 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:00 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:00 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:00 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:00 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605054e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314159 (min) 0.314074 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335091 (min) 0.422782 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314157 (min) 0.313933 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335114 (min) 0.422235 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118457e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.314144 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34106 (min) 0.437546 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:23.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -6.459824170488197e-20 <- latitude -> 8.890544105184437e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7898932442448768e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102405e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 31 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 31 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 31 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314059 (min) 0.313892 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341177 (min) 0.438867 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610467e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314149 (min) 0.313626 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346405 (min) 0.452126 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123875e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314143 (min) 0.313887 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346182 (min) 0.452065 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626558e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.314128 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350408 (min) 0.461123 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:23 - step 3 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -6.60102122224635e-20 <- latitude -> 8.935695803674047e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7945770447672615e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 41 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 41 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 41 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313735 (min) 0.314159 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350522 (min) 0.462218 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768024e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314115 (min) 0.313881 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352975 (min) 0.468016 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199016e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314098 (min) 0.31382 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352736 (min) 0.467339 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209743e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.313808 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353645 (min) 0.469077 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -6.595137505655354e-20 <- latitude -> 8.961248082926946e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967371497291276e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263398e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 49 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 49 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 49 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313857 (min) 0.314144 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35392 (min) 0.470491 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24484193083566e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314118 (min) 0.313466 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352219 (min) 0.468086 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.20572565388411e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.313597 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352507 (min) 0.467609 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21007190687858e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314122 (min) 0.313367 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350092 (min) 0.461729 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:22 - step 5 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -6.553580361730559e-20 <- latitude -> 8.97534573224585e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79762355501962e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4947 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338283e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 53 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 53 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 53 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 53 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31414 (min) 0.313553 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350177 (min) 0.462907 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803407e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31398 (min) 0.312284 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345988 (min) 0.449774 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.23180317185164e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314003 (min) 0.31231 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346036 (min) 0.448953 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338255e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314042 (min) 0.313733 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340565 (min) 0.436324 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -6.393668134642419e-20 <- latitude -> 8.983170465498647e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7978720858486285e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4953 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778669e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 47 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 47 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 47 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 47 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313577 (min) 0.314028 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.337886 (min) 0.440476 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252481e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314034 (min) 0.313604 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334551 (min) 0.423298 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289998e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314103 (min) 0.313509 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334566 (min) 0.423163 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284643e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313522 (min) 0.313579 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328262 (min) 0.404528 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:21 - step 7 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -6.090781744134395e-20 <- latitude -> 8.987454404737474e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797730686299112e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236412e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 31 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 31 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 31 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314044 (min) 0.313883 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328364 (min) 0.404411 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214979e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313941 (min) 0.313602 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322586 (min) 0.383501 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236415e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313801 (min) 0.313599 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322548 (min) 0.383423 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32742073773374e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313791 (min) 0.314152 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318059 (min) 0.36089 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -5.828478310087389e-20 <- latitude -> 8.989629605713637e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79724935113462e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204251e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 17 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 17 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 17 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313859 (min) 0.313721 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318082 (min) 0.361077 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177438e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314057 (min) 0.313817 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314735 (min) 0.337408 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701555e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313973 (min) 0.313768 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314821 (min) 0.337342 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3578445086962e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313779 (min) 0.313756 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313807 (min) 0.314689 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:20 - step 9 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -5.052410721771573e-20 <- latitude -> 8.990418586971498e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964198801722317e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669378e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 10 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 10 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 10 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313551 (min) 0.313847 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313876 (min) 0.312876 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150641e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314111 (min) 0.313971 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31525 (min) 0.339611 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166718e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31415 (min) 0.313951 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315245 (min) 0.339707 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38174890016672e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.313842 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318211 (min) 0.363626 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -3.7915374101449265e-20 <- latitude -> 8.99022125420683e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7952381663856813e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150605e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 6 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 6 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 6 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.314002 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318367 (min) 0.353237 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637225e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.314028 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.32311 (min) 0.383511 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647943e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314094 (min) 0.314015 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323051 (min) 0.384548 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145263e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314138 (min) 0.313829 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328712 (min) 0.405237 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:19 - step 11 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -3.215548158029528e-20 <- latitude -> 8.989315075476441e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.794076244503719e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637241e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314043 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328734 (min) 0.402501 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129151e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313881 (min) 0.313739 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.33507 (min) 0.420794 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163719e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313975 (min) 0.313717 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334932 (min) 0.420098 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418133861e-12 degrees.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314137 (min) 0.313709 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.341085 (min) 0.435151 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:01 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:01 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:01 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:01 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:01 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:01 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
20:15:01 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:01 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:01 DEBUG opendrift.models.basemodel:2054: -1.6554773193727708e-20 <- latitude -> 8.987912926911807e-06
20:15:01 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7946506776379034e-05
20:15:01 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:01 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
20:15:01 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:15:01 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:01 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:01 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:01 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:01 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:01 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:01 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:01 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:01 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:15:01 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:01 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:01 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314121 (min) 0.313969 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340897 (min) 0.437003 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:01 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:01 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:01 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:01 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:01 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:01 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:01 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:01 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:01 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113094e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314147 (min) 0.314104 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346171 (min) 0.45043 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314093 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346301 (min) 0.449733 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621131e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314135 (min) 0.314005 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350437 (min) 0.458699 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:18 - step 13 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -2.353759982784794e-20 <- latitude -> 8.986122379758147e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7950825947104285e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615782e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313782 (min) 0.314099 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350363 (min) 0.460636 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615792e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313789 (min) 0.313681 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352851 (min) 0.46712 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113115e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313783 (min) 0.313754 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35271 (min) 0.466384 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113113e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.3138 (min) 0.313713 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353565 (min) 0.468125 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -9.602138591456247e-21 <- latitude -> 8.983911436179173e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7953911255617292e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313824 (min) 0.313996 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353761 (min) 0.468842 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113137e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314099 (min) 0.314111 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352738 (min) 0.468002 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118493e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314076 (min) 0.314092 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352687 (min) 0.467733 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113136e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314068 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350179 (min) 0.461894 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:17 - step 15 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -6.476434223840259e-21 <- latitude -> 8.98647812923772e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.79576426783168e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107704e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 2 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 2 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 2 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314142 (min) 0.314048 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350315 (min) 0.462395 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610235e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313997 (min) 0.314128 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346066 (min) 0.452428 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599676e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31401 (min) 0.314117 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346099 (min) 0.452471 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599672e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31411 (min) 0.314056 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340639 (min) 0.43958 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -7.727061013439752e-21 <- latitude -> 8.98931471123111e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7960138639068698e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096999e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 5 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 5 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 5 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314097 (min) 0.313982 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340546 (min) 0.439614 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086287e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313887 (min) 0.313868 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334365 (min) 0.424226 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091648e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313998 (min) 0.313809 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334448 (min) 0.424163 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091648e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.314082 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328406 (min) 0.405427 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:16 - step 17 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -1.1806934221650353e-20 <- latitude -> 8.99055254571405e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7964056027077027e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583618e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313969 (min) 0.313997 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327977 (min) 0.404109 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086306e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313944 (min) 0.314007 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322599 (min) 0.384333 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086311e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313962 (min) 0.314048 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322628 (min) 0.384288 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583631e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314147 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318 (min) 0.361621 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -1.74165977464145e-20 <- latitude -> 8.990667946016848e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7967113557330978e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086321e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314132 (min) 0.31409 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317892 (min) 0.361566 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091696e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314148 (min) 0.314047 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315071 (min) 0.3378 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259974e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314144 (min) 0.314044 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315117 (min) 0.337856 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594386e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314055 (min) 0.313858 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314122 (min) 0.314725 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:15 - step 19 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -2.35660880928597e-20 <- latitude -> 8.990332998465997e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7970627179349053e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43825018909697e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31398 (min) 0.313892 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313804 (min) 0.314841 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075541e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314136 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315211 (min) 0.339116 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4512889480809e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314069 (min) 0.314156 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315208 (min) 0.338671 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578223e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314085 (min) 0.314107 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318217 (min) 0.362511 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -2.9582282488745775e-20 <- latitude -> 8.990397950323414e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7974159908603002e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005947e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313928 (min) 0.314085 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318294 (min) 0.363037 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551443e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.314007 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322721 (min) 0.384861 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054123e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314128 (min) 0.314038 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322926 (min) 0.38524 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054123e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313953 (min) 0.313759 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328443 (min) 0.406086 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:14 - step 21 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -3.410875979998409e-20 <- latitude -> 8.99128839551622e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7976346173667245e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546092e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313897 (min) 0.31411 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328702 (min) 0.406892 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546108e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314153 (min) 0.314071 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.334885 (min) 0.424167 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054147e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314155 (min) 0.314108 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.335002 (min) 0.423284 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47519333955147e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314081 (min) 0.3137 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340865 (min) 0.439113 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -3.588174246244113e-20 <- latitude -> 8.991544872019883e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.797953284086294e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059522e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313996 (min) 0.314151 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340926 (min) 0.441261 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572945e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314017 (min) 0.314109 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346316 (min) 0.450865 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080991e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314 (min) 0.314084 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.34634 (min) 0.450351 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583671e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314028 (min) 0.314131 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350335 (min) 0.459429 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:02 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:02 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:02 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:02 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:02 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:02 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:13 - step 23 of 24 - 5000 active elements (0 deactivated)
20:15:02 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:02 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:02 DEBUG opendrift.models.basemodel:2054: -3.393953400181886e-20 <- latitude -> 8.991384870231899e-06
20:15:02 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981095466315726e-05
20:15:02 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:02 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107819e-12 degrees.
20:15:02 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:02 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:02 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:02 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314092 (min) 0.314072 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350436 (min) 0.463408 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:02 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:02 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:02 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:02 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:02 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:02 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102346e-12 degrees.
20:15:02 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:02 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:02 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:02 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314036 (min) 0.314014 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352952 (min) 0.468962 (max)
20:15:02 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:02 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:02 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:02 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:02 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:02 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:02 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:02 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621107e-12 degrees.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314037 (min) 0.314107 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353084 (min) 0.469012 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361575e-12 degrees.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31404 (min) 0.314114 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353943 (min) 0.470837 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 5000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:12.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -2.7623310974595934e-20 <- latitude -> 8.990957568644507e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 0.0 <- longitude -> 1.7981225512097036e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588966e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 99 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 99 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 99 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314032 (min) 0.31411 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.353703 (min) 0.470603 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314129 (min) 0.313931 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.352965 (min) 0.468642 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086314e-12 degrees.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314134 (min) 0.313791 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.35293 (min) 0.468313 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588993e-12 degrees.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314063 (min) 0.313895 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.350244 (min) 0.462494 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 5000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
Make run with particles for the same period
o = o.clone()
x = [.9]
y = [.5]
lon, lat = double_gyre.xy2lonlat(x, y)
o.seed_elements(lon, lat, radius=.15, number=2000,
time=double_gyre.initial_time)
o.run(duration=duration, time_step=time_step,
time_step_output=time_step_output)
o.animation(buffer=0, lcs=lcs, hide_landmask=True)
20:15:03 DEBUG opendrift.models.oceandrift:115: No machine learning correction available.
20:15:03 DEBUG opendrift.config:168: Adding 50 config items from environment
20:15:03 DEBUG opendrift.config:168: Adding 5 config items from environment
20:15:03 DEBUG opendrift.config:168: Adding 18 config items from __init__
20:15:03 DEBUG opendrift.config:178: Overwriting config item readers:max_number_of_fails
20:15:03 DEBUG opendrift.config:168: Adding 5 config items from __init__
20:15:03 INFO opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.12.0 / v1.12.0-26-g390e945)
20:15:03 DEBUG opendrift.config:168: Adding 15 config items from oceandrift
20:15:03 DEBUG opendrift.config:178: Overwriting config item seed:z
20:15:03 DEBUG opendrift.models.basemodel.environment:328: Added reader double_gyre
20:15:03 INFO opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
20:15:03 DEBUG opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
20:15:03 DEBUG opendrift.models.basemodel.environment:328: Added reader global_landmask
20:15:03 INFO opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_height: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: x_wind: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: y_wind: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: upward_sea_water_velocity: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: ocean_vertical_diffusivity: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_significant_height: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_x_velocity: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_stokes_drift_y_velocity: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_to_direction: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_swell_wave_significant_height: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_to_direction: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_mean_period: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_surface_wind_wave_significant_height: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: surface_downward_x_stress: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: surface_downward_y_stress: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: turbulent_kinetic_energy: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: turbulent_generic_length_scale: 0.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: ocean_mixed_layer_thickness: 50.000000
20:15:03 INFO opendrift.models.basemodel.environment:248: sea_floor_depth_below_sea_level: 10000.000000
20:15:03 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
20:15:03 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
20:15:03 DEBUG opendrift.models.basemodel:1777:
------------------------------------------------------
Software and hardware:
OpenDrift version 1.12.0
Platform: Linux, 5.15.0-1057-aws
68.5677604675293 GB memory
36 processors (x86_64)
NumPy version 1.26.4
SciPy version 1.14.1
Matplotlib version 3.9.1
NetCDF4 version 1.6.1
Xarray version 2024.11.0
ADIOS (adios_db) version 1.2.5
Copernicusmarine version 1.3.5
Python version 3.11.6 | packaged by conda-forge | (main, Oct 3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------
20:15:03 DEBUG opendrift.models.basemodel:1791: No output file is specified, neglecting export_buffer_length
20:15:03 DEBUG opendrift.models.basemodel:1909: Finalizing environment and preparing readers for simulation coverage ([-0.00021222691688622895, -0.00021679325746477794, 0.0002285829130809902, 0.00022586998224456643]) and time (2000-01-01 00:00:00 to 2000-01-01 00:00:12)
20:15:03 DEBUG opendrift.models.basemodel.environment:180: Preparing double_gyre for extent [-0.00021222691688622895, -0.00021679325746477794, 0.0002285829130809902, 0.00022586998224456643]
20:15:03 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:180: Preparing global_landmask for extent [-0.00021222691688622895, -0.00021679325746477794, 0.0002285829130809902, 0.00022586998224456643]
20:15:03 DEBUG opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
20:15:03 INFO opendrift.models.basemodel:935: Using existing reader for land_binary_mask
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 INFO opendrift.models.basemodel:946: All points are in ocean
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 2000, already seeded 0
20:15:03 DEBUG opendrift.models.basemodel:908: Released 2000 new elements.
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:00 - step 1 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.7704125e-07 <- latitude -> 9.653766e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 3.9892993e-06 <- longitude -> 1.2366697e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.2676586295062415e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.252419 (min) 0.284671 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314102 (min) 0.0478563 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.331765861177663e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.291155 (min) 0.269117 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315211 (min) 0.0695511 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.352410562901806e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.290735 (min) 0.270177 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315199 (min) 0.0669778 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.3556702526477854e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.295645 (min) 0.283152 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318196 (min) 0.0863955 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:00.500000 - step 2 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 3.5812578193304986e-06 <- longitude -> 1.2886020904817582e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.4273834270594255e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.298798 (min) 0.25696 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318119 (min) 0.0860955 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.5349531886768585e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312094 (min) 0.261574 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322603 (min) 0.122044 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.56103070664471e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312105 (min) 0.263431 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322788 (min) 0.120001 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.562117269893366e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312142 (min) 0.254291 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327874 (min) 0.128165 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01 - step 3 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 2.792038809851422e-06 <- longitude -> 1.3626300044457194e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.68055266399741e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311303 (min) 0.284519 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.327358 (min) 0.145909 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.84027746155054e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.310265 (min) 0.30222 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322366 (min) 0.163344 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.869614669264364e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311082 (min) 0.302192 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322005 (min) 0.162957 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.864181853021061e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313329 (min) 0.299065 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31966 (min) 0.159845 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:01.500000 - step 4 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 2.3433170407976688e-06 <- longitude -> 1.4768355895268097e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.036945409558116e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.310668 (min) 0.306428 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.306897 (min) 0.173604 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.244478990052285e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313121 (min) 0.305608 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31279 (min) 0.178779 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.258604312284852e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313065 (min) 0.304283 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.310198 (min) 0.178534 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.248825243046906e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313016 (min) 0.304956 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.305569 (min) 0.174323 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02 - step 5 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 2.020224884295447e-06 <- longitude -> 1.6080449030164012e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.467224456027875e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.30987 (min) 0.304386 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.308334 (min) 0.179972 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.7258265092095796e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313532 (min) 0.310438 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.318372 (min) 0.18418 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.6932296117492136e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313626 (min) 0.311056 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.316013 (min) 0.178911 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.697575864743856e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31373 (min) 0.310863 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.315041 (min) 0.177684 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:02.500000 - step 6 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 1.626703756941697e-06 <- longitude -> 1.700351272362377e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.934446652952339e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312799 (min) 0.31167 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314421 (min) 0.25176 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.1452399231924e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311292 (min) 0.311703 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317703 (min) 0.313892 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.121335531721829e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311113 (min) 0.312198 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314406 (min) 0.319067 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.1322011642078825e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311216 (min) 0.312579 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31662 (min) 0.318085 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03 - step 7 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 1.3601528799821806e-06 <- longitude -> 1.7471718432348866e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.319090042977927e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313697 (min) 0.313515 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.311619 (min) 0.385796 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.49511328926076e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313257 (min) 0.313537 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.306212 (min) 0.420419 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.475555150784273e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31322 (min) 0.313568 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.303856 (min) 0.414678 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.471208897789635e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313505 (min) 0.313481 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.308434 (min) 0.40455 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:03 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:03 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:03 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:03 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:03 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:03 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:03.500000 - step 8 of 24 - 2000 active elements (0 deactivated)
20:15:03 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:03 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:03 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:03 DEBUG opendrift.models.basemodel:2059: 1.1692032612535178e-06 <- longitude -> 1.7644113053134e-05
20:15:03 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:03 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.629847132094455e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:03 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:03 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313531 (min) 0.313287 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.279902 (min) 0.424433 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:03 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:03 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:03 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:03 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:03 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:03 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.753715342441138e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313797 (min) 0.313615 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.246349 (min) 0.416034 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:03 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:03 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:03 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:03 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:03 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:03 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:03 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.72111844498134e-12 degrees.
20:15:03 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:03 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:03 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:03 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:03 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:03 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313768 (min) 0.313381 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.247339 (min) 0.414439 (max)
20:15:03 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.72111844498134e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313408 (min) 0.312279 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.256501 (min) 0.397194 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04 - step 9 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 8.599814684714172e-07 <- longitude -> 1.764770696388403e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.847159781825746e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313587 (min) 0.313952 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.220533 (min) 0.394525 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.951469853697072e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313457 (min) 0.314055 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.2558 (min) 0.376565 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.908007323751304e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313432 (min) 0.314056 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.250406 (min) 0.375382 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.91235357674533e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31358 (min) 0.31393 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.27004 (min) 0.354685 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:04.500000 - step 10 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 6.179414372133616e-07 <- longitude -> 1.777129427922612e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.994932383643355e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313459 (min) 0.314113 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.270249 (min) 0.357494 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.023183028109024e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314083 (min) 0.313834 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.282163 (min) 0.335041 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.988413004151928e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314072 (min) 0.314002 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.278317 (min) 0.334454 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.99275925714656e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314047 (min) 0.314111 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.294931 (min) 0.311531 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05 - step 11 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 4.535055112236554e-07 <- longitude -> 1.7839960441196046e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.00362488963315e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314093 (min) 0.311381 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.293169 (min) 0.310504 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.9971055101411e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31379 (min) 0.313225 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.301907 (min) 0.326371 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.971027992172658e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313758 (min) 0.313054 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.300468 (min) 0.326896 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.971027992172653e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313657 (min) 0.314116 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.310466 (min) 0.347406 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:05.500000 - step 12 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 3.33995316852893e-07 <- longitude -> 1.7862780134320513e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.00362488963333e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313469 (min) 0.31379 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.313041 (min) 0.356001 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.042741166585008e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312526 (min) 0.312074 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.317412 (min) 0.364968 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.023183028109118e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312801 (min) 0.311962 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.316414 (min) 0.363214 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.02535615460644e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313534 (min) 0.309264 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.325947 (min) 0.381649 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06 - step 13 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 1.9920120155245995e-07 <- longitude -> 1.7861197552835202e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.053606799071543e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313691 (min) 0.314046 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.323186 (min) 0.393704 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.062299305060767e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.310077 (min) 0.309764 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.330547 (min) 0.415228 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.047087419579533e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.310819 (min) 0.309522 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.329259 (min) 0.415231 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.051433672574174e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311358 (min) 0.305968 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.3383 (min) 0.429946 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:06.500000 - step 14 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 1.424099879800901e-07 <- longitude -> 1.787419145324123e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.07751119054156e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312627 (min) 0.288356 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340776 (min) 0.431605 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.105761835007291e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312902 (min) 0.297419 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340868 (min) 0.445983 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.094896202520696e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312903 (min) 0.299858 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.340021 (min) 0.446938 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.097069329018016e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31248 (min) 0.303938 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345771 (min) 0.455969 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07 - step 15 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 1.3160840439816407e-07 <- longitude -> 1.7883913412141105e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.11445434099653e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.305372 (min) 0.313591 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.346545 (min) 0.45484 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.131839352974573e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.309215 (min) 0.308755 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345166 (min) 0.463431 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.12531997348309e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.309 (min) 0.308922 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.344156 (min) 0.461886 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.120973720488603e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.308816 (min) 0.308407 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.345664 (min) 0.463723 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:07.500000 - step 16 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 1.0998212621378495e-07 <- longitude -> 1.788579045412835e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617947732e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.310691 (min) 0.306305 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.344785 (min) 0.467169 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.175301882921517e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312994 (min) 0.305544 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.332783 (min) 0.464254 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.17095562992688e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312994 (min) 0.3063 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.329299 (min) 0.465072 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.173128756424202e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31318 (min) 0.305557 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.322991 (min) 0.459502 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08 - step 17 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 7.359096756491293e-08 <- longitude -> 1.78909605762548e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402719e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31249 (min) 0.308187 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.339297 (min) 0.461604 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381244e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313187 (min) 0.313221 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.328459 (min) 0.452039 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527385971e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313354 (min) 0.313154 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.326196 (min) 0.451701 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.201379400889285e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313502 (min) 0.312519 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.31395 (min) 0.439098 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:08.500000 - step 18 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 3.8759007205284485e-08 <- longitude -> 1.7904977353621852e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370487e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313466 (min) 0.312534 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.307154 (min) 0.436234 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370447e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313667 (min) 0.313799 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.302238 (min) 0.419899 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375809e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313575 (min) 0.313783 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.297455 (min) 0.421026 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21007190687849e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313344 (min) 0.31389 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.275942 (min) 0.402676 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09 - step 19 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 2.4239641466677705e-08 <- longitude -> 1.791344259751774e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381128e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313565 (min) 0.312168 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.289114 (min) 0.401568 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386643e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314051 (min) 0.313789 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.306051 (min) 0.383667 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.19703314789469e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314038 (min) 0.313763 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.30818 (min) 0.384044 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.194860021397366e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313269 (min) 0.313183 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.30047 (min) 0.36147 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:09.500000 - step 20 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 1.9560263940206216e-08 <- longitude -> 1.7922373160621952e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365149e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313301 (min) 0.312875 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.314305 (min) 0.361689 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343726e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313289 (min) 0.312793 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.304775 (min) 0.337456 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22528379235981e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313039 (min) 0.312861 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.303921 (min) 0.337204 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359804e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313507 (min) 0.312411 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.287983 (min) 0.313568 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10 - step 21 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 1.189835898343296e-08 <- longitude -> 1.792730151670915e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835625e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312455 (min) 0.313431 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.291058 (min) 0.313219 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824881e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.308072 (min) 0.313954 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.280329 (min) 0.337822 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846298e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.308189 (min) 0.313942 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.28025 (min) 0.337889 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343008e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.309566 (min) 0.313117 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.264825 (min) 0.361629 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:10.500000 - step 22 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 8.411795128413995e-09 <- longitude -> 1.794811157853357e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.255707563321611e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311753 (min) 0.313613 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.281093 (min) 0.361366 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803542e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31252 (min) 0.313506 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.276025 (min) 0.384429 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327038e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.31246 (min) 0.313644 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.274392 (min) 0.384461 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830347e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.314107 (min) 0.313179 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.258136 (min) 0.405362 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11 - step 23 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 6.95563470390035e-09 <- longitude -> 1.7959245533049257e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.294823840273992e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313696 (min) 0.313789 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.268899 (min) 0.402424 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31003572575524e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311184 (min) 0.314071 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.247084 (min) 0.423967 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284102e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312162 (min) 0.314024 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.249469 (min) 0.424046 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587278733e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.313381 (min) 0.314029 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.240822 (min) 0.439994 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:890: to be seeded: 0, already seeded 2000
20:15:04 DEBUG opendrift.models.basemodel:2034: ======================================================================
20:15:04 INFO opendrift.models.basemodel:2035: 2000-01-01 00:00:11.500000 - step 24 of 24 - 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2041: 0 elements scheduled.
20:15:04 DEBUG opendrift.models.basemodel:2043: ======================================================================
20:15:04 DEBUG opendrift.models.basemodel:2054: -5.770412485617271e-07 <- latitude -> 9.653766028350219e-06
20:15:04 DEBUG opendrift.models.basemodel:2059: 6.558133177097597e-09 <- longitude -> 1.796617384638951e-05
20:15:04 DEBUG opendrift.models.basemodel:2062: z = 0.0
20:15:04 DEBUG opendrift.models.basemodel:2065: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.314381978749825e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
20:15:04 DEBUG opendrift.models.basemodel.environment:803: Using fallback value 0 for ocean_vertical_diffusivity for all profiles
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.312412 (min) 0.313812 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.274545 (min) 0.438553 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_wind: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: upward_sea_water_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_vertical_diffusivity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_x_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: surface_downward_y_stress: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_kinetic_energy: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: turbulent_generic_length_scale: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: ocean_mixed_layer_thickness: 50 (min) 50 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
20:15:04 DEBUG opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
20:15:04 DEBUG opendrift.models.physics_methods:1061: min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:2108: Calling OceanDrift.update()
20:15:04 DEBUG opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31220885225245e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.30907 (min) 0.314005 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.291632 (min) 0.448264 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:773: Runge-kutta 4th order...
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284616e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.310557 (min) 0.31399 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.288851 (min) 0.447312 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader double_gyre
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284611e-12 degrees.
20:15:04 DEBUG opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
20:15:04 DEBUG opendrift.models.basemodel.environment:767: Data missing for 4 elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for x_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:791: Using fallback value 0 for y_sea_water_velocity for 4 elements
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: x_sea_water_velocity: -0.311653 (min) 0.313873 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:905: y_sea_water_velocity: -0.282352 (min) 0.456712 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
20:15:04 DEBUG opendrift.models.physics_methods:933: No Stokes drift velocity available
20:15:04 DEBUG opendrift.models.oceandrift:401: No vertical advection for elements at surface
20:15:04 DEBUG opendrift.models.basemodel:1660: Horizontal diffusivity is 0, no random walk.
20:15:04 DEBUG opendrift.models.basemodel:2123: 2000 active elements (0 deactivated)
20:15:04 DEBUG opendrift.models.basemodel:2152: Cleaning up
20:15:04 DEBUG opendrift.models.basemodel.environment:607: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
20:15:04 DEBUG opendrift.models.basemodel.environment:609: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:613: Calling reader global_landmask
20:15:04 DEBUG opendrift.models.basemodel.environment:614: ----------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:630: Data needed for 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
20:15:04 DEBUG opendrift.readers.basereader.continuous:37: Fetched env-before
20:15:04 DEBUG opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
20:15:04 DEBUG opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
20:15:04 DEBUG opendrift.models.basemodel.environment:764: Obtained data for all elements.
20:15:04 DEBUG opendrift.models.basemodel.environment:777: ---------------------------------------
20:15:04 DEBUG opendrift.models.basemodel.environment:778: Finished processing all variable groups
20:15:04 DEBUG opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
20:15:04 DEBUG opendrift.models.basemodel.environment:905: land_binary_mask: 0 (min) 0 (max)
20:15:04 DEBUG opendrift.models.basemodel.environment:907: ---------------------------------
20:15:04 DEBUG opendrift.models.basemodel:659: No elements hit coastline.
20:15:04 DEBUG opendrift.models.basemodel:1709: No elements to deactivate
20:15:04 DEBUG opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
20:15:04 DEBUG opendrift.models.basemodel:2364: Setting up map: corners=None, fast=False, lscale=None
/opt/conda/envs/opendrift/lib/python3.11/site-packages/cartopy/mpl/geoaxes.py:1692: UserWarning: No data for colormapping provided via 'c'. Parameters 'cmap', 'vmin', 'vmax' will be ignored
result = super().scatter(*args, **kwargs)
20:15:05 DEBUG opendrift.models.basemodel:3044: Saving animation..
20:15:05 INFO opendrift.models.basemodel:4613: Saving animation to /root/project/docs/source/gallery/animations/example_double_gyre_LCS_particles_0.gif...
20:15:24 DEBUG opendrift.models.basemodel:4651: MPLBACKEND = agg
20:15:24 DEBUG opendrift.models.basemodel:4652: DISPLAY = None
20:15:24 DEBUG opendrift.models.basemodel:4653: Time to save animation: 0:00:19.057544
20:15:24 INFO opendrift.models.basemodel:3037: Time to make animation: 0:00:19.976402
Total running time of the script: (1 minutes 43.494 seconds)